Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Number of items at this level: 124.

Academic Exercise

Hiew, Cindy (2007) The mechanism of a mechanical and electronic siren prototype. Universiti Malaysia Sabah. (Unpublished)

Wong, Ging Zing (2004) Mengkaji pencirian motor arus terus. Universiti Malaysia Sabah. (Unpublished)

Mohd. Junaidi Mohd. Taib (2005) Autonomous robot with lane detection system. Universiti Malaysia Sabah. (Unpublished)

Thong, De Yong (2008) Numerical and statistical analysis of energy content of Shell-Fibre-EFB mixture 1. Universiti Malaysia Sabah. (Unpublished)

Saw, Cheng Lee (2006) Aerodynamic studies on a multistoried building model. Universiti Malaysia Sabah. (Unpublished)

Woo, Wen Tzeng (2015) Plastic collapse and energy absorption of filled tubes under quasi-static loads by computational analysis. Universiti Malaysia Sabah. (Unpublished)

Choo, Yin Pei (2015) Investigating the temperature profile of inclined solar chimney (ISC). Universiti Malaysia Sabah. (Unpublished)

Article

Chu, Chi Ming (2006) Use of chilton-colburn analogy to estimate effective plume chimney height of a forced draft, air-cooled heat exchanger. Heat Transfer Engineering, 27 (9). pp. 81-85. ISSN 0145-7632

Lim, Yee Yan and Soh, Chee Kiong (2011) Fatigue life estimation of a 1D aluminum beam under mode-I loading using the electromechanical impedance technique. Smart Materials and Structures, 20 (12). ISSN 0964-1726

Law, Leh Sung and Kim, Jong Hyun and Liew, Willey Yun Hsien and Lee, Sun Kyu (2012) An approach based on wavelet packet decomposition and HilbertHuang transform (WPDHHT) for spindle bearings condition monitoring. Mechanical Systems and Signal Processing, 33. pp. 197-211. ISSN 0888-3270

Goh H.H. and Tai C.W. and Chua Q.S. and Lee S.W. and Kok B.C. and Goh K.C. and Teo, Kenneth Tze Kin (2014) Comparative study of different Kalman filter implementations in power system stability. American Journal of Applied Sciences, 11 (8). pp. 1379-1390. ISSN 1554-3641

Nader Nassif Barsoum and Galal Elkobrosy (1996) Observation and simulation of a large signal mechanical vibrating system. Computer Methods in Applied Mechanics and Engineering, 135 (1-2). pp. 1-13.

Aminul Islam and Hamid Reza Fard Masoumi and Siow, Hwa Teo and Yadollah Abdollahi and Janaun Jidon and Yun Hin Taufiq-Yap (2016) Glycerolysis of palm fatty acid distillate for biodiesel feedstock under different reactor conditions. Fuel, 174. pp. 133-139. ISSN 0016-2361

Willey Y. H. Liew and Roonie Protasius and Jester L.J. Ling and Nancy Julius Siambun and Noor Ajian Mohd Lair (2016) Reciprocating wear behavior of mild steel carburized using Na₂CO₃-NaCl. Tribology Transactions, 95. pp. 406-418. ISSN 1040-2004

Omid Nabinejad and Liew, Willey Yun Hsien and D. Sujan and Ian J. Davies and M. E. Rahman (2016) Mechanical and thermal characterization of polyester composite containing treated wood flour from Palm oil biomass. Polymer Composites Early View (Online Version of Record published before inclusion in an issue). ISSN 1548-0569

Ag Ahmad Mohd Yunus and Mohd Sukhairi Mat Rasat and Razak Wahab and Mazlan Mohamed and Muhammad Iqbal Ahmad and Mohd Hazim Mohamad Amini and Wan Mohd Nazri Wan Abdul Rahman and Mohammad Khairul Azhar Abdul Razab (2016) Preliminary study on properties of small diameter wild Leucaena Leucocephala species as potential biomass energy sources. ARPN Journal of Engineering and Applied Sciences, 11 (9). pp. 6128-6137. ISSN 1819-6608

Muralindran Mariappan and Rosalyn R. Porle and Manimehala Nadarajan and Khoo, Brendan and Wong, Wei kitt and Vigneswaran Ramu (2014) An application on medical tele-Diagnosis robot (MTR) for real-time motion detection. Applied Mechanics and Materials, 664 (Chapte). pp. 355-359. ISSN 1660-9336

