Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Y | Z
Number of items at this level: 206.


Akinola J. Olarewaju, and Rao, Nittala Surya Venkata Kameswara and Md. Abdul Mannan, (2010) Response of underground pipes due to blast loads by simulation - an overview. Electronic Journal of Geotechnical Engineering, 15H. pp. 1-22. ISSN 1089-3032

Akinola J. Olarewaju, and Rao, Nittala Surya Venkata Kameswara and Md. Abdul Mannan, (2010) Blast effects on underground pipes. Electronic Journal of Geotechnical Engineering, 15G. pp. 1-14. ISSN 1089-3032

Aminul Islam, and Chan, Eng-Seng and M. Moniruzzaman, and Pogaku Ravindra, and Yun Hin Taufiq-Yap, (2013) Development of a procedure for spherical alginate–boehmite particle preparation. Advanced Powder Technology. ISSN 0921-8831

Aminul Islam, and Taufiq-Yap, Yun Hui and Pogaku, Ravindra and Chan, Eng Seng and Chu, Chi Ming (2013) Transesterification of palm oil using KF and NaNO3 catalysts supported onspherical millimetric γ-Al2O3. Renewable Energy, 59. pp. 23-29. ISSN 0960-1481

Awang Bono, and S.M. Anisuzzaman, and Ong Wan Ding, (2012) Effect of process conditions on the gel viscosity and gel strength of semi-refined carrageenan (SRC)produced from seaweed (Kappaphycus alvarezii). Journal of King Saud University – Engineering Sciences. ISSN 1018-3639

Awang Bono, and H.K. Chiw, and Nur Maizura Ismail, and S.M. Anisuzzaman, and Sariah Binti Saalah, (2011) Effects of various particles size of PKM as filler in Melamine-Urea Formaldehyde (MUF) resin on performance. In: ICCEAM, 28-30 Mei 2011, China. (Submitted)

Abdullah Chik, and Nazli Ahmad Aini, and Haider F. Abdul Amir, (2014) Physical characteristic of Zn doped soft ferrites MxZn 1-x Fe2O4. Key Engineering Materials, 594-59. pp. 39-43. ISSN 10139826

Abdul Karim Mirasa, and M. Abedi, and M.S. Fathi, and N.M. Rawai, (2016) Integrated collaborative tools for precast supply chain management. Scientia Iranica, 23 (2). pp. 429-448. ISSN 1026-3098

Asmahani Awang, and Sib Krishna Rishna Ghoshal, and Md Rahim Sahar, and Ramli Arifin, (2016) Tailoring spectroscopic properties of Er3+doped zinc sodium tellurite glass via gold nanoparticles. Jurnal Teknologi, 78 (3-2). pp. 139-144. ISSN 0127-9696

Abu Zahrim Yaser, and Ricky L. N. S., and Shahril Yusof, and Rosalam Sarbatly, and Nurmin Bolong, and Ahmad Mukifza Harun, and Azreen Ibrahim, (2015) Partly decomposed empty fruit bunch fiber as a potential adsorbent for ammonia-nitrogen from urban drainage water. Proceedings of the International Civil and Infrastructure Engineering Conference 2014 (7). pp. 989-1001. ISSN 978-981-287-289-0

Abu Zahrim Yaser, and A. Nasimah, and N. Hilal, (2015) Coagulation/Flocculation of lignin aqueous solution in single stage mixing tank system: modeling and optimization by response surface methodology. Journal of Environmental Chemical Engineering, 3 (3). pp. 2145-2154.

Ahmad Fairus Md Yusof, (2004) Rekabentuk pembilang optikal yang praktikal. Universiti Malaysia Sabah. (Unpublished)

Abu Zahrim Yaser, and C. Tizaoui, and N. Hilal, (2011) Removal of highly concentrated industrial grade leather dye: Study on several flocculation and sand filtration parameters. Separation Science and Technology, 46. pp. 883-892. ISSN 1520-5754

Ahmad Nurfaidhi Rizalman, and Ng, Seong Yap and Mahmood Md Tahir, and Shahrin Mohammad, (2018) Parametric Study of Fire Performance of Concrete Filled Hollow Steel Section Columns with Circular and Square Cross-Section. E3S Web of Conferences, 34. pp. 1-8.

Andrew Bimba, and Norisma Idris, and Norazlina Khamis, and Nurul Fazmidar Mohd Noor, (2016) Stemming Hausa text: using affix-stripping rules and reference look-up. Language Resources and Evaluation, 50 (3). pp. 687-703.

Ariff Bukhari Ahmad Basri, (2014) Analisis naratif teknik kesan khas visual (vfx) dalam filem Hikayat Merong Mahawangsa dan Libas. Masters thesis, Universiti Malaysia Sabah.

Asmawan Mohd Sarman, Management of building mosque in Malaysia. World Journal of Engineering Research and Technology WJERT, 4 (3). pp. 48-56. ISSN 2454-695X

Awang Bono, and Jumat Sulaiman, and S. Rajalingam, (2014) Analysis of optimal injection moulding process parameters for thin-shell plastic product using response surface methodology. Journal of Applied Sciences, 14 (23). pp. 3192-3201. ISSN 1812-5654

Azaizul Ahmad, (2006) Penyediaan dan pencirian filem nipis aloi emas-Palladium (Au-Pd). Universiti Malaysia Sabah. (Unpublished)


Bablu K. Ghosh, and Saiful S. M. Zainal, and Ismail Saad, and Khairul Anuar Mohamad, (2016) InGaN photocell significant efficiency enhancement on Si–an influence of interlayer physical properties. International Journal of Energy Research, 40 (9). pp. 1271-1279. ISSN 1099-114X

Bablu K. Ghosh, and Abdul I. A. Rani, and Khairul A. Mohamad, and Ismail Saad, (2020) Low Leakage Current by Solution Processed PTAA-ZnO Transparent Hybrid Hetero-Junction Device. Electronic Materials Letters. pp. 1-9.


Chu, Christopher (2005) Improved heat transfer predictions for air-cooked heat exchangers. Chemical Engineering Prograesses, 101 (11). pp. 46-48. ISSN 0360-7275

Coswald Stephen Sipaut @ Mohd Nasri, and Ismail Ab Rahman, and Mohammad Jafarzadeh, (2012) Synthesis of silica–polypyrrole core–shell nanocomposite using in situ γ-aminopropyltriethoxysilane (APTES)-modified nanosilica. Synthetic Metals, 162 (5-6). pp. 466-476. ISSN 0379-6779

Chin, Chia Seet and Prabhakaran Neelakantan, and Yoong, Hou Pin and Teo, Kenneth Tze Kin (2011) Optimisation of fuzzy based maximum power point tracking in pv system for rapidly changing solar irradiance. Global Journal of Technology & Optimization (GJTO), 2. pp. 130-137. ISSN 2229-8711

Chia, Yee Shin and Teo, Kenneth Tze Kin. and Yang, Soo Siang and Yew, Hoe Tung and Siew, Zhan Wei (2012) An evolutionary algorithm for channel assignment problem in wireless mobile networks. ICTACT Journal on Communication Technology (IJCT). pp. 613-618. ISSN 2229-6948

