Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"
Up a level |
- Library of Congress Subject Areas (542)
- T Technology (542)
- TA Engineering (General). Civil engineering (General) (542)
- T Technology (542)
Academic Exercise
Mohd Ridzuan Ishak (2007) Penyediaan dan pencirian bahan pateri bebas plumbum aloi Stanum-Argentum-Kuprum (Sn-Ag-Cu). Universiti Malaysia Sabah. (Unpublished)
Suhaila Sahabuddin (2005) Penukar karat berasaskan asid tanik dan asid fosforik. Universiti Malaysia Sabah. (Unpublished)
Neo, Pei Yin (2006) Survival and recul turability of probiotic cells during freeze drying. Universiti Malaysia Sabah. (Unpublished)
Shim, Lawrence Szu Lin (2007) Properties of concrete using hybrid fibers. University Malaysia Sabah. (Unpublished)
Tu, Frances Juan Yu (2008) Numerical and statistical analysis of energy content of Shell-Fibre-EFB mixture 2. Universiti Malaysia Sabah. (Unpublished)
Ho, Koon Chang (2015) Development and characterization of a small-scale conductivity probe. Universiti Malaysia Sabah.
Chan, Kok Peng (2007) Analysis and design of multi-storeyed buildings using STAAD.PRO and ESTEEM. University Malaysia Sabah. (Unpublished)
Ahmad Fairus Md Yusof (2004) Rekabentuk pembilang optikal yang praktikal. Universiti Malaysia Sabah. (Unpublished)
Azaizul Ahmad (2006) Penyediaan dan pencirian filem nipis aloi emas-Palladium (Au-Pd). Universiti Malaysia Sabah. (Unpublished)
Article
Olarewaju, Akinola J. and Rao, Nittala Surya Venkata Kameswara and Md. Abdul Mannan (2010) Guidelines for the design of buried pipes to resist effects of internal explosion, open trench and underground blasts. Electronic Journal of Geotechnical Engineering, 15J. pp. 1-13. ISSN 1089-3032
Akinola J. Olarewaju and Rao, Nittala Surya Venkata Kameswara and Md. Abdul Mannan (2010) Response of underground pipes due to blast loads by simulation - an overview. Electronic Journal of Geotechnical Engineering, 15H. pp. 1-22. ISSN 1089-3032
Akinola J. Olarewaju and Rao, Nittala Surya Venkata Kameswara and Md. Abdul Mannan (2010) Blast effects on underground pipes. Electronic Journal of Geotechnical Engineering, 15G. pp. 1-14. ISSN 1089-3032
Chu, Christopher C. M. (2005) Improved heat transfer predictions for air-cooked heat exchangers. Chemical Engineering Prograesses, 101 (11). pp. 46-48. ISSN 0360-7275
Jedol Dayou and M., J. Brennan (2003) Experimental verification of the optimal tuning of a tunable vibration neutralizer for global vibration control. Applied Acoustics, 64 (3). pp. 311-323. ISSN 0003-682X
Jedol Dayou (2005) A new application of the fixed-points theory for the control of kinetic energy of a continuous structure. International Journal of Acoustics and Vibrations, 10 (4). pp. 170-174. ISSN 10275851
Coswald Stephen Sipaut @ Mohd Nasri and Ismail Ab Rahman and Mohammad Jafarzadeh (2012) Synthesis of silica–polypyrrole core–shell nanocomposite using in situ γ-aminopropyltriethoxysilane (APTES)-modified nanosilica. Synthetic Metals, 162 (5-6). pp. 466-476. ISSN 0379-6779
Saafie Salleh and Harvey, N. Rutt and Mohd Noh Dalimin and Muhamammad Mat Salleh (2011) Cold deposition of zinc sulfide optical waveguides using thermoelectric device. Advanced Materials Research, 264-26. pp. 856-861. ISSN 1022-6680