Muhammad Aqeel Ashraf and Hilmi Mahmud and Sajedeh Sadat Ghazizadeh Hashem (2015) Performance of green roofs with respect to water quality and reduction of energy consumption in tropics: a review. Renewable and Sustainable Energy Reviews, 52. pp. 669-679. ISSN 1364-0321

Liew, Willey Yun Hsien and Law, Leh-Sung and Kim, Jong Hyun and Lee, Sun-Kyu (2012) An approach based on wavelet packet decomposition and Hilbert-Huang transform (WPD-HHT) for spindle bearings condition monitoring. Mechanical Systems and Signal Processing, 33. pp. 197-211. ISSN 0888-3270

Farrah Wong and Kwang, Hyun Park and Dae, Jin Kim and Jin, Woo Jung and Zeungnam Bien (2006) Intention reading towards engineering applications for the elderly and people with disabilities. International Journal of ARM. pp. 3-15.

Md. Nazrul Islam and Mohammad H. Abedinnasab and Jaime Gallardo-Alvarado and Mario A. García-Murillo (2016) A simple approach to solving the kinematics of the 4-UPS/PS (3R1T) parallel manipulator. Journal of Mechanical Science and Technology, 30 (5). pp. 2303-2309. ISSN 1976-3824

Wan Khairul Muzammil Abd Rahim and Chong, Wen Tong and Ahmad Fazlizan and Mohamad Reza Hassan and Hamid Taheri and Mohammed Gwani and Hiren Kothari and Poh, Sin Chew (2015) Urban Eco-Greenergyâ„¢ hybrid wind-solar photovoltaic energy system and its applications. International Journal of Precision Engineering and Manufacturing, 16 (7). pp. 1263-1268. ISSN 2005-4602

Muralindran Mariappan and Chua, Tony Tung Ming and Manimehala Nadarajan (2016) Automated visual inspection: position identification of object for industrial robot application based on colour and shape. International Journal of Intelligent Systems and Applications (IJISA), 8 (1). pp. 9-17. ISSN 2074-9058

Muralindran Mariappan and Tan, Jian Hong and Jong, Chia Sing (2015) Design and fabrication of an industrial semi-automatic label Shrinking Machine for polyethylene Terephthalate (PET) bottles. International Journal of Innovative Science Engineering and Technology (IJISET), 2 (11). pp. 657-669. ISSN 2348-7968

Md Mizanur Rahman and Sivakumar Kumaresan and Chi Ming, Chu (2016) Improved thermal energy discharge rate from a temperature controlled heating source in a natural draft chimney. Applied Thermal Engineering, 98. pp. 991-1002. ISSN 1359-4311

Muralindran Mariappan and Tan, Wei Fang and Manimehala Nadarajan (2015) Human face detecting and centering for robotic vision system. International Journal of Image, Graphics and Signal Processing (IJIGSP), 12. pp. 1-9.

Muralindran Mariappan and Manimehala Nadarajan and Rosalyn Porle and Jong, Chia Sing (2015) Real-Time multi pose face tracking system for medical tele-diagnosis robot in LabVIEW platform. Australian Journal of Basic and Applied Sciences, 9 (32). pp. 238-248. ISSN 1991-8178

Jason Teo and Shun, Hoe Lim and Wei, Shun Chee and Kim, On Chin (2015) Evolutionary robotics + 3D printing = rapid & low-cost deployment of autonomous mobile robots. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8372-8378. ISSN 1819-6608

Muralindran Mariappan and Manimehala Nadarajan and Rosalyn R. Porle (2013) Development of a real-time intelligent biometric face detection and recognition system in LabVIEW. American Journal of Intelligent Systems, 3 (1). pp. 40-49. ISSN 2165-8994

Murali Krishnan, and Muralindran Mariappan, (2015) EEG-based brain-machine interface (BMI) for controlling mobile robots: the trend of prior studies. International Journal of Computer Science and Electronics Engineering (IJCSEE), 3 (2). pp. 159-165. ISSN 2320-4028

Muralindran Mariappan and Khoo, Brendan (2013) Design and development of communication and control platform for Medical Tele-diagnosis Robot (MTR). International Journal of Networks and Communications, 3 (1). pp. 12-20. ISSN 2168-4944