Chuah, Puoi Choo and Aini Janteng, (2013) Estimate on the second hankel functional for a subclass of close-to-convex functions with respect to symmetric points. International Journal of Mathematical Analysis, 7 (16). pp. 781-788. ISSN 1312-8876

Chow, Man Sang and Jedol Dayou, and Willey Y. H. Liew, (2013) Increasing the Output from Piezoelectric Energy Harvester Using Width-Split Method with Verification. International Journal of Precision Engineering and Manufacturing, 14 (12). pp. 2149-2155. ISSN 2005-4602

Chang, Kee Tong and Chin, Kim On and Jason Teo, and Chua, Bih Lii (2011) Automatic Generation of Real Time Strategy Tournament Units using Differential Evolution. In: UNSPECIFIED. (Unpublished)

Coswald Stephen Sipaut @ Mohd Nasri, and Rachel Fran Mansa, and Vejayakumaran Padavettan, and Ismail Ab. Rahman, and Jedol Dayou, and Mohammad Jafarzadeh, (2015) The effect of surface modification of silica nanoparticles on the morphological and mechanical properties of bismaleimide/diamine matrices. Advances in Polymer Technology, 34 (2).

Chu, Chi-Ming and Md Mizanur Rahman, and Sivakumar Kumaresan, (2016) Improved thermal energy discharge rate from a temperature-controlled heating source in a natural draft chimney. Applied Thermal Engineering, 98. pp. 991-1002.

Coswald Stephen Sipaut @ Mohd Nasri, and Soheila Faraji, and Afidah Abdul Rahim, and Norita Mohamed, and Bothi Raja, (2011) The influence of SiC particles on the corrosion resistance of electroless, Cu–P composite coating in 1 M HCl. Materials Chemistry and Physics, 129 (3). pp. 1063-1070. ISSN 0254-0584

Chan, Kok Peng (2007) Analysis and design of multi-storeyed buildings using STAAD.PRO and ESTEEM. University Malaysia Sabah. (Unpublished)

Caleb Acquah, and Michael K. Danquah, and Charles K. S. Moy, and Clarence M. Ongkudon, (2016) In‐process thermochemical analysis of in situ poly(ethylene glycol methacrylate‐co‐glycidyl methacrylate) monolithic adsorbent synthesis. Journal of Applied Polymer Science, 133 (22). ISSN 0021-8995

Chew, Ing Ming and Wong, F., and Awang Bono, and Jobrun Nandong, and Wong, K.I., (2020) Genetic algorithm optimization analysis for temperature control system using cascade control loop model. International Journal of Computing and Digital Systems, 9 (1). ISSN (2210-142X

Chiam, Chel Ken and R Azierah, and Rosalam Sarbatly, (2020) Enlargement of oil droplets by using asymmetric structure of polyvinylidene fluoride membranes. Fourth International Congress on Information and Communication Technology.

Chiam, Chel Ken and Zykamilia Kamin, and K. Duduku, and M. Nurashiqin, and Noor Maizura Ismail, and Rosalam Sarbatly, (2019) Coalescence of Oil Droplets using Sponge-like Structure of Polyvinylidene Fluoride Membranes. J. Applied Membrane Science & Technology, 23 (1). pp. 25-35.

Chin, Kim On and Patricia Anthony, and Boo, Vooi Keong and Rosalam Sarbatly, (2012) Meta search engine powered by DBpedia. (Unpublished)

Chong, Chee Siang (2018) Dynamic responses of plates and slabs due to impact loads. Doctoral thesis, University Malaysia Sabah.

Chu, Chi Ming and Sivakumar Kumaresan, and Tham Heng Jin, (2013) A study of mechanism for the prevention of cold inflow into Chimneys using wire mesh. (Unpublished)

Chua, Bee Seok and Harris Shah Abd Hamid, and Jasmine Adela Mutang, (2018) Psychometric Properties of the State-Trait Anxiety Inventory (Form Y) among Malaysian University Students. Sustainability, 10 (9). pp. 1-13.

Chua, Bih Lii and Ho-Jin Lee, and Dong-Gyu Ahn, (2020) Estimation of Appropriate Process Parameters for a Plasma Electron Beam Re-Melting Process Using Finite Element Analysis. Journal of the Korean Society for Precision Engineering, 37 (1). pp. 75-82. ISSN 1225-9071

Collin G. Joseph, and Awang Bono, and Duduku Krishnaiah, and Chow, Yee Ling and Ng, Chiew Ban (2009) Morphology And Sorption Kinetic Studies Of L Type Activated Carbons Prepared From Oil Palm Shells By ZnCl2 And H3PO4 Activation. Journal of Applied Sciences, 9 (17). pp. 3131-3135. ISSN 1812-5654

Coswald Stephen Sipaut @ Mohd Nasri, and Norariza Ahmad, and Rohana Adnan, and Rahman I.Ab, (2007) Properties and morphology of bulk epoxy composites filled with modified fumed silica-epoxy nanocomposites. Journal of Applied Sciences, 7 (1). pp. 27-34. ISSN 1812-5654


Duduku Krishnaiah, and S.M. Anisuzzaman, and Awang Bono, and Rosalam Sarbatly, (2013) Adsorption of 2,4,6-trichlorophenol (TCP) onto activated carbon. Journal of King Saud University – Science, 25. pp. 251-255. ISSN 1018-3647

Daily Express, UNSPECIFIED (2020) UMS in face protector venture. Daily Express.

Dhabit Zahin, and Ahmad Nurfaidhi Rizalman, (2020) Properties of cement mortar containing NaOH-treated Crumb rubber as fine aggregate replacement. Earth and Environmental Science, 476. pp. 1-8.

Dzul Fahmi Mohd Husin Seria, (2019) Fabrication of hybrid Zno/Tips-Pentacene organic based diode using spray coating technique. Masters thesis, Universiti Malaysia Sabah.


Ervin Gubin Moung, (2013) Comparison of face recognition techniques: the effects of features and parameters setting. Masters thesis, Universiti Malaysia Sabah.


Fiqah Roslan, (2019) UMS engineering students to benefit from MoU. The Borneo Post. p. 5.


G. Balakrishnan, (2006) On real time stereo image processing and sonification methodologies applied towards SVETA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Universiti Malaysia Sabah.

Gan, Melvin Jet Hong and Ni, Qing Qing and Toshiaki Natsuki, (2016) Bending actuation and charge distribution behavior of polyurethane/carbon nanotube electroactive nanocomposites. Polymer Composites, 37 (1). pp. 262-269. ISSN 1548-0569

Gianluca Li Puma, and Duduku Krishnaiah, and Awang Bono, and Collin G. Joseph, (2008) Preparation of titanium dioxide photocatalyst loaded onto activated carbon support using chemical vapor deposition: a review paper. Journal of Hazardous Material (Elsevier BV), 157 (2-3). pp. 209-219.


Harimi Djamila, and Chu, Chi Ming and Sivakumar Kumaresan, (2013) Field study of thermal comfort in residential buildings in the equatorial hot-humid climate of Malaysia. Building and Environment, 62. pp. 133-142. ISSN 0360-1323

Ho, Koon Chang (2015) Development and characterization of a small-scale conductivity probe. Universiti Malaysia Sabah.

