Items where Author is "Liew, Willey Yun Hsien"

Article

Wong, Karen Min Jin and Zhipeng Wang and Liew, Willey Yun Hsien and Gan, Melvin Jet Hong (2023) Low-Cost and Sustainable Carbonized Sawdust Based Solar Absorber for Solar Vapor Generation Towards Seawater Desalination. Waste and Biomass Valorization. p. 1. ISSN 1877-2641

Naveed Hassan and Manickam Minakshi and Liew, Willey Yun Hsien and Amun Amri and Jiang, Zhong-Tao (2023) Thermal Characterization of Binary Calcium-Lithium Chloride Salts for Thermal Energy Storage at High Temperature. Energies, 16. pp. 1-16.

Liew, Willey Yun Hsien and Hooi, Peng Lim and Gan, Melvin Jet Hong and Jedol Dayou and Jiang, Zhong-Tao (2022) Thermal stability, mechanical properties, and tribological performance of TiAlXN coatings: Understanding the effects of alloying additions. Journal of Materials Research and Technology, 17. pp. 961-1012. ISSN 2238-7854

Wong, Min Jin Karen and J.H. Wong and Zhipeng Wang and Nancy Julius Siambun and Liew, Willey Yun Hsien and Wan Khairul Muzammil Bin Abd Rahim and K. Sopian and Gan, Melvin Jet Hong (2021) Facile mild hydrothermal treatment for surface functionalization of carbonized sawdust. Materials Chemistry and Physics, 263 (1). pp. 1-8. ISSN 0254-0584

Ehsan Mohammadpour and Liew, Willey Yun Hsien and Nik Radevski and Sunghwan Lee and Nicholas Mondinos and Mohammednoor Altarawneh and Manickam Minakshi and Amun Amri and Matthew R. Rowles and Lim, Hong Ngee and Jiang, Zhong-Tao (2021) High temperature (up to 1200 ℃) thermal mechanical stability of Si and Ni doped CrN framework coatings. Journal of Materials Research and Technology, 14. pp. 2406-2419. ISSN 2238-7854

Hooi, Peng Lim and Liew, Willey Yun Hsien and Gan, Melvin Jet Hong and Zhong-Tao Jiang (2021) A short review on the phase structures, oxidation kinetics, and mechanical properties of complex Ti-Al alloys. Material, 14 (7). pp. 1-24. ISSN 1996-1944

Wong, Karen Min Jin and Miron Gakim and Jidon Adrian Janaun and Liew, Willey Yun Hsien and Nancy Julius Siambun (2018) Effect of temperature and voltage on the preparation of solid carbon by electrolysis of a molten CaCO3-Li2CO3-LiCl electrolyte. International Journal of Electrochemical Science, 3. pp. 9771-9783. ISSN 1452-3981

Noor Ajian Mohd Lair and Chuan, Kian Pang and Liew, Willey Yun Hsien and Hardy Semui and Loh, Zhia Yew (2013) An EOQ based multi-storage location of spare part inventories: a case study. Applied Mechanics and Materials, 315. pp. 733-738. ISSN 1660-9336

Wong, Tee Hou and Ngu, M.C.D and Chang, Jackson Hian Wui and Jedol Dayou and Liew, Willey Yun Hsien (2013) Analysis of vibrator for sompoton using cantilever beam model. Borneo Science, 32. pp. 14-22. ISSN 1394-4339

Liew, Willey Yun Hsien and Sebastian Dayou and Mohd Azlan Ismail and Nancy Julius Siambun and Jedol Dayou (2012) Dry sliding behaviour of AlCRN and TiN coatings. Advanced Materials Research, 576. pp. 559-564. ISSN 1022-6680

Jedol Dayou and Chow, Man Sang and Liew, Willey Yun Hsien (2011) Harvesting electrical charge from ambient vibration using piezoelectric materials. Borneo Science, 29. pp. 23-31. ISSN 1394-4339

Liew, Willey Yun Hsien and Yeo, Kiam Beng and Mohd Azlan Ismail (2011) Fracture behaviour of tropical hardwood under tensile load. International Journal on Advanced Science, Engineering and Information Technology, 1 (5). pp. 560-563. ISSN 2088-5334

Liew, Willey Yun Hsien (2009) Ultra-precision machining of stainless steel using coated carbide tool. Tribology Transactions, 31 (2). pp. 117-120. ISSN 1040-2004

Liew, Willey Yun Hsien and Yuan, Shihao and Ngoi, B. K. A (2004) Evaluation of machining performance of STAVAX with PCBN tools. The International Journal of Advanced Manufacturing Technology, 23 (1-2). pp. 11-19. ISSN 1433-3015

Liew, Willey Yun Hsien and Y.G. Lu and X. Ding and B.K.A. Ngoi and S. Yuan (2004) Performance of uncoated and coated carbide tools in the ultra-precision machining of stainless steel. Tribology Letters, 17 (2). pp. 851-857. ISSN 1573-2711

Liew, Willey Yun Hsien (2004) The effect of air in the machining of aluminium alloy. Tribology Letters, 17 (1). pp. 41-49. ISSN 1573-2711

Liew, Willey Yun Hsien and B.K.A. Ngoi and Y.G. Lu (2003) Wear characteristics of PCBN tools in ultra-precision machining of stainless steel at low cutting speeds. Wear, 254 (3-4). pp. 265-277. ISSN 0043-1648

X. Ding and Liew, Willey Yun Hsien and B.K.A. Ngoi and J.G.K. Gan and S.H. Yeo (2002) Wear of CBN tools in ultra-precision machining of STAVAX. Tribology Letters, Springer, 12 (1). pp. 3-12.