Haviluddin and Alfred Rayner and Joe Henry Obit and Mohd Hanafi Ahmad Hijazi and Ag. Asri Ag. Ibrahim (2015) A performance comparison of statistical and machine learning techniques in learning time series data. Advanced Science Letters, 21 (10). pp. 3037-3041. ISSN 1936-6612

Hung, Lai Po and Rayner Alfred and Mohd Hanafi Ahmad Hijazi and Ag. Asri Ag. Ibrahim (2015) A review on the ensemble framework for sentiment analysis. Advanced Science Letters, 21 (10). pp. 2957-2962.

Choo, Chee Wee and Muralindran Mariappan and Razak Mohd Ali Lee and Wong, Wei Kitt (2015) A review and design methodology of preserving piano playing techniques through contactless sensor fusion system. Journal of Applied Sciences Research (JASR), 11 (20). pp. 26-38.

Caleb Acquah and Michael K. Danquah and Dominic Agyei and Charles K. S. Moy and Amandeep Sidhu and Clarence M. Ongkudon (2015) Deploying aptameric sensing technology for rapid pandemic monitoring. Critical Reviews in Biotechnology. ISSN 0738-8551

Muralindran Mariappan and Wei, Leong Khong and Nittala Surya Venkata Kameswara Rao (2016) Analysis of heart beat rate through video imaging techniques. Journal of Telecomunication Electronic and Computer Engineering, 8 (11). pp. 69-74. ISSN 2289-8131

Adriana Amaludin and Aminaton Marto and Muhd. Hatta M. Satar and Hassanel Amaludin and Salinah Dullah (2016) Thermal properties of Malaysian cohesive soils. Jurnal Teknologi (Sciences and Engineering), 78 (8-5). pp. 53-58. ISSN 0127-9696

Azali Saudi and Jumat Sulaiman (2014) Hybrid path planning for indoor robot with Laplacian Behaviour-based control via four point-explicit group. International Journal of Imaging and Robotics, 12 (1). ISSN 2231-525X

Azali Saudi and Jumat Sulaiman (2012) Indoor Path Planning for Mobile Robot using Half-Sweep Gauss-Seidel via Nine-Point Laplacian (HSGS9L). International Journal of Engineering Research & Technology (IJERT), 1 (7). pp. 17-29. ISSN 2278-0181

Azali Saudi and Jumat Sulaiman (2012) Laplacian behaviour-based Control (LBBC) for Robot Path Planning using Explicit Group Successive Over-Relaxation via Nine-Point Laplacian (EGSOR9L) Iterative Method. International Journal of Computer and Information Technology, 1 (2). ISSN 2279-0764

Azali Saudi and Jumat Sulaiman and Mohd Hanafi Ahmad Hijazi (2014) Fast robot path planning with Laplacian Behaviour-Based control via four-point explicit decoupled group SOR. Research Journal of Applied Sciences, 9 (6). pp. 354-360. ISSN 1815-932X

A’Qilah Ahmad Dahalan and Azali Saudi and Jumat Sulaiman (2020) Robot pathfinding with obstacle avoidance capabilities in a static indoor environment via TOR iterative method using harmonic potentials. ITM Web of Conferences, 36 (1). pp. 1-7. ISSN 2271-2097

Chi, Ming Chu and Md Mizanur Rahman and Sivakumar Kumaresan (2016) Improved thermal energy discharge rate from a temperature-controlled heating source in a natural draft chimney. Applied Thermal Engineering, 98. pp. 991-1002. ISSN 1359-4311

Chin, Kim On and Teo, Jason Tze Wi (2009) Evolution of RF-signal cognition for wheeled mobile robots using pareto multi-objective optimization. International Journal of Hybrid Information Technology, 2 (1). pp. 31-44. ISSN 1738-9968

Chin, Kim On and Teo, Kein Yau and Rayner Alfred and Teo, Jason Tze Wi and Patricia Anthony and Wang, Cheng (2016) Backpropagation neural ensemble for localizing and recognizing non-standardized Malaysia’s car plates. International Journal on Advanced Science, Engineering and Information Technology, 6 (6). pp. 1112-1119. ISSN 2088-5334