Haider F. Abdul Amir, and Saafie Salleh, and Abu Hassan Husin, and Fuei, Pien Chee (2016) A model for neutron radiation damage in Metal Oxide Semiconductor (MOS) structures. Key Engineering Materials, 706. pp. 51-54. ISSN 10139826

Hung, Lai Po and Rayner Alfred, and Mohd Hanafi Ahmad Hijazi, (2015) A review on feature selection methods for sentiment analysis. Advanced Science Letters, 21 (10). pp. 2952-2956. ISSN 1936-6612

Habib Musa Mohamad, and Adnan Zainorabidin, and Siti Nurul Aini Zolkefle, (2020) The Determination Of Post-Cyclic Yield’s Strength And Initial Stiffness Of Two Peat Soils. International Journal of GEOMATE, 18 (70). pp. 172-177. ISSN 2186-2982

Harimi Djamila, Exploring the variation of the desired Thermal Sensation on the Ashrae scale under Hot-Humid climatic conditions. (Unpublished)

Harimi Djamila, and Chu, Chi Ming and Sivakumar Kumaresan, (2012) A conceptual review on residential thermal comfort in the humid tropics. International Journal of Engineering Innovation & Research, 1 (3). pp. 539-544. ISSN 2277-5668

Harimi Djamila, and Mariani Rajin, and Ahmad Nurfaidhi Rizalman, (2018) Energy Efficiency through Building Envelope in Malaysia and Singapore. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 96-105. ISSN 2289-7879

Herwansyah Lago, and Ping, Jack Soh and Mohd Faizal Jamlos, and Zahriladha Zakaria, (2018) Beam‐reconfigurable crescent array antenna with AMC plane. International Journal of RF and Microwave Computer-Aided Engineering, 28 (7).


Ismail Saad, and H.M. Zuhir, and Nurmin Bolong, and Khairul Anuar Mohamad, and Bablu K. Ghosh, and Razali Ismail, (2013) Mobility enhancement on Vertical Strained-SiGe Impact Ionization MOSFET incorporating Dielectric Pocket (VESIMOS-DP). In: TENCON 2013 - 2013 IEEE Region 10 Conference (31194).

Ian Kevin Witus, and Chin Kim On, and Rayner Alfred, and Ag Asri Ag Ibrahim, and Tan Tse Guan, and Patricia Anthony, (2018) A Review of Computer Vision Methods for Fruit Recognition. Advanced Science Letters, 24 (2). pp. 1538-1542. ISSN 1936-6612

Ismail Saad, and Andee Hazwani Syazana B, and Mohd Zuhir Hamzah, and Bun Seng, C and Nurmin Bolong, (2015) Equivalent circuit model analysis of vertical impact ionization MOSFET (IMOS). In: 3rd International Conference on Artificial Intelligence, Modelling and Simulation, 2-4 December 2015, Kota Kinabalu, Malaysia.


Jedol Dayou, and M., J. Brennan (2003) Experimental verification of the optimal tuning of a tunable vibration neutralizer for global vibration control. Applied Acoustics, 64 (3). pp. 311-323. ISSN 0003-682X

Jedol Dayou, (2005) A new application of the fixed-points theory for the control of kinetic energy of a continuous structure. International Journal of Acoustics and Vibrations, 10 (4). pp. 170-174. ISSN 10275851

Jedol Dayou, and Jaehwan Kim, and Jongbeom Im, and Lindong Zhai, and Liew, Willey ,Yun Hsien and Ting , Aaron,Chuan How (2015) The effects of width reduction on the damping of a cantilever beam and its application in increasing the harvesting power of piezoelectric energy harvester. Smart Materials and Structures, 24 (4). ISSN 0964-1726

Jason Santos, (2015) Oil and gas training centre in UMS plan. Daily Express. p. 12. ISSN

Joko Sulistyo, and Toshimitsu Hata, and Masashi Fujisawa, and Kozo Hashimoto, and Yuji Imamura, and Tamami Kawasaki, (2009) Anisotropic thermal conductivity of three-layer laminated carbon-graphite composites from carbonized wood. Journal of Materials Science, 44 (3). pp. 734-744. ISSN 0022-2461

Jamal Ahmad Dargham, and Ali Chekima, and Chin , Renee,Ka Yin and Farrah Wong, (2013) A direct assessment method of the achievement of the program outcomes from the courses outcomes. In: Engineering Education (ICEED), 2013 IEEE 5th Conference , 4-5 Dec. 2013.

Janice Lynn Ayog, and Salinah Dullah, and Rosdianah Ramli , (2016) Harvested rainwater quality assessment on the effects of roof materials to the first flush runoff. Transactions on Science and Technology , 3 (1-2). pp. 271-276. ISSN 2289-8786

J. K. Ong, and Lillian Gungat, and Meor Othman Hamzah, (2020) Fracture properties of reclaimed asphalt pavement mixtures with rejuvenator. Construction and Building Materials, 259.

J.K. Ong, and Lillian Gungat, and Meor Othman Hamzah, (2020) Fracture properties of reclaimed asphalt pavement mixtures with rejuvenator. Construction and Building Materials, 259.

Janaun Jidon, and Nancy Julius Siambun, and N N Safie, (2016) Synthesis and characterization of supported sugar catalyst by dip coating method. In: IOP Conf. Series: Earth and Environmental Science.

Janifal Alipal, (2019) An image processing technique for mental health assessment from Electrophotonic. Masters thesis, Universiti Malaysia Sabah.

Jodin Makinda, and Khairul Anuar Kassim, and Kamarudin Ahmad, and Abubakar Sadiq Muhammed, and Muttaqa Uba Zango, (2020) Geochemical Evaluation of Contaminated Soil for Stabilisation Using Microbiologically Induced Calcite Precipitation Method. International Journal of Advanced Science and Technology, 29 (7). pp. 2375-2382.

John Tambanan, (2018) 25 pelajar China di UMS menerusi program pertukaran pelajar. Utusan Borneo.

John Tambanan, (2019) 49 pelajar UMS tamat modul projek syarikat minyak dan gas multinasional. Utusan Borneo. A5.

John Tambanan, (2018) Kerjasama UMS, Universiti Wuyi buahkan hasil, jalin hubungan mesra antara dua universiti. Utusan Borneo. A5.

Jumat Sulaiman, and Mohamed Othman, and Mohammad Khatim Hasan, MEGSOR iterative scheme applied to 2D steady convection-diffusion equations. Kalam, 2 (2). pp. 1-11. ISSN 1985-5222


Kang, Chiang Liew and Lian, Kim Khor (2013) Effect of different ratios of bioplastic to newspaper pulp fibres on the weight loss of bioplastic pot. Journal of King Saud University - Engineering Sciences. ISSN 0964-8305

Khabil Kiram, (2014) Dr Pogaku: Over 5,000 jobs in O&G sector when SSGP is completed in 2015. New Sabah Times. p. 5.

K A A Latiff, and Ahmad Nurfaidhi Rizalman, and N S H Harith, and S M S A Razak, and Mazizah E Mohamad, (2020) 3D Numerical modelling on the thermal performance of reinforced concrete encased wide-flanged steel column. Earth and Environmental Science, 476. pp. 1-8.