Liew, Willey Yun Hsien and I. M. Hutchings and J.A Williams (1998) Friction and lubrication effects in the machining of aluminium alloys. Tribology Letters, 5 (1). pp. 117-122. ISSN 1573-2711

Liew, Willey Yun Hsien (2010) Low-speed milling of stainless steel with TiAlN single-layer and TiAlN/AlCrN nano-multilayer coated carbide tools under different lubrication conditions. Wear, 269 (7-8). pp. 617-631. ISSN 0043-1648

Liew, Willey Yun Hsien (2009) Experimental study on the performance of coated carbide tools in the ultra-precision machining of stainless steel. Tribology Transactions, 52 (3). pp. 293-302. ISSN 1040-2004

Liew, Willey Yun Hsien and XiaoMing, M. Ding (2008) Wear progression of carbide tool in low-speed end milling of stainless steel. Wear, 265 (1-2). pp. 155-166. ISSN 0043-1648

Liew, Willey Yun Hsien (2006) Effect of relative humidity on the unlubricated wear of metals. Wear, 260 (7-8). pp. 720-727. ISSN 0043-1648

X., Ding and Liew, Willey Yun Hsien and X., D. Liu (2005) Evaluation of machining performance of MMC with PCBN and PCD tools. Wear, 259 (2). pp. 1225-1234. ISSN 0043-1648

S. Dayou and Liew, Willey Yun Hsien and Mohd Azlan Ismail and Jedol Dayou (2011) Evaluation of palm oil methyl ester as lubricant additive using milling and four-ball tests. International Journal of Mechanical and Materials Engineering, 6 (3). pp. 374-379. ISSN 1823-0334

Law, Leh Sung and Kim, Jong Hyun and Liew, Willey Yun Hsien and Lee, Sun Kyu (2012) An approach based on wavelet packet decomposition and HilbertHuang transform (WPDHHT) for spindle bearings condition monitoring. Mechanical Systems and Signal Processing, 33. pp. 197-211. ISSN 0888-3270

Jedol Dayou and Liew, Willey Yun Hsien and Chow, Man Sang (2012) Increasing the bandwidth of the width-split piezoelectric energy harvester. Microelectronics Journal, 43 (7). pp. 484-491. ISSN 0026-2692

Liew, Willey Yun Hsien and Roonie Protasius and Ling, Jester L. J and Nancy Julius Siambun and Noor Ajian Mohd Lair (2016) Reciprocating wear behavior of mild steel carburized using Na₂CO₃-NaCl. Tribology International, 95. pp. 406-418. ISSN 0301-679X

Liew, Willey Yun Hsien and Chee, Kiong Soh and Yee, Yan Lim and Kok, Zee Kwong (2016) Non-destructive concrete strength evaluation using smart piezoelectric transducer—a comparative study. Smart Materials and Structures, 25 (8). ISSN 1361-665X

Liew, Willey Yun Hsien and Law, Leh-Sung and Kim, Jong Hyun and Lee, Sun-Kyu (2012) An approach based on wavelet packet decomposition and Hilbert-Huang transform (WPD-HHT) for spindle bearings condition monitoring. Mechanical Systems and Signal Processing, 33. pp. 197-211. ISSN 0888-3270

Omid Nabinejad and Liew, Willey Yun Hsien and D. Sujan and Ian J. Davies and M. E. Rahman (2016) Mechanical and thermal characterization of polyester composite containing treated wood flour from Palm oil biomass. Polymer Composites Early View (Online Version of Record published before inclusion in an issue). ISSN 1548-0569

Liew, Willey Yun Hsien and Lim, Yee Yan and Kwong, Kok Zee (2016) Non-destructive concrete strength evaluation using PZT based surface wave propagation technique – a comparative study. MATEC Web of Conferences, 47. 02014-p.1. ISSN 2261-236X

Conference or Workshop Item

S C On and S A Bahrin and M Gakim and Liew, Willey Yun Hsien and Fadzlita Mohd Tamiri and Nancy Julius Siambun (2022) A review on the development of electro-carburisation process. In: Material and Energy Engineering for Sustainable Advancement (MEESA 2021), 29-30 September 2021, Kota Kinabalu, Sabah, Malaysia.

K Marcellus and Jidon @ Adrian Janaun and Nancy Julius Siambun and Liew, Willey Yun Hsien (2019) Structural Analysis of Laterally Aerated Moving Bed (LAMB) Dryer by using Robot Structural Analysis (RSA) Professional 2018. In: International Conference on Mechanical Engineering, Energy and Advanced Materials, 29 – 30 November 2018, Kota Kinabalu, Sabah, Malaysia.

Liew, Willey Yun Hsien (2009) Wear of TiAlN and TiAlN/AlCrN coated tools in low-speed end milling of stainless steel. In: World Tribology Congress 2009, 6-11 September 2009, Kyoto, Japan.

Liew , Willey Yun Hsien and Y. , G. Lu and X. , Ding and B. , K. A. Ngoi and S. , Yuan (2004) Performance of uncoated and coated carbide tools in the ultra-precision machining of stainless steel. In: Conference Smart Surfaces in Tribology, 10-12 September 2003 , Zurich, Switzerland.

Liew , Willey Yun Hsien and Ding, Xing Zhao (2005) Wear of coated carbide tools in the ultra-precision machining of stainless steel. In: 2005 World Tribology Congress III., 12-16 September 2005, Washington, D.C..

Noor Ajian Mohd Lair and Lee, Jason Fook Min and Liew , Willey Yun Hsien and Rosalam Sarbatly (2012) Simulation based process improvement in palm oil industry : A case study at palm kernel department. In: 2012 IEEE Business, Engineering and IndustrialApplications Colloquium, BEIAC 2012, 7-8 April 2012, Kuala Lumpur.