Choo W. Foong and K. Krishnaiah and Jidon Janaun and Duvvuri Subbarao and Auti Prabhakar (2009) Heat and mass transfer studies of palm kernel cake (PKC) in fluidized bed fermenter. Industrial Crops and Products, 30 (2). pp. 227-234. ISSN 0926-6690

Chua, Bih Lii and Mohd Suffian Misaran and Farm, Yan Yan and Mizanur Rahman and Benjoe Eldana Barahim (2014) Development of Mixed Vertical Axis Wind Turbine (MVAWT) for low wind condition. Applied Mechanics and Materials, 660. pp. 811-815. ISSN 1660-9336

Elffie Yunus and Hidayati Asrah and Ahmad Nurfaidhi Rizalman (2019) Compressive strength of eco-processed Pozzolan concrete under Chloride and Sulphate exposure. Journal of Advanced Research in Applied Mechanics, 59 (1). pp. 1-9. ISSN 2289-7895

Harimi Djamila and Chu, Chi Ming and Sivakumar Kumaresan (2016) Comparative study of natural and artificial wind for thermal comfort studies. International Journal of Engineering Research & Technology (IJERT), 5 (9). pp. 516-520. ISSN 2278-0181

I.A.Rahman and P.Vejayakumaran and Coswald Stephen Sipaut @ Mohd Nasri and J.Ismail and C.K.Chee (2009) Size-dependent physicochemical and optical properties of silica nanoparticles. Materials Chemistry and Physics, 114 (1). pp. 328-332. ISSN 0254-0584

Jaime Gallardo-Alvarado and Mario A. García-Murillo and Md Nazrul Islam and Mohammad H. Abedinnasab (2016) A simple approach to solve the kinematics and dynamics of the 4-UPS/PS (3R1T) parallel manipulator. Journal of Mechanical Science and Technology, 30 (5). pp. 2303-2309. ISSN 1738-494X (Print) 1976-3824 (Online)

Jason Teo and Hussein A. Abbass (2003) Search space difficulty of evolutionary Neuro-controlled legged robots. International Journal of Knowledge-Based and Intelligent Engineering Systems, 7 (3). pp. 149-156. ISSN 1327-2314

Kok, Luong Goh and Giap, Weng Ng and Muzaffar Hamzah and Soo, See Chai (2020) A comparative study of interactive segmentation with different number of strokes on complex images. International Journal on Advanced Science, Engineering and Information Technology, 10 (1). pp. 178-184. ISSN 2088-5334

Liew, Willey Yun Hsien (2004) The effect of air in the machining of aluminium alloy. Tribology Letters, 17 (1). pp. 41-49. ISSN 1573-2711

Liew, Willey Yun Hsien and I. M. Hutchings and J.A Williams (1998) Friction and lubrication effects in the machining of aluminium alloys. Tribology Letters, 5 (1). pp. 117-122. ISSN 1573-2711

Lorita Angeline and Hui, Keng Lau and Bablu Kumar Ghosh and Hui, Hwang Goh and Tze, Kenneth Kin Teo (2012) Development of a license plate recognition system for a non-ideal environment. International Journal of Simulation Systems, Science & Technology, IJSSST, 13 (3C). pp. 26-33. ISSN 1473-804x

Majid Farajpourlar and Jidon Janaun and Asadollah Kariman (2015) Gas flow through vertical pipe and perforated vertical pipe. International Journal of ChemTech Research, 7 (6). pp. 2589-2595. ISSN 0974-4290

Md Mizanur Rahman and Mohd. Suffian Bin Misaran and Mohd. Jamrye Bin Jamanun and Ahmed Jawad (2018) Estimate the Ventilation Effect from Wire Mesh Screen Assisted Solar Chimney. Journal of Energy and Power Engineering, 12. pp. 127-131.

Md Mizanur Rahman and Tan, Jian Hong and Tang, Raymond and Ling, Leh Sung and Fadzilah Mohd Tamiri (2016) Experimental study the effects of water pressure and turbine blade lengths & numbers on the model free vortex power generation system. International Journal of Current Trends in Engineering & Research (IJCTER), 2 (9). pp. 13-17. ISSN 2455–1392

Md Nazrul Islam and Jaime Gallardo-Alvarado and Othman bin Ahmad and Ali Farzamnia and Zakariah Aris (2016) Sensor based line follower self-driving car (sCar) with Obstacles Avoidance. International Academic Research Journal of Business and Technology, 2 (2). pp. 96-101.