Kai, Sing Liow and Coswald Stephen Sipaut, and Mohammad Jafarzadeh, (2018) Polypyrrole- and polyaniline-surface modified nanosilica as quasi-solid state electrolyte ingredients for dye-sensitized solar cells. Journal of Materials Science: Materials in Electronics, 29 (24). pp. 21097-21108.

Khayet M, and Abu Zahrim Yaser, and N.Hilal, (2011) Modelling and optimisation of coagulation of highly concentrated industrial grade leather dye by response surface methodology. Chemical Engineering Journal, 167 (1). pp. 77-83. ISSN 13858947


Lim, Eng Har (2008) Determination of KIC fracture toughness by crack initiation of a compact tension steel specimen. Masters thesis, Universiti Malaysia Sabah.

Lim, Siew Hooi (2008) Automatic markerless pose estimation for human in short sleeve or long sleeve attire. Masters thesis, Universiti Malaysia Sabah.

Lee, Boon Beng and Chan, Eng Seng and Pogaku Ravindra, (2014) Calcium pectinate beads formation: Shape and size analysis. Journal of Engineering and Technological Sciences, 46B (1). pp. 78-92. ISSN 23375779

Lillian Gungat, and Nur Izzi Md. Yusoff, and Meor Othman Hamzah, (2016) Effects of RH-WMA additive on rheological properties of high amount reclaimed asphalt binders. Construction and Building Materials, 114. pp. 665-672. ISSN 9500618

Liew, Willey Yun Hsien and Roonie Protasius, and Ling, Jester L. J and Nancy Julius Siambun, and Noor Ajian Mohd Lair, (2016) Reciprocating wear behavior of mild steel carburized using Na₂CO₃-NaCl. Tribology International, 95. pp. 406-418. ISSN 0301-679X

Liew, Chiang Kang (2016) Mechanical properties of 3 ply plywood made from Acacia Mangium Veneers and green Starch-based Adhesives. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1-2 May 2016, Phuket, Thailand.

Lukui Jin, and Razak Mohd Ali Lee, and Ian Robertson, (2014) Analysis and design of a novel low-loss hollow substrate integrated waveguide. IEEE Transactions on Microwave Theory and Techniques, 62 (8). pp. 1616-1624. ISSN 0018-9480

Liew, Willey Yun Hsien and Lim, Yee Yan and Kwong, Kok Zee (2016) Non-destructive concrete strength evaluation using PZT based surface wave propagation technique – a comparative study. MATEC Web of Conferences, 47. 02014-p.1. ISSN 2261-236X

Lai, Po Hung and Rayner Alfred, (2017) A performance comparison of feature extraction methods for sentiment analysis. Studies in Computational Intelligence, 710. pp. 379-390. ISSN 1860-949X

Liew, Willey Yun Hsien and B.K.A. Ngoi, and Y.G. Lu, (2003) Wear characteristics of PCBN tools in ultra-precision machining of stainless steel at low cutting speeds. Wear, 254 (3-4). pp. 265-277. ISSN 0043-1648

Liew, Willey Yun Hsien and Y.G. Lu, and X. Ding, and B.K.A. Ngoi, and S. Yuan, (2004) Performance of uncoated and coated carbide tools in the ultra-precision machining of stainless steel. Tribology Letters, 17 (2). pp. 851-857. ISSN 1573-2711

Liew, Willey Yun Hsien and Yeo, Kiam Beng and Mohd Azlan Ismail, (2011) Fracture behaviour of tropical hardwood under tensile load. International Journal on Advanced Science, Engineering and Information Technology, 1 (5). pp. 560-563. ISSN 2088-5334

Lim, Jia Zheng and James Mountstephens, and Jason Teo, (2020) Comparing Eye-Tracking versus EEG Features for Four-Class Emotion Classification in VR Predictive Analytics. International Journal of Advanced Science and Technology, 29 (6). pp. 1492-1497.

Liow, Kai Sing and Coswald Stephen Sipaut @ Mohd Nasri, and Rachel Fran Mansa, and Jedol Dayou, (2014) Dye sensitized solar cell based on polyethylene glycol/4, 4-diphenylmethane diisocyanate copolymer quasi solid state electrolyte. Applied Mechanics and Materials, 625. pp. 140-143. ISSN 1660-9336


Mohd Ridzuan Ishak, (2007) Penyediaan dan pencirian bahan pateri bebas plumbum aloi Stanum-Argentum-Kuprum (Sn-Ag-Cu). Universiti Malaysia Sabah. (Unpublished)

Mei, Yeen Choong and Wei, Yeang Kow and Wei, Leong and Liau, Chung Fan and Tze, Kenneth Kin Teo (2012) An Image Segmentation using Normalised Cuts in Multistage Approach. International Journal of Simulation Systems, Science & Technology, 13 (3B). pp. 10-16. ISSN 1473-8031

Mohd Aidy Faizal Johari, (2008) Mode - I low cycle fatigue delamination of woven glass fibre reinforced polymer matrix composite. Masters thesis, Universiti Malaysia Sabah.

Muralindran Mariappan, and Manimehala Nadarajan, (2013) A labVIEW design for frontal and non- frontal human face detection system in complex background. In: 2013 2nd International Conference on Mechanical Design and Power Engineering, ICMDPE 2013, 29 November 2013 - 30 November 2013, Beijing.

Mohd Azizul Ladin, and Amsori Muhammad Das, and A. Najah, and Amiruddin Ismail, and Riza Atiq Abdullah O.K. Rahmat, (2014) A review of strategies to implement sustainable urban transportation options in Malaysia. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 85-90. ISSN 1279696

Mountstephens, James , (2014) Towards computer-generated mnemonic phrases: Experiments with genetic algorithms and N-grams. ARPN Journal of Engineering and Applied Sciences, 9 (9). pp. 1386-1393. ISSN 1819-6608

Mailin Misson, and Hu Zhang, and Bo Jin, (2015) Nanobiocatalyst advancements and bioprocessing applications. Journal of the Royal Society Interface, 12 (102). ISSN 17425689

Mohd Kamal Mohd Shah, and Perowansa Paruka, and Waluyo Adi Siswanto, and Md Abdul Maleque, (2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force. Journal of Mechanical Science and Technology, 29 (5). pp. 1941-1953. ISSN 1738-494X (Print) 1976-3824 (Online)

Mookiah Saminathan, and Sieo, Chin Chin and Han, Ming Gan and Norhani Abdullah, and Vui Ling Wong, Clemente Michael and Yin, Wan Ho (2016) Effects of condensed tannin fractions of different molecular weights on population and diversity of bovine rumen methanogenic archaea in vitro, as determined by high-throughput sequencing. Animal Feed Science and Technology, 216. pp. 146-160. ISSN 3778401

Mohd Kamel Wan Ibrahim, and R.S. Dwyer-Joyce, (2013) Data synchronization for dynamic contact measurement. In: International Tribology Conference Malaysia 2013, 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Muralindran Mariappan, and Ali Chekima, and Khoo, Brendan and Wee, Choo Chee and Wong, W.K. (2013) Co-occurrence matrix with neural network classifier for weed species classification: a comparison between direct application of co-occurrence matrix (GLCM) and haralick features as inputs. International Journal of Enhanced Research in Science Technology & Engineering, 2 (2). pp. 1-8. ISSN 2319-7463

Muralindran Mariappan, and Manimehala Nadarajan, and Karthigayan Muthukaruppan, (2013) LabVIEW based intelligent frontal & non-frontal face recognition system. International Journal of Computer Science and Electronics Engineering (IJCSEE), 1 (1). pp. 136-140. ISSN 2320–4028

Mailin Misson, and Bo, Jin and Binghui, Chen and Hu, Zhang (2015) Enhancing enzyme stability and metabolic functional ability of β-galactosidase through functionalized polymer nanofiber immobilization. Bioprocess and Biosystems Engineering, 38 (10). pp. 1915-1923. ISSN 1615-7605

Manimehala Nadarajan, (2016) Development of real-time multi pose face recognition and tracking system. Masters thesis, Universiti Malaysia Sabah.