Olarewaju, Akinola Johnson and Kamaeswara Rao, N. S. V. and Md. Abdul Mannan (2011) Dimensionless response of underground pipes due to blast loads using finite element method. Electronic Journal of Geotechnical Engineering, 16. pp. 563-574. ISSN 1089-3032
Chin, Chia Seet and Prabhakaran Neelakantan and Yoong, Hou Pin and Teo, Kenneth Tze Kin (2011) Optimisation of fuzzy based maximum power point tracking in pv system for rapidly changing solar irradiance. Global Journal of Technology & Optimization (GJTO), 2. pp. 130-137. ISSN 2229-8711
Siew, Zhan Wei and Wong, Chen How. and Aroland M'conie Jilui Kiring and Chin, Renee Ka Yin and Teo, Kenneth Tze Kin (2012) Fuzzy logic based energy efficient protocol in wireless sensor networks. ICTACT Journal on Communication Technology (IJCT), 3 (4). pp. 639-645. ISSN 2229-6948
Chia, Yee Shin and Teo, Kenneth Tze Kin. and Yang, Soo Siang and Yew, Hoe Tung and Siew, Zhan Wei (2012) An evolutionary algorithm for channel assignment problem in wireless mobile networks. ICTACT Journal on Communication Technology (IJCT). pp. 613-618. ISSN 2229-6948
Harimi Djamila and Chu, Chi Ming and Sivakumar Kumaresan (2013) Field study of thermal comfort in residential buildings in the equatorial hot-humid climate of Malaysia. Building and Environment, 62. pp. 133-142. ISSN 0360-1323
Pogaku Ravindra and Rahmath Abdulla (2013) Characterization of cross linked Burkholderia cepacia lipase in alginate and κ-carrageenan hybrid matrix. Journal of the Taiwan Institute of Chemical Engineers. ISSN 1876-1070
Rosalam Sarbatly and Chiam, Chel Ken (2013) Evaluation of geothermal energy in desalination by vacuum membrane distillation. Applied Energy.
Aminul Islam and Chan, Eng-Seng and M. Moniruzzaman and Pogaku Ravindra and Yun Hin Taufiq-Yap (2013) Development of a procedure for spherical alginate–boehmite particle preparation. Advanced Powder Technology. ISSN 0921-8831
Noraini Abdullah and Zainodin Hj. Jubok and Amran Ahmed (2012) Comparisons between Huber’s and Newton’s Multiple Regression Models for Stem Biomass Estimation. Malaysian Journal of Mathematical Sciences, 6 (1). pp. 1-28. ISSN 1823-8343
Aminul Islam and Yap, Taufiq Yun Hin and Pogaku, Ravindra and Chan, Eng Seng and Chu, Chi Ming (2013) Transesterification of palm oil using KF and NaNO3 catalysts supported onspherical millimetric γ-Al2O3. Renewable Energy, 59. pp. 23-29. ISSN 0960-1481
Mei, Yeen Choong and Wei, Yeang Kow and Wei, Leong and Liau, Chung Fan and Tze, Kenneth Kin Teo (2012) An Image Segmentation using Normalised Cuts in Multistage Approach. International Journal of Simulation Systems, Science & Technology, 13 (3B). pp. 10-16. ISSN 1473-8031
Yeo, Kiam Beng and Mohd Noh Dalimin and Mohd Aidy Faizal Johari (2007) Mode-I Toughness and Curing Pressure Characteristic of Symmetrical Lay-Up of Plain-Weave Woven GFRP Composites. Journal of Applied Sciences, 7 (15). pp. 2174-2182. ISSN 1812-5654
Shee, Eng Tan and Zhan, Wei Siew and Khairul Anuar Mohamad and Ismail Saad and Teo, Kenneth Tze Kin (2012) Network Coding Based Packets Queue Operation for Wireless Ad Hoc Networks. International Journal of Simulation: Systems, Science and Technology, 13 (3B). pp. 23-29. ISSN 1473-8031