Md. Mizanur Rahman and Md. Assad-Uz-zaman and Mohammad Mashud (2014) Performance evaluation of water Jet Pump for Nozzle to throat area ratios on suction lift. International Journal of Mechanical & Mechatronics Engineering IJMME, 14 (3). pp. 45-47.

Md. Mizanur Rahman and Mohd. Suffian Bin Misaran and Mohd. Jamrye Bin Jamanun and Ahmed Jawad (2018) Estimate the Ventilation Effect from Wire Mesh Screen Assisted Solar Chimney. Journal of Energy and Power Engineering, 12. pp. 127-131.

Mohd Azlan Ismail and Al Khalid Othman and Hushairi Zen and Mohd Suffian Misaran (2016) CFD Modelling of pump as turbine with various number of blade for microhydro system. Journal of Applied Science & Process Engineering, 3 (1). pp. 17-23. ISSN 2289-7771

Mohd Kamal Mohd Shah and Sapuan SM and Al-Fareez Bin-Aslie and Irma Wani Othman and Sarifudin J (2017) Fracture properties investigation of Artocarpus Odoratissimus composite with Polypropylene (PP). Journal of Applied Mechanical Engineering, 6 (2). pp. 1-5. ISSN 2168-9873

Mohd Suffian Misaran and Rossalam Sarbatly and Md Mizanur Rahman (2014) Rheological properties of Kaolin/PolyetherSulfone(PESf) used in Hollow Fiber Fabrication: effects of content ratio. Scientific.net: Applied mechanics and materials, 660. pp. 244-248.

Muhammad Iftikhar Hanif and Muralindran Mariappan (2010) Future of remote presence in developing countries and its applications in medicine (robot to otorob). International Journal of Online Engineering (iJOE), 6 (4). pp. 40-43. ISSN 1861-2121

Muralindran Mariappan and Manimehala Nadarajan and Rosalyn R Porle and Norfarariyanti Parimon (2016) Towards real-time visual biometric authentication using human face for healthcare telepresence mobile robots. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8 (11). pp. 51-56.

Muralindran Mariappan and Thayabaren Ganesan and Vigneswaran Ramu and Muhammad Ifthikar (2011) Safety system for non-interventional flexible robotic arm of Orthopaedic Robot (OTOROB) using fuzzy logic. American Journal of Intelligent Systems, 1 (1). pp. 22-31. ISSN 2165-8994

Muralindran Mariappan and Vigneswaran Ramu and Thayabaren Ganesan (2011) Fuzzy Logic Based Navigation Safety System for a Remote Controlled Orthopaedic Robot (OTOROB). International Journal of Robotics Research and Development (IJRRD), 1 (1). pp. 21-41.

Mutaz Hamed Hussien Khairi and Sharifah Hafizah Syed Ariffin and Nurul Mu'azzah Abdul Latiff and Kamaludin Mohamad Yusof and Mohamed Khalafalla Hassan and Fahad Taha Al-Dhief and Mosab Hamda and Suleman Khan and Muzaffar Hamzah (2021) Detection and classification of conflict flows in SDN using machine learning algorithms. IEEE Access, 9. pp. 76024-76037. ISSN 2169-3536

Ng, Mun Kit and Chong, Yung Wey and Ko, Kwang man and Park, Young Hoon and Leau, Yu Beng (2020) Adaptive path finding algorithm in dynamic environment for warehouse robot. Neural Computing and Applications. ISSN 0941-0643

Ngu War Hlaing and Ali Farzamnia and Muralindran Mariappan and Manas Kumar Haldar (2020) Network-coded MIMO-NOMA systems with FEC codes in two-way relay networks. International Journal of Communication Systems. pp. 1-16.