Marcel Schweiker, and Maíra André, and Farah Al-Atrash, and HananAl-Khatri, and Rea Risky Alprianti, and Hayder Alsaad, and Rucha Amin, and Eleni Ampatzi, and Alpha Yacob Arsano, and Elie Azar, and Bahareh Bannazadeh, and Amina Batagarawa, and Susanne Becker, and Carolina Buonocore, and Bin Cao, and Joon-HoChoi, and Chungyoon Chun, and Hein Daanen, and Siti Aisyah Damiati, and Lyrian Daniel, and Renata De Vecchi, and Shivraj Dhaka, and Samuel Domínguez-Amarillo, and Edyta Dudkiewicz, and Lakshmi Prabha Edappilly, and Jesica Fernández-Agüera, and Mireille Folkerts, and Arjan Frijns, and Gabriel Gaona, and Vishal Garg, and Stephanie Gauthier, and Shahla Ghaffari Jabbari, and Harimi Djamila, and Runa T.Hellwig, and Gesche M Huebner, and Quan Jin, and Mina Jowkar, and Jungsoo Kim, and Nelson King, and Boris Kingma, and M. Donny Koerniawan, and Jakub Kolarik, and Shailendra Kumar, and Alison Kwok, and Roberto Lamberts, and Marta Laska, and M.C. Jeffrey Lee, and Yoonhee Lee, and Vanessa Lindermayr, and Mohammadbagher Mahaki, and Udochukwu Marcel-Okafor, and Laura Marín-Restrepo, and Anna Marquardsen, and Francesco Martellotta, and Jyotirmay Mathur, and Isabel Mino-Rodriguez, and Azadeh Montazami, and Di Mou, and Bassam Moujalled, and Mia Nakajima, and Edward Ng, and Marcellinus Okafor, and Mark Olweny, and Wanlu Ouyang, and Ana Lígia Papst de Abreu, and Alexis Pérez-Fargallo, and Indrika Rajapaksha, and Greici Ramos, and Saif Rashid, and Christoph F.Reinhart, and Ma. Isabel Rivera, and Mazyar Salmanzadeh, and Karin Schakib-Ekbatan, and Stefano Schiavon, and Salman Shooshtarian, and Masanori Shukuya, and Veronica Soebarto, and Suhendri Suhendri, and Mohammad Tahsildoost, and FedericoTartarini, and Despoina Teli, and Priyam Tewari, and Samar Thapa, and Maureen Trebilcock, and Jörg Trojan, and Ruqayyatu B.Tukur, and Conrad Voelker, and Yeung Yam, and Liu Yang, and Gabriela Zapata-Lancaster, and Yongchao Zhai, and Yingxin Zhu, and ZahraSadat Zomorodian, (2020) Evaluating assumptions of scales for subjective assessment of thermal environments – Do laypersons perceive them the way, we researchers believe? Energy & Buildings, 211. ISSN 0378-7788

Mariani Rajin, and A H Kamaruddin, (2016) Effect of temperature on Candida antartica lipase B activity in the kinetic resolution of acebutolol. IOP Conference Series: Earth and Environmental Science, 36 (1). pp. 12-61.

Mariani Rajin, and Asiah Zulkifli, and Sariah Abang, and S.M Anissuzzaman, and Azlina Harun Kamaruddin, (2020) Effect of Reaction Parameters on the Lipase-Catalyzed Kinetic Resolution of (RS)-Metoprolol. AJChE, 20 (1). pp. 20-30.

Milad Abaspoor, and Saeed Meshgini, and Tohid Yousefi Rezaii, and Ali Farzamnia, (2020) A Novel Method for Detecting Breast Cancer Location Based on Growing GA-FCM Approach. IEEE.

Mohamad Nasir Mohamad Ibrahim, and Mohamed Rashid Ahmed-Haras, and Coswald Stephen Sipaut @ Mohd Nasri, and Hassan Y. Aboul-Enein, and Abdullahi Ali Mohamed, (2010) Preparation and characterization of a newly water soluble lignin graft copolymer from oil palm lignocellulosic waste. Carbohydrate Polymers, 80 (4). pp. 1102-1110. ISSN 0144-8617

Mohammad Jafarzadeh, and Ismail Ab Rahman, and Coswald Stephen Sipaut @ Mohd Nasri, (2012) Synthesis of silica polypyrrole core shell nanocomposite using in situ γ-aminopropyltriethoxysilane (APTES)-modified nanosilica. Synthetic Metals, 162 (5-6). pp. 466-476. ISSN 0379-6779

Mohd Suffian Misaran, and Rosalam Sarbatly, and Awang Bono, and M.M. Rahman, (2016) Effect of extrusion rate on morphology of Kaolin / Poly Ether Sulfone (PESf) membrane precursor. In: International Engineering Research and Innovation Symposium (IRIS), 24 - 25 November 2016, Kings Green Hotel Melaka, Malaysia.

Mohd Suffian Misaran, and Rossalam Sarbatly, and Md Mizanur Rahman, (2014) Rheological properties of kaolin/PolyetherSulfone (PESf) used in hollow fiber fabrication: Effects of content ratio. Applied Mechanics and Materials, 660. pp. 244-248. ISSN 16609336

Muhammad Iqbal Hashmi, (2002) Distribution of metals in fruits, vegetables and shellfish of Sabah. Post-Doctoral thesis, Universiti Malaysia Sabah.

Mun, Ki Bae and Ho, Gi Lim and Yeong, Min Park and Seock, Sam Kim and Tae, Gyu Kim (2020) Tribological characteristics of high strength low alloy steel under various environmental conditions. Modern Physics Letters B, 34 (7).


Nagarajan, R. and Sainarayanan , Gopala and Sazali Yaacob, and Porle, Rosalyn R. (2004) An improved object identification for NAVI. In: : IEEE Region 10 Conference on Analog and Digital Techniques in Electrical Engineering, 21-24 November 2004 , Chiang Mai, Thailand.

Noraini Abdullah, and Zainodin Hj. Jubok, and Amran Ahmed, (2012) Comparisons between Huber’s and Newton’s Multiple Regression Models for Stem Biomass Estimation. Malaysian Journal of Mathematical Sciences, 6 (1). pp. 1-28. ISSN 1823-8343

Neo, Pei Yin (2006) Survival and recul turability of probiotic cells during freeze drying. Universiti Malaysia Sabah. (Unpublished)

Ng, Chee Hiong (2010) Studies on precast reinforced concrete floor panels using oil palm shell aggregate. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Universiti Malaysia Sabah.

