Evaluation of low friction surface coating for an automotive cam and follower

Mohd. Kamel Wan Ibrahim, and Dearnley, P. A. (2004) Evaluation of low friction surface coating for an automotive cam and follower. In: International Conference on Advances in Surface Treatment: Research and Applications, ASTRA, 3-6 November 2003, Hyderabad.

Full text not available from this repository.

Abstract

This paper is intended to investigate the best coating material in an attempt to apply sprayed coatings on a cam and follower. A series of unidirectional pin-on-disc testing with non-additive lubricant were conducted by adopting similar condition in cam and follower in terms of sliding speed and contact stress. Sprayed molybdenum disc and alumina-titania disc were tested against steel pin and ceramic pin. About 9 combinations comprising of high load and low load have been tested. And the best material combination is selected in terms of friction and wear of such coatings in high-contact pressure application. It was found that silicon nitride and alumina-titania with 0.127 mm (0.005") nickel bonded coating was the best mating material due to its low coefficient of friction and low wear. The details of studies are presented in this paper

Item Type:Conference Paper (UNSPECIFIED)
Uncontrolled Keywords:Automotive engineering, Cams, Friction, Lubricants, Speed control, Surface structure, Contact stress, Follower, Sliding speed, Surface coatings, Sprayed coatings
Subjects:T Technology > TL Motor vehicles. Aeronautics. Astronautics
Divisions:SCHOOL > School of Engineering and Information Technology
ID Code:3566
Deposited By:IR Admin
Deposited On:22 Feb 2012 17:32
Last Modified:29 Dec 2014 16:11

Repository Staff Only: item control page


Browse Repository
Collection
   Articles
   Book
   Speeches
   Thesis
   UMS News
Search
Quick Search

   Latest Repository

Link to other Malaysia University Institutional Repository

Malaysia University Institutional Repository