Noor Ajian Mohd Lair and Chuan, Kian Pang and Liew, Willey Yun Hsien and Hardy Semui and Loh, Zhia Yew (2013) An EOQ based multi-storage location of spare part inventories: a case study. Applied Mechanics and Materials, 315. pp. 733-738. ISSN 1660-9336

Nooralisa Mohd Tuah and Ainnecia Yoag and Fatimah Ahmedy (2021) MyDiabetes—the gamified application for diabetes self-management and care. Computers, 10 (50). pp. 1-15. ISSN 2073-431X

Norasyimah Sahat and Afishah Alias and Fouziah Md Yassin (2018) Brainwave Analysis for Robot Movement Depending on Age and Sex Differences. International Journal of Engineering and Technology, 7 (4.30). pp. 276-280.

Nurmin Bolong and Rosdianah Ramli (2016) Surface water treatment by custom-made mobile water treatment system. Jurnal Teknologi, 78 (12). pp. 25-30.

Nurul Shahadahtul Afizah Asman and Salinah Dullah and Janice Lynn Ayog and Adriana Amaludin and Hassanel Amaludin and Lim, Chung Han and Aslina Baharum (2017) Mechanical properties of concrete using eggshell ash and rice husk ash as partial replacement of cement. MATEC Web of Conferences, 103. pp. 1-6. ISSN 2261236X

Rayner Pailus and Rayner Alfred (2020) A robust illumination-invariant face recognition based on fusion of thermal IR, maximum filter and visible image. TEST: Engineering and Management, 83. pp. 5294-5302. ISSN 0193 - 4120

S. Fadhilah Ibrahim and Nurul Asikin Mijan and Mohd Lokman Ibrahim and Abdulkareem Ghassan Alsultan and Mohd Izham bin Saiman and Yap, Taufiq Yun Hin (2020) Sulfonated functionalization of carbon derived corncob residue via hydrothermal synthesis route for esterification of palm fatty acid distillate. Energy Conversion and Management, 210. ISSN 1968904

Sokkalingam Rajalingam and Awang Bono and Jumat Sulaiman (2012) Identifying the critical moulding machine parameters affecting injection moulding process by basic statistical process control tools. International Journal of Engineering and Physical Sciences, 6. pp. 358-364. ISSN 2010-3778

Wen, Tong Chong and Mohammed Gwani and Chin Joo Tan and Wan Khairul Muzammil Abd Rahim and Sin, Chew Poh and Kok Hoe Wong (2017) Design and testing of a novel building integrated cross axis wind turbine. Applied Sciences, 7 (3). p. 251. ISSN 2076-3417

X. Ding and Liew, Willey Yun Hsien and B.K.A. Ngoi and J.G.K. Gan and S.H. Yeo (2002) Wear of CBN tools in ultra-precision machining of STAVAX. Tribology Letters, Springer, 12 (1). pp. 3-12.

Yee, Yan Lim and Yun, Willey Hsien Liew and Chee, Kiong Siew (2015) A parametric study on admittance signatures of PZT transducer under free vibration. Journal Mechanics of Advanced Materials and Structures, 22 (11). pp. 877-884. ISSN 1537-6494

Yeo, Kiam Beng and Woo, Wen Tzeng (2016) Plastic collapse and energy absorption of circular filled tubes under quasi-static loads by computational analysis. Journal of Mechanical Science and Technology, 31 (2). pp. 633-639. ISSN 1738-494X (Print) 1976-3824 (Online)

Zeckrey Jikurun and Ahmad Mukifza Harun and Shahril Yusof (2018) Investigation Study of Effectiveness Solar Renewable Energy Installation at on Site Installation. International Journal of Recent Research in Electrical and Electronics Engineering (IJRREEE), 5 (4). pp. 1-13. ISSN 2349-7815

azmi Sofian Suhaimi and James Mountstephens and Jason Teo (2020) Parameter tuning for enhancing inter-subject emotion classification in four classes for vr-eeg predictive analytics. International Journal of Advanced Science and Technology, 29 (6s). p. 1483.

Chapter In Book

Teo, Jason Tze Wi and Lynnie D. Neri and Nguyen, Minh H. and Hussein A. Abbass (2008) Walking with EMO: Multi-objective robotics for evolving two, four, and six-legged locomotion. Multi-Objective Optimization in Computational Intelligence: Theory and Practice. pp. 300-332. ISSN 978-159904498-9

Conference or Workshop Item

Ernie Che Mid and Yang, Soo Siang (2011) Modified feedback configuration via observer based sensor compensation. In: 2011 2nd International Conference on Instrumentation Control and Automation, ICA 2011, 15-17 November 2011, Bandung, Indonesia.