Nazera M. Ismail, and Ahmad Fauzi Ismail, and Azizul Azri Mustaffa, (2014) Characterization of polyethersulfone/cloisite 15A mixed matrix membrane for CO2/CH4 separation. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 9-83. ISSN 1279696

Nader Nassif Barsoum, and Pandian Vasant, and Arijit Bhattacharya, and Cvetko Andreeski, and T. Kolemisevska, and A.T. Dinibütün, (2006) Decision making in Toc-Product-Mix selection VIA fuzzy cost function optimization. In: IFAC Conference on Supplemental Ways for Improving International Stability Through Automation – ISA ’06, 15–17 June 2006, Prishtina.

Nader Nassif Barsoum, and Pandian Vasant, (2007) Balancing cost, operation and performance in integrated Hydrogen Hybrid Energy System. In: First Asia International Conference on Modelling and Simulation (AMS 2007), 27-30 March 2007, Phuket, Thailand.

Nader Nassif Barsoum, (2012) Performance of direct torque control implemented in speed drive. Global Journal of Technology & Optimization (GJTO), 3. ISSN 2229-8711

Nurmin Bolong, and Ismail Saad, and Khairul Anuar Mohamad, and Bablu K. Ghosh, and H.M. Zuhir, and C Bun Seng, and Razali Ismail, and U. Hashim, (2013) Performance analysis of single and dual channel vertical strained SiGe impact ionization MOSFET (VESIMOS). In: Micro and Nanoelectronics (RSM), 2013 IEEE Regional Symposium.

Nur Indang Marzuki, and Fatimah Abu Bakar, and Abu Bakar Salleh, and Lee, Yook Heng and Nor Azah Yusof, and Shafiquzzaman Siddiquee, (2012) Development of electrochemical biosensor for formaldehyde determination based on immobilized enzyme. International Journal of Electrochemical Science, 7 (7). pp. 6070-6081. ISSN 1452-3981

Nelly Majain, (2016) Evaluation of strength characteristics of mortar and concrete during curing using EMI and surface wave propagation techniques. Masters thesis, Universiti Malaysia Sabah.

Ngu War Hlaing, and Ali Farzamnia, and Muralindran Mariappan, and Manas Kumar Haldar, (2020) Network coding schemes with efficient LDPC coded MIMO–NOMA in two-way relay networks. IET Communications, 14 (2). pp. 337-348.

Nooralisa Mohd Tuah, and Nuraini Jamil, and Dg. Senandong Ajor, (2009) Retrieval based on skin color to detect the malicious images. (Unpublished)

Nor Syahida Mohamad, (2019) Penyelesaian kolokasi cebis demi cebis dengan skema kuadratur peringkat tinggi ke atas persamaan Kamiran Fredholm jenis II menerusi Famili Lelaran Sapuan Suku. Masters thesis, Universiti Malaysia Sabah.

Norfarariyanti Parimon, and M. H. Mamat, and I. B. Shameem Banu, and N. Vasimalai, and M. K. Ahmad, and A. B. Surian, and A. Mohamed, and M. Rusop, (2020) Fabrication, structural, optical, electrical, and humidity sensing characteristics of hierarchical NiO nanosheet/nanoball fower like structure flms. Journal of Materials Science: Materials in Electronics, 31. pp. 11673-11687.

Nurliyana Nasuha Safie, and Abu Zahrim Yaser, and Nidal Hilal, (2020) Ammonium ion removal using activated zeolite and chitosan. Asia-Pacific Journal of Chemical Engineering, 15 (3).

Nurulashikin Bahaman, and Sk Muiz Sk Abdul Razak, and Azlan Adnan, and Norrazman Zaiha Zainol, and Norhaizura Yahya, and Khairunnisa Muhamad, and Ahmad Nurfaidhi Rizalman, and Mazizah Ezdiani Mohamad, and Nur Adibah Ayuni Abd Malek, (2018) One-way transnational magnetic mass damper model for structural response control against dynamic loadings. MATEC Web of Conferences, 195. pp. 1-8.


Olarewaju, Akinola J., and Rao, Nittala Surya Venkata Kameswara and Md. Abdul Mannan, (2010) Guidelines for the design of buried pipes to resist effects of internal explosion, open trench and underground blasts. Electronic Journal of Geotechnical Engineering, 15J. pp. 1-13. ISSN 1089-3032

Olarewaju, Akinola Johnson and Kamaeswara Rao, N. S. V. and Md. Abdul Mannan, (2011) Dimensionless response of underground pipes due to blast loads using finite element method. Electronic Journal of Geotechnical Engineering, 16. pp. 563-574. ISSN 1089-3032


Pogaku Ravindra, and Rahmath Abdulla, (2013) Characterization of cross linked Burkholderia cepacia lipase in alginate and κ-carrageenan hybrid matrix. Journal of the Taiwan Institute of Chemical Engineers. ISSN 1876-1070

Pogaku Ravindra, and Gim, Pao Lim and Hui, Yen Ong and Boon, Beng Lee and Muhammad Syarhabil Ahmad, and Harbant Singh, (2014) Effects of process variables on size of Chitosan-alginate capsules through extrusion-dripping method. Advanced Materials Research, 925. pp. 8-12. ISSN 10226680

Paramasivam Suresh Kumar, (2006) A study on high performance concrete using sandstone aggregates. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Universiti Malaysia Sabah.

Perowansa Paruka, and Md Hafizil Mat Yasin, and Rizalman Mamat, and Md Abdul Malequeand Md, and Md Kamal Md Shah, (2015) Crush zone morphology of epoxy glass fiber aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research, 1115. pp. 258-261. ISSN 10226680

P Vejayakumaran, and Ismail Ab Rahman, and Coswald Stephen Sipaut @ Mohd Nasri, and C. K. J. Chee, (2008) Structural and thermal characterizations of silica nanoparticles grafted with pendant maleimide and epoxide groups. Journal of Colloid and Interface Science, 328 (1). pp. 81-91. ISSN 0021-9797

Perowansa Paruka, and Mohd Kamal Mohd Shah, and Md Abdul Mannan, (2013) Influence of Axial and Oblique Impact Loads on Crush Response Properties of Square Tube Structures Made with FRP Pultruded Composites. Procedia Engineering, 68. pp. 572-578. ISSN 1877-7058


Qishin Tariq, UNSPECIFIED (2020) Covid-19: Volunteers coming together across Malaysia to produce PPE for frontliners. The Star. pp. 1-2.


Rosalam Sarbatly, and Chiam, Chel Ken (2013) Evaluation of geothermal energy in desalination by vacuum membrane distillation. Applied Energy.

Rosalyn R Porle, (2011) Two dimensional upper Human Body Pose Modelling system. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, University Malaysia Sabah.

