Items where Subject is "T Technology > TP Chemical technology > TP1-1185 Chemical technology > TP1080-1185 Polymers and polymer manufacture"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: A | C | F | K | L | N | R | S
Number of items at this level: 16.

A

Awang Bono and Rosalam Sarbatly and Subalinee Kaluvan and Mariani Rajin and Krishnaiah, Duduku (2008) Effect of mixture components on the properties of MUF resin. International Journal of Physical Sciences, 3 (2). pp. 45-49. ISSN 1992-1950

A T Nazaruddin and M S Shakri and M A Ladin and M A Hafez (2022) Strength and consolidation index parameters of stabilise clay soil using scrap rubber tyre.

Aris Doyan and Susilawati Susilawati and Saiful Prayogi and Muhammad Roil Bilad and Muhamad Fatikul Arif and Noor Maizura Ismail (2021) Polymer film blend of polyvinyl alcohol, trichloroethylene and cresol red for gamma radiation dosimetry. Polymers, 13. pp. 1-15. ISSN 20734360

C

Coswald Stephen Sipaut @ Mohd Nasri and N. Ahmad and R. Adnan and Ismail Ab Rahman and M. N M Ibrahim (2010) Effects of starting material and reaction temperature on the morphology and physical properties of polyurethane foams. Cellular Polymers, 29 (1). pp. 1-25. ISSN 0262-4893

Chong, W. H. and Yeo, Kiam Beng and Fadzlita Mohd Tamiri (2011) Impact damage behaviour of woven glass fibre reinforced polymer composite. Journal of Applied Sciences, 11 (13). pp. 2440-2443. ISSN 1812-5654

Coswald Stephen Sipaut @ Mohd Nasri and Rachel Fran Mansa and A. R. Yugis and Mohamad Nasir Mohamad Ibrahim and Zulkifli Mohamad Ariff and A. A. A. Abdullah (2012) The effect of different peroxide on LDPE foam properties in the presence of polyfunctional monomers. Cellular Polymers, 31 (3). pp. 145-164. ISSN 0262-4893

C. L. Yip and H. M. Mohamad and H. Ahmad (2023) Fracture energy measurement in different concrete grades. International journal of integrated engineering, 15 (2). pp. 1-8. ISSN 2229-838X

F

Fadil, Fatirah and Adli, Farah Atiqah and Nor Affandi, Nor Dalila and Harun, Ahmad Mukifza and Alam, Mohammad Khursheed (2020) Dope-Dyeing of Polyvinyl Alcohol (PVA) Nanofibres with Remazol Yellow FG. MDPI: Polymers, 12 (12). pp. 1-13. ISSN 2073-4360

K

Kui-Fern Chin and Chang-Yii Chai and Ismail Saad and Asfarina Abu Bakar and Megat Muhammad Ikhsan Megat Hasnan and Lily Yong (2023) Development of a flexible rogowski coil sensor for partial discharge detection in power cables.

L

Lee, Boon Beng and Chan, Eng Seng and Pogaku, Ravindra and Khan, Tanveer Ahmad (2012) Surface tension of viscous biopolymer solutions measured using the du Nouy ring method and the drop weight methods. Polymer Bulletin, 69 (4). pp. 471-489. ISSN 0170-0839

N

Nur Faezah Ibadat and Clarence M. Ongkudon and Suryani Saallah and Mailin Misson (2021) Synthesis and characterization of polymeric microspheres template for a homogeneous and porous monolith. Polymers, 13. pp. 1-12. ISSN 2073-4360

Nurul Hazwani Abd Hilmi and Valeritta Lodin and Melissa Sharmah Gilbert Jesuet and Sabiha Salim and Seng Hua Lee and Naruhito Hori and Akio Takemura and Ismawati Palle (2023) Biodegradability properties of polyurethane film made from Eucalyptus pellita wood polyol. Borneo International Journal of Biotechnology (BIJB), 3. pp. 1-12. ISSN 2716-697X

R

Ramachandran Nagarajan (2003) Development Of Fuzzv Logic Controllers In Manufacturing Of Resin Adhesives For Wood Industries. (Submitted)

S

Syamsul Qamar Wahirudin (2005) Preparation and characterization of poly (hydroxamic acid) chelating resin. Universiti Malaysia Sabah. (Unpublished)

Sazali Yaacob (1998) Automatic tuning for process control. (Submitted)

Suryani Saallah and M. Nazli Naim and Mohd Noriznan Mokhtar and Noor Fitrah Abu Bakar and Masao Gen and Lenggoro, I. Wuled (2021) Preparation and characterisation of cyclodextrin glucanotransferase enzyme immobilised in electrospun nanofibrous membrane. Journal of Fiber Science and Technology, 73. pp. 251-260. ISSN 0037-9875

This list was generated on Mon May 27 01:35:53 2024 +08.