Kang, Chiang Liew and Lian, Kim Khor (2013) Effect of different ratios of bioplastic to newspaper pulp fibres on the weight loss of bioplastic pot. Journal of King Saud University - Engineering Sciences. ISSN 0964-8305
Duduku Krishnaiah and S.M. Anisuzzaman and Awang Bono and Rosalam Sarbatly (2013) Adsorption of 2,4,6-trichlorophenol (TCP) onto activated carbon. Journal of King Saud University – Science, 25. pp. 251-255. ISSN 1018-3647
Soheila Farajia and Afidah Abdul Rahima and Norita Mohameda and Coswald Stephen Sipautb and Bothi Rajaa (2013) Corrosion resistance of electroless Cu–P and Cu–P–SiC composite coatings in 3.5% NaCl. Arabian Journal of Chemistry, 6. pp. 379-388. ISSN 1878-5352
Awang Bono and S.M. Anisuzzaman and Ong Wan Ding (2012) Effect of process conditions on the gel viscosity and gel strength of semi-refined carrageenan (SRC)produced from seaweed (Kappaphycus alvarezii). Journal of King Saud University – Engineering Sciences. ISSN 1018-3639
Chuah, Puoi Choo and Aini Janteng (2013) Estimate on the second hankel functional for a subclass of close-to-convex functions with respect to symmetric points. International Journal of Mathematical Analysis, 7 (16). pp. 781-788. ISSN 1312-8876
Chow, Man Sang and Jedol Dayou and Willey Y. H. Liew (2013) Increasing the Output from Piezoelectric Energy Harvester Using Width-Split Method with Verification. International Journal of Precision Engineering and Manufacturing, 14 (12). pp. 2149-2155. ISSN 2005-4602
Abdullah Chik and Nazli Ahmad Aini and Haider F. Abdul Amir (2014) Physical characteristic of Zn doped soft ferrites MxZn 1-x Fe2O4. Key Engineering Materials, 594-59. pp. 39-43. ISSN 10139826
Pogaku Ravindra and Gim, Pao Lim and Hui, Yen Ong and Boon, Beng Lee and Muhammad Syarhabil Ahmad and Harbant Singh (2014) Effects of process variables on size of Chitosan-alginate capsules through extrusion-dripping method. Advanced Materials Research, 925. pp. 8-12. ISSN 10226680
Siti Jahara Matlan and Muhammad Mukhlisin and Mohd Raihan Taha (2014) Performance evaluation of four-parameter models of the soil-water characteristic curve. Scientific World Journal, 2014. ISSN 1537744X
Lee, Boon Beng and Chan, Eng Seng and Pogaku Ravindra (2014) Calcium pectinate beads formation: Shape and size analysis. Journal of Engineering and Technological Sciences, 46B (1). pp. 78-92. ISSN 23375779
Shaban Ismael Albrka and Amiruddin Ismail and Mohd Azizul Ladin and Hussin A.M Yahia (2014) Application of transyt-7f on signalized road junction networks in Shah Alam and Petaling Jaya. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 59-64. ISSN 1279696
Mohd Azizul Ladin and Amsori Muhammad Das and A. Najah and Amiruddin Ismail and Riza Atiq Abdullah O.K. Rahmat (2014) A review of strategies to implement sustainable urban transportation options in Malaysia. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 85-90. ISSN 1279696
Nazera M. Ismail and Ahmad Fauzi Ismail and Azizul Azri Mustaffa (2014) Characterization of polyethersulfone/cloisite 15A mixed matrix membrane for CO2/CH4 separation. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 9-83. ISSN 1279696
Mountstephens, James , (2014) Towards computer-generated mnemonic phrases: Experiments with genetic algorithms and N-grams. ARPN Journal of Engineering and Applied Sciences, 9 (9). pp. 1386-1393. ISSN 1819-6608