Rosalam Sarbatly , and Duduku Krishnaiah, and Richard England, and Sariah Abang, and Jeanette Jeffery, (2007) Comparison studies of appliedpressure and concentration gradient driving forces in ceramic Nano Filtration Membrane for the production of intravenous salt solution. Journal of Applied Sciences, 7 (15). pp. 2069-2075. ISSN 1812-5654

Rachel Fran Mansa, and Coswald Stephen Sipaut @ Mohd Nasri, and Suhaimi Md Yasir, and Jedol Dayou, and Costantine Joannes, (2018) A Feasibility Study Using Electrolysis Treatment (ET) As the Pre-treatment Method to Extract Lipid from Chlorella sp. for Biodiesel Production. Pertanika J. Sci. & Technol, 26 (4). pp. 1693-1712. ISSN 0128-7680

Rodeano Roslee, (2018) Geohazards In Sandakan Town Area, Sabah, Malaysia. Geological Behavior (GBR), 2 (1). pp. 18-23. ISSN 2521-0890

Rohaya Alias, and Siti Jahara Matlan, and Anuar Kasa, (2020) Finite element performance with different mesh size of retaining walls. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (3). pp. 381-389. ISSN 0976-6480

Roonie Protasius, (2016) Effect of carburisation process on the wear of steel. Masters thesis, Universiti Malaysia Sabah.

Rosalam Sarbatly, and Zykamilia Kamin, (2013) The effects of kaolin/PESF ratios on the microstructures of kaolin hollow tubes. Developments in Sustainable Chemical and Bioprocess Technology. pp. 381-387. ISSN 978-1-4614-6207-1

Rosdianah Ramli, and Nurmin Bolong, (2016) Effects of pressure and temperature on ultrafiltration hollow fiber membrane in mobile water treatment system. Journal of Engineering Science and Technology, 11 (7). pp. 1031-1040. ISSN 1823-4690


Saafie Salleh, and Harvey, N. Rutt and Mohd Noh Dalimin, and Muhamammad Mat Salleh, (2011) Cold deposition of zinc sulfide optical waveguides using thermoelectric device. Advanced Materials Research, 264-26. pp. 856-861. ISSN 1022-6680

Siew, Zhan Wei and Wong, Chen How. and Aroland M'conie Jilui Kiring, and Chin, Renee Ka Yin and Teo, Kenneth Tze Kin (2012) Fuzzy logic based energy efficient protocol in wireless sensor networks. ICTACT Journal on Communication Technology (IJCT), 3 (4). pp. 639-645. ISSN 2229-6948

Shee, Eng Tan and Zhan, Wei Siew and Khairul Anuar Mohamad, and Ismail Saad, and Teo, Kenneth Tze Kin (2012) Network Coding Based Packets Queue Operation for Wireless Ad Hoc Networks. International Journal of Simulation: Systems, Science and Technology, 13 (3B). pp. 23-29. ISSN 1473-8031

Soheila Farajia, and Afidah Abdul Rahima, and Norita Mohameda, and Coswald Stephen Sipautb, and Bothi Rajaa, (2013) Corrosion resistance of electroless Cu–P and Cu–P–SiC composite coatings in 3.5% NaCl. Arabian Journal of Chemistry, 6. pp. 379-388. ISSN 1878-5352

Suhaila Sahabuddin, (2005) Penukar karat berasaskan asid tanik dan asid fosforik. Universiti Malaysia Sabah. (Unpublished)

Sitti Nor Azizah Talata, (2014) Talisman taja 30 pelajar ikuti pengajian minyak dan gas. Utusan Malaysia. p. 30.

Shim, Lawrence Szu Lin (2007) Properties of concrete using hybrid fibers. University Malaysia Sabah. (Unpublished)

Siti Jahara Matlan, and Muhammad Mukhlisin, and Mohd Raihan Taha, (2014) Performance evaluation of four-parameter models of the soil-water characteristic curve. Scientific World Journal, 2014. ISSN 1537744X

Shaban Ismael Albrka, and Amiruddin Ismail, and Mohd Azizul Ladin, and Hussin A.M Yahia, (2014) Application of transyt-7f on signalized road junction networks in Shah Alam and Petaling Jaya. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 59-64. ISSN 1279696

Sulaiman H.A.B., and Othman M.A., and Aziz M.Z.A.A., and Abdullah Bade, (2015) Review on narrow phase collision detection system in virtual environment. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 691-700. ISSN 1819-6608

Sebastian Dayou, (2013) Friction and wear behaviour of aluminium chromium nitride coating and palm oil methyl ester lubrication. Masters thesis, Universiti Malaysia Sabah.

Sazali Yaacob, (2004) Prinsip kejuruteraan kawalan. Penerbit Universiti Malaysia Sabah, Universiti Malaysia Sabah.

Siow, Hwa Teo and Aminul Islam, and Yun Hin Taufiq-Yap, (2016) Algae derived biodiesel using nanocatalytic transesterification process. Chemical Engineering Research and Design, 111. pp. 362-370. ISSN 2638762

S. M. Anisuzzaman, and Duduku Krishnaiah, and Awang Bono, and S Abang, and M Sundang, and Emma Suali, and Farhana Abd Lahin, and A Shaik Alawodeen, (2016) Synthesis and characterization of metal oxide promoted alumina catalyst for biofuel production. In: IOP Conference Series: Earth and Environmental Science.

S.K. Ghoshal, and Asmahani Awang, and M.R. Sahar, and R. Arifin, (2016) Gold nanoparticles stimulated surface plasmon resonance effects in erbium-zinc-sodium-tellurite glass. Materials Science Forum, 846. pp. 52-57. ISSN 1662-9752

S.M. Anisuzzaman, and Duduku Krishnaiah, and Awang Bono, and Farhana Abd Lahin, and R.I. Syazryn, (2018) Simulation of fermentation compounds for bioethanol production using different separating agents. Pertanika Journal of Science and Technology, 26 (3). pp. 1111-1130.

Samsul Ariffin Abdul Karim, and Muhammad Izzatullah Mohd Mustafa, and Bakri Abdul Karim, and Mohammad Khatim Hasan, and Jumat Sulaiman, and Mohd Tahir Ismail, (2013) Image reconstruction using singular value decomposition. AIP Conference Proceedings, 152 (1). pp. 269-274. ISSN 0094-243X

Sariah Saalah, and Luqman Chuah Abdullah, and Min Min Aung, and Mek Zah Salleh, and Dayang Radiah Awang Biak, and Mahiran F. Basri, and Emiliana Rose Jusoh, and Suhaini Mamat, (2018) Colloidal stability and rheology of jatropha oil-based waterborne polyurethane (JPU) dispersion. Progress In Organic Coating, 125. pp. 348-357.

Saturi Baco, (2015) Study On electrical and structure properties of Metakaolin Geopolymer/Carbon Nanofibers (CNFs) Nanocomposite. (Unpublished)

Sharmeena Naido, and Rosalyn R. Porle, (2018) Survey on face detection methods. International Research Journal of Engineering and Technology (IRJET), 5 (11). pp. 1467-1470. ISSN 2395-0056

Siti Aisyah Narudin, (2019) Tingkat kebolehpasaran bidang kejuruteraan : UMS, HSS Engineers Berhad meterai kerjasama. Utusan Borneo. B3.

Suzelawati Zenian, and Tahir Ahmad, and Amidora Idris, (2018) Fuzzy Inference System for Edge Detection in Flat Electroencephalography Image. ASM Sc. J, 11 (3). pp. 147-152.