Tan, M. K. and Chin, Y. K. and Tham, Heng Jin and Teo, Kenneth Tze Kin (2011) Evolutionary optimization scheme for Exothermic Process Control System. In: Proceedings of the 3rd (2011) CUTSE International Conference, 8-9 November, 2011, Miri, Sarawak, Malaysia.

Yona Falinie Abdul Gaus and Wong, Hock Tze @ Farrah Wong (2012) Hidden Markov Model - Based gesture recognition with overlapping hand-head/hand-hand estimated using Kalman Filter. In: 3rd International Conference on Intelligent Systems, Modelling and Simulation (ISMS 2012) , 8-10 February 2012, Kota Kinabalu, Sabah, Malaysia.

Nurmin Bolong and Divya Pogaku and Khairul Anuar Mohamad and U. Hashim and H.M. Zuhir and Ismail Saad and Chan, Bun Seng and A R Abu Bakar (2013) Body doping analysis of vertical strained-SiGe Impact Ionization MOSFET incorporating dielectric pocket (VESIMOS-DP). In: Micro and Nanoelectronics (RSM), 2013 IEEE Regional Symposium.

N Murali Krishnan and Muralindran Mariappan and Karthigayan Muthukaruppan and Mohd Hanafi Ahmad Hijazi and Wong, Wei Kitt (2016) Electroencephalography (EEG) based control in assistive mobile robots: A review. In: UNSPECIFIED.

Zi, Sheng Tang and Nurmin Bolong and Ismail Saad and Janice Lynn Ayog (2016) The morphology of electrospun titanium dioxide nanofibers and its influencing factors. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015.

Justin Sentian and F. M Markos (2016) Potential of solar energy in Kota Kinabalu, Sabah: an estimate using a photovoltaic system model. In: 4th International conference on Science & Engineering In Mathematics, Chemistry And Physics 2016 (SCIETECH 2016), 30 - 31 January 2016, Bali, Indonesia.

Sivakumar Kumaresan and Md Mizanur Rahman and Chu, Christopher C. M. (2016) CFD simulation and experimental data for a fixed heat load natural draft air cooled heat exchanger with cold inflow mitigation. In: ASME 2015 Power Conference, POWER2015, 28 Jun - 2 Julai 2015, San Diego, California.

Mohd Suffian Misaran and Md Mizanur Rahman and Ling, Leh Sung and Fadzlita Mohd Tamiri (2016) Evaluate Performance of Earth – Air – Pipe System under Laboratory Condition. In: International Conference on Industrial Engineering and Operations Management, 8-10 March 2016, Kuala Lumpur, Malaysia.

Md Abdul Manan and Mohd Kamal Mohd Shah and Perowansa Paruka (2013) Influence of axial and oblique impact loads on crush response properties of square tube structures made with FRP pultruded composites. In: Malaysian International Tribology Conference in 2013 (MITC2013), 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Azali Saudi and Jumat Sulaiman (2012) Robot path planning using four point-explicit group via nine-point laplacian (4EG9L) iterative method. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 4 - 6 September 2012, Kuching, Sarawak, Malaysia.

Adrian Jidon Januan and Nor Hidayah Kamin and K. H. Wong and H. J. Tham and Valerian Victor Kong and Majid Farajpourlar (2015) Design and simulation of heat exchangers using Aspen HYSYS, and Aspen exchanger design and rating for paddy drying application. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 - 12 December 2015, The Pacific Sutera Hotel Kota Kinabalu, Sabah.

Hamzarul Alif Hamzah and Norah Tuah and Lim, Kit Guan and Tan, Min Keng and Ismail Saad and Tze, Kenneth,Kin Teo (2020) Genetic Algorithm based Chain Leader Election in Wireless Sensor Network for Precision Farming. In: IEEE 2nd International Conference on Artificial Intelligence in Engineering and Technology, 26-27 Sep 2020, Kota Kinabalu, Malaysia.

Mohammad Khatim Hasan and Jumat Sulaiman and Samsul Ariffin Abdul Karim (2014) Heat simulation via scilab programming. In: Proceedings of the 21st National Symposium on Mathematical Sciences (SKSM21), 6-8 November 2013, Penang, Malaysia.