Jedol Dayou, and Jaehwan Kim and Jongbeom Im and Lindong Zhai and Liew, Willey ,Yun Hsien and Ting , Aaron,Chuan How (2015) The effects of width reduction on the damping of a cantilever beam and its application in increasing the harvesting power of piezoelectric energy harvester. Smart Materials and Structures, 24 (4). ISSN 0964-1726
Mailin Misson and Hu Zhang and Bo Jin (2015) Nanobiocatalyst advancements and bioprocessing applications. Journal of the Royal Society Interface, 12 (102). ISSN 17425689
Sulaiman H.A.B. and Othman M.A. and Aziz M.Z.A.A. and Abdullah Bade (2015) Review on narrow phase collision detection system in virtual environment. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 691-700. ISSN 1819-6608
Mohd Kamal Mohd Shah and Perowansa Paruka and Waluyo Adi Siswanto and Md Abdul Maleque (2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force. Journal of Mechanical Science and Technology, 29 (5). pp. 1941-1953. ISSN 1738-494X (Print) 1976-3824 (Online)
Rosalam Sarbatly and Duduku Krishnaiah, and Richard England and Sariah Abang and Jeanette Jeffery (2007) Comparison studies of appliedpressure and concentration gradient driving forces in ceramic Nano Filtration Membrane for the production of intravenous salt solution. Journal of Applied Sciences, 7 (15). pp. 2069-2075. ISSN 1812-5654
Joko Sulistyo and Toshimitsu Hata and Masashi Fujisawa and Kozo Hashimoto and Yuji Imamura and Tamami Kawasaki (2009) Anisotropic thermal conductivity of three-layer laminated carbon-graphite composites from carbonized wood. Journal of Materials Science, 44 (3). pp. 734-744. ISSN 0022-2461
Nader Nassif Barsoum (2012) Performance of direct torque control implemented in speed drive. Global Journal of Technology & Optimization (GJTO), 3. ISSN 2229-8711
Coswald Stephen Sipaut @ Mohd Nasri and Rachel Fran Mansa and Vejayakumaran Padavettan and Ismail Ab. Rahman and Jedol Dayou and Mohammad Jafarzadeh (2015) The effect of surface modification of silica nanoparticles on the morphological and mechanical properties of bismaleimide/diamine matrices. Advances in Polymer Technology, 34 (2).
Chu, Chi-Ming and Md Mizanur Rahman and Sivakumar Kumaresan (2016) Improved thermal energy discharge rate from a temperature-controlled heating source in a natural draft chimney. Applied Thermal Engineering, 98. pp. 991-1002.
Mookiah Saminathan and Sieo, Chin Chin and Han, Ming Gan and Norhani Abdullah and Vui Ling Wong, Clemente Michael and Yin, Wan Ho (2016) Effects of condensed tannin fractions of different molecular weights on population and diversity of bovine rumen methanogenic archaea in vitro, as determined by high-throughput sequencing. Animal Feed Science and Technology, 216. pp. 146-160. ISSN 3778401
Siow, Hwa Teo and Aminul Islam and Yun Hin Taufiq-Yap (2016) Algae derived biodiesel using nanocatalytic transesterification process. Chemical Engineering Research and Design, 111. pp. 362-370. ISSN 2638762
Lillian Gungat and Nur Izzi Md. Yusoff and Meor Othman Hamzah (2016) Effects of RH-WMA additive on rheological properties of high amount reclaimed asphalt binders. Construction and Building Materials, 114. pp. 665-672. ISSN 9500618
Abdul Karim Mirasa and M. Abedi and M.S. Fathi and N.M. Rawai (2016) Integrated collaborative tools for precast supply chain management. Scientia Iranica, 23 (2). pp. 429-448. ISSN 1026-3098
Asmahani Awang and Sib Krishna Rishna Ghoshal and Md Rahim Sahar and Ramli Arifin (2016) Tailoring spectroscopic properties of Er3+doped zinc sodium tellurite glass via gold nanoparticles. Jurnal Teknologi, 78 (3-2). pp. 139-144. ISSN 0127-9696
Liew, Willey Yun Hsien and Roonie Protasius and Ling, Jester L. J and Nancy Julius Siambun and Noor Ajian Mohd Lair (2016) Reciprocating wear behavior of mild steel carburized using Na₂CO₃-NaCl. Tribology International, 95. pp. 406-418. ISSN 0301-679X
Haider F. Abdul Amir and Saafie Salleh and Abu Hassan Husin and Fuei, Pien Chee (2016) A model for neutron radiation damage in Metal Oxide Semiconductor (MOS) structures. Key Engineering Materials, 706. pp. 51-54. ISSN 10139826
Coswald Stephen Sipaut @ Mohd Nasri and Soheila Faraji and Afidah Abdul Rahim and Norita Mohamed and Bothi Raja (2011) The influence of SiC particles on the corrosion resistance of electroless, Cu–P composite coating in 1 M HCl. Materials Chemistry and Physics, 129 (3). pp. 1063-1070. ISSN 0254-0584
Abu Zahrim Yaser and Ricky L. N. S. and Shahril Yusof and Rosalam Sarbatly and Nurmin Bolong and Ahmad Mukifza Harun and Azreen Ibrahim (2015) Partly decomposed empty fruit bunch fiber as a potential adsorbent for ammonia-nitrogen from urban drainage water. Proceedings of the International Civil and Infrastructure Engineering Conference 2014 (7). pp. 989-1001. ISSN 978-981-287-289-0
Bablu K. Ghosh and Saiful S. M. Zainal and Ismail Saad and Khairul Anuar Mohamad (2016) InGaN photocell significant efficiency enhancement on Si-an influence of interlayer physical properties. International Journal of Energy Research, 40 (9). pp. 1271-1279. ISSN 1099-114X
Perowansa Paruka and Md Hafizil Mat Yasin and Rizalman Mamat and Md Abdul Malequeand Md and Md Kamal Md Shah (2015) Crush zone morphology of epoxy glass fiber aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research, 1115. pp. 258-261. ISSN 10226680
Muralindran Mariappan and Ali Chekima and Khoo, Brendan and Wee, Choo Chee and Wong, W.K. (2013) Co-occurrence matrix with neural network classifier for weed species classification: a comparison between direct application of co-occurrence matrix (GLCM) and haralick features as inputs. International Journal of Enhanced Research in Science Technology & Engineering, 2 (2). pp. 1-8. ISSN 2319-7463
Muralindran Mariappan and Manimehala Nadarajan and Karthigayan Muthukaruppan (2013) LabVIEW based intelligent frontal & non-frontal face recognition system. International Journal of Computer Science and Electronics Engineering (IJCSEE), 1 (1). pp. 136-140. ISSN 2320–4028
Hung, Lai Po and Rayner Alfred and Mohd Hanafi Ahmad Hijazi (2015) A review on feature selection methods for sentiment analysis. Advanced Science Letters, 21 (10). pp. 2952-2956. ISSN 1936-6612
Abu Zahrim Yaser and A. Nasimah and N. Hilal (2015) Coagulation/Flocculation of lignin aqueous solution in single stage mixing tank system: modeling and optimization by response surface methodology. Journal of Environmental Chemical Engineering, 3 (3). pp. 2145-2154.
Lukui Jin and Razak Mohd Ali Lee and Ian Robertson (2014) Analysis and design of a novel low-loss hollow substrate integrated waveguide. IEEE Transactions on Microwave Theory and Techniques, 62 (8). pp. 1616-1624. ISSN 0018-9480
Teo, Jason Tze Wi and Asni Tahir and Norhayati Daut and Nordaliela Mohd Rusli and Norazlina Khamis (2016) Fixed vs. self-adaptive crossover first differential evolution. Applied Mathematical Sciences, 10 (32). pp. 1603-1610. ISSN 1312-885X
Janice Lynn Ayog and Salinah Dullah and Rosdianah Ramli (2016) Harvested rainwater quality assessment on the effects of roof materials to the first flush runoff. Transactions on Science and Technology, 3 (1-2). pp. 271-276. ISSN 2289-8786
Gan, Melvin Jet Hong and Ni, Qing Qing and Toshiaki Natsuki (2016) Bending actuation and charge distribution behavior of polyurethane/carbon nanotube electroactive nanocomposites. Polymer Composites, 37 (1). pp. 262-269. ISSN 1548-0569
Liew, Willey Yun Hsien and Lim, Yee Yan and Kwong, Kok Zee (2016) Non-destructive concrete strength evaluation using PZT based surface wave propagation technique – a comparative study. MATEC Web of Conferences, 47. 02014-p.1. ISSN 2261-236X
Nur Indang Marzuki and Fatimah Abu Bakar and Abu Bakar Salleh and Lee, Yook Heng and Nor Azah Yusof and Shafiquzzaman Siddiquee (2012) Development of electrochemical biosensor for formaldehyde determination based on immobilized enzyme. International Journal of Electrochemical Science, 7 (7). pp. 6070-6081. ISSN 1452-3981
A P V Naigam and I M B Ridzuan and A S T Tan and A Abdullah and W A A Z Wan Ismail and Jidon Adrian Janaun (2020) Design, development and performance evaluation of a large-scale hybrid solar dryer. IOP Conference Series: Materials Science and Engineering, 1070. pp. 1-10. ISSN 1757-899X
Abu Zahrim Yaser and C. Tizaoui and N. Hilal (2011) Removal of highly concentrated industrial grade leather dye: Study on several flocculation and sand filtration parameters. Separation Science and Technology, 46. pp. 883-892. ISSN 1520-5754
Ahmad Nurfaidhi Rizalman and Chen, Choon Lee (2020) Comparison of Artificial Neural Network (ANN) and Response Surface Methodology (RSM) in Predicting the Compressive Strength of POFA Concrete. APPLICATIONS OF MODELLING AND SIMULATION, 4. pp. 210-216. ISSN 2600-8084
Ahmad Nurfaidhi Rizalman and Ng, Seong Yap and Mahmood Md Tahir and Shahrin Mohammad (2018) Parametric Study of Fire Performance of Concrete Filled Hollow Steel Section Columns with Circular and Square Cross-Section. E3S Web of Conferences, 34. pp. 1-8.
Ali Farzamnia and Eng Soo Yew and Ervin Gubin Moung (2020) A Non‑cooperative Uplink Power Control for CDMA Wireless Communication System. Wireless Personal Communications, 114. pp. 1249-1265.
Andrew Bimba and Norisma Idris and Norazlina Khamis and Nurul Fazmidar Mohd Noor (2016) Stemming Hausa text: using affix-stripping rules and reference look-up. Language Resources and Evaluation, 50 (3). pp. 687-703.
Awang Bono and Jumat Sulaiman and S. Rajalingam (2014) Analysis of optimal injection moulding process parameters for thin-shell plastic product using response surface methodology. Journal of Applied Sciences, 14 (23). pp. 3192-3201. ISSN 1812-5654
Bablu K. Ghosh and Abdul I. A. Rani and Khairul A. Mohamad and Ismail Saad (2020) Low Leakage Current by Solution Processed PTAA-ZnO Transparent Hybrid Hetero-Junction Device. Electronic Materials Letters. pp. 1-9.
Caleb Acquah and Michael K. Danquah and Charles K. S. Moy and Clarence M. Ongkudon (2016) In‐process thermochemical analysis of in situ poly(ethylene glycol methacrylate‐co‐glycidyl methacrylate) monolithic adsorbent synthesis. Journal of Applied Polymer Science, 133 (22). ISSN 0021-8995
Chew, Ing Ming and Wong, F. and Awang Bono and Jobrun Nandong and Wong, K.I. (2020) Genetic algorithm optimization analysis for temperature control system using cascade control loop model. International Journal of Computing and Digital Systems, 9 (1). ISSN (2210-142X
Chiam, Chel Ken and Zykamilia Kamin and K. Duduku and M. Nurashiqin and Noor Maizura Ismail and Rosalam Sarbatly (2019) Coalescence of Oil Droplets using Sponge-like Structure of Polyvinylidene Fluoride Membranes. J. Applied Membrane Science & Technology