Swapan Ghosh, and Bablu K. Ghosh, (2020) Fossil Fuel Consumption Trend and Global Warming Scenario: Energy Overview. Global Journal of Engineering Sciences, 5 (2). pp. 1-5. ISSN 2641-2039

Sylvester Kenneth Sedah, and Ana Sakura Zainal Abidin, and A. Rigit, and Mohd Azlan Ismail, and Raudhah Ahmadi, and Md Abdul Mannan, (2017) Development of wind tunnel for ultrafine palm oil fuel ash separator. In: The 9th International Unimas Stem Engineering Conference (ENCON 2016), 26 - 28 October 2016, Kuching, Sarawak.


Tan, Chee Leong (2007) Simulation of semiconductor laser using circuit level modeling. Masters thesis, Universiti Malaysia Sabah.

Tu, Frances Juan Yu (2008) Numerical and statistical analysis of energy content of Shell-Fibre-EFB mixture 2. Universiti Malaysia Sabah. (Unpublished)

Teo , Delsye Ching Lee (2007) A study on structural lightweight concrete using Oil Palm Shell (OPS) aggregate. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Universiti Malaysia Sabah.

Tze, Kenneth, Kin Teo and Ka, Renee,Yin Chin and Nittala Surya Venkata Kameswara Rao, (2016) Vehicle tracking using particle filter for parking management System. In: Artificial Intelligence with Applications in Engineering and Technology (ICAIET), 2014 4th International Conference, 3-5 Dec. 2014.

Teo, Jason Tze Wi and Asni Tahir, and Norhayati Daut, and Nordaliela Mohd Rusli, and Norazlina Khamis, (2016) Fixed vs. self-adaptive crossover first differential evolution. Applied Mathematical Sciences, 10 (32). pp. 1603-1610. ISSN 1312-885X

Tang, Zi Sheng and Nurmin Bolong, and Ismail Saad, and Rosdianah Ramli, and Tiam, Franklin Yang Lim (2016) Effect of polyvinylpyrrolidone and fabrication parameters on electrospun titanium oxide nanofibres’ diameter. Jurnal Teknologi (Sciences and Engineering), 78 (12). pp. 19-24. ISSN 2180-3722

Tay, Lee Yong and Harimi Djamila, (2018) Review on Koppen-Geiger System for Indoor Thermal Comfort. International Journal of Engineering Innovation & Research, 7 (4). pp. 220-225. ISSN 2277-5668

Teh, Michael (2018) Eight UMS engineering students enrolled in Wuyi University after LOI signing. New Sabah Times. p. 7.

Teh, Michael (2018) Wuyi University engineering students at UMS for courses. New Sabah Times. p. 5.

Teo, Kenneth Tze Kin and Yew, Hoe Tung and Lye, Scott Carr Ken and Lim, Kit Guan and Ang, Soo Siang and Khairul Anuar Mohamad, and Ali Chekima, and Liau, Chung Fan and Aroland Jilui Kiring, (2012) An extended adaptive mechanism of evolutionary based channel assignment via reinforcement. (Unpublished)

Tse, Guan Tan and Jason Teo, and Kim, On Chin and Patricia Anthony, (2013) Pareto Ensembles for evolutionary Synthesis of Neurocontrollers in a 2D Maze-based video game. Applied Mechanics and Materials. pp. 3173-3177. ISSN 1662-7482


UNSPECIFIED, (2015) UMS committed towards supporting 0&G agenda. Daily Express. p. 11. ISSN

Utusan Borneo, (2018) Ceramah Kerjaya FKJ sokong usaha tingkat kebolehpasaran graduan. Utusan Borneo. B3.


Wai , Heng Choong and Kiam , Beng Yeo and Fadzlita Tamiri , and Tze , Kenneth,Kin Te (2013) Outboard Marine Propeller Performance Analysis Through CFD Modelling. 2013 UKSim 15th International Conference on Computer Modelling and Simulation.

Willey Liew, and Jester Ling Lih Jie, and Yee Yan Lim, and Jedol Dayou, (2013) Frictional and wear behaviour of AlCrN, TiN, TiAlN single-layer coatings, and TiAlN/AlCrN, AlN/TiN nano-multilayer coatings in dry sliding. Procedia Engineering, 68. pp. 512-517.


Yeo, Kiam Beng and Mohd Noh Dalimin, and Mohd Aidy Faizal Johari, (2007) Mode-I Toughness and Curing Pressure Characteristic of Symmetrical Lay-Up of Plain-Weave Woven GFRP Composites. Journal of Applied Sciences, 7 (15). pp. 2174-2182. ISSN 1812-5654

Yew, Hoe Tung and Supriyanto Eko, and Satria M. H., and Hau, Yuanwen (2016) Adaptive network selection mechanism for telecardiology system in developing countries. In: 3rd IEEE EMBS International Conference on Biomedical and Health Informatics, BHI 2016, 24 February 2016 through 27 February 2016, Las Vegas, United States.

Yap, Siong Han UMS rangkul empat emas, dua perak. Utusan Borneo. B2.

Yee, Yan Lim and Kok, Zee Kwong and Yun, Willey Hsien Liew and Chee, Kiong Siew (2016) Non-destructive concrete strength evaluation using smart piezoelectric transducer - a comparative study, smart materials and structures. Smart Materials and Structures, 25 (8). ISSN 0964-1726

Yeo Kiam Beng @ Abdul Noor, and Mohd Noh Dalimin, and Muaz Abdul Wahab, and Hu Lai, (2018) Plastic collapse and energy absorption of empty circular aluminum tube under transverse quasi-static loading. Journal of Mechanical Science and Technology, 32 (8). pp. 3611-3613.

Yew, Hoe Tung and Yudha Aditya, and Noraini Jalil, and Hau, Yuan wen and Eko Supriyanto, (2015) Portable teleprenatology system for midwives in rural areas. ARPN Journal of Engineering and Applied Sciences, 10 (3). pp. 1114-1122. ISSN 1819-6608

Yew, Lek Chong and Ka, Renee,Yin Chin (2020) A Study of the Effect of Electrode Dimensions on Scaling Up ERT Applications. IEEE.


Z. A. Ghani, and E. Onn, and M. Y. Zeain, and Apriana Toding, and F. A. Azidin, and H. Othman, and Z. Zakaria, and Herwnsyah bin Lago, (2020) Peripheral interface controller-based maximum power point tracking algorithm for photovoltaic DC to DC boost controller. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18 (1). pp. 240-250. ISSN 1693-6930

Zhipeng Wang, and Yipei Lia, and Jian Liu, and Tian Gui, and Hironori Ogata, and Wei Gong, and Adavan Kiliyankil Vipin, and Yanqing Wang, and Gan, Melvin Jet Hong and Josue Ortiz-Medina, and Shuwen Wang, and Rodolfo Cruz-Silva, and Shingo Morimoto, and Yoshio Hashimoto, and Bunshi Fugetsu, and Ichiro Sakata, and Mauricio Terrones, and Morinobu Endo, (2020) Facile synthesis of graphene sheets intercalated by carbon spheres for high-performance supercapacitor electrodes. Carbon, 167. pp. 11-18.

This list was generated on Tue Sep 29 04:19:05 2020 MYT.