Yumee Kim and Kukjin Chun and Ismail Saad (2020) Monolithic integration of tunable aperture and lens for distance sensor. In: 2020 International Conference on Electronics, Information, and Communication (ICEIC), 02 April 2020, Barcelona, Spain, Spain.

Zykamilia Kamin and N Abdulrahim and Mailin Misson and C Chel Ken (2020) Melt blown polypropylene nanofiber template for homogenous pore channels monoliths. In: Energy Security and Chemical Engineering Congress.

Research Report

Chan, Eng Seng and Pogaku Ravindra (2007) Production of precision K-Carrageenan Microcapsule by Co-Flowing Microfluidic system. (Unpublished)

Hanafi Ahmad Hijazi and Patricia Anthony (2006) Development of a Bioinspired optimization algorithm for the automatic generation of multiple distinct behaviors in simulated mobile robots. (Unpublished)

Mohd Suffian Misaran (2013) Behaviours of non-newtonian flow mechanism through hollow tube spinneret for hollow fiber membrane spinning process. (Unpublished)

Murni Sundang (2010) Determination of phenolic and flavonoid contents, and antioxidant activity for Piper Betle and Leucosyke Capitella using different solvent for extraction. (Unpublished)

Rosalam Hj. Sarbatly (2011) Geothermal Water Desalination by Elastomeric Rubbers Nanofibre Membrane Distillation. (Unpublished)

Teo, Jason Tze Wi and Johnny Koh and Chin, Kim On and Chua, Bih Lii and Willey Liew and Noor Ajian Mohd. Lair and Lim, Shun Hoe (2012) Automatic design, optimization and In-Situ Fabrication of Heterogeneous Swarm Robot bodies using 3-D printing and multi-objective evolutionary algorithms. (Unpublished)

Thesis

Choong, Wai Heng (2008) Material depositing robot arm for arc welding: Structure & driving mechanism. Masters thesis, Universiti Malaysia Sabah.

Muralindran Mariappan (2004) Design, development and calibration of a robotic wrist force sensor. Masters thesis, Universiti Malaysia Sabah.

Muralindran Mariappan (2008) Development and real time control of an arm for patient assistance for lifting mobility robot (Palm bot). ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Universiti Malaysia Sabah.

Chua, Bih Lii (2007) Design of spherical wrist and trajectory solution for robotic arc welding application. Masters thesis, Universiti Malaysia Sabah.

Siow, Ping Chuan (2009) Performance of coated carbide tool in low speed milling of stainless steel under flood and mist lubrication. Masters thesis, Universiti Malaysia Sabah.

Thangamani Uthirapathi (2007) Piezoresistive strain gauge sensor and signal conditioner for sensor applications. Masters thesis, Universiti Malaysia Sabah.

Chiam, Chel Ken (2014) Characterisation of heat and mass transfer in the rectangular flat-sheet polyvinylidene fluoride membrane for vacuum membrane distillation. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Universiti Malaysia Sabah.

Wong, Wei Kitt (2012) Design and modelling of an autonomous robotic airship with soft computing control. Masters thesis, Universiti Malaysia Sabah.

Vigneswaran Ramu (2012) Development of fuzzy navigation and instrumentation system for telediagnostic mobile robot. Masters thesis, Universiti Malaysia Sabah.

Angel Kuok Mei Erh (2019) Synthesis and characterization of waterborne polyurethane dispersion for antifouling paint. Masters thesis, Universiti Malaysia Sabah.

Chee, Wei Shun (2016) Realization of multi-objective evolved continuum robots using 3D printing. Masters thesis, Universiti Malaysia Sabah.

Conny Liew (2019) Moving camera automatic number plate recognition using neural network in android platform. Masters thesis, Universiti Malaysia Sabah.

Lim, Phaik Kuan (2009) Predictor agent for online auction closing price. Masters thesis, Universiti Malaysia Sabah.

Lim, Shun Hoe (2016) Design, optimisation and fabrication of a climbing six articulated-wheeled robot using the artificial evolution and 3D printing. Masters thesis, Universiti Malaysia Sabah.

Miron Gakim (2018) Development and study of Molten salt electrode position system using different voltage feeding. Doctoral thesis, University Malaysia Sabah.

This list was generated on Fri Dec 13 14:31:47 2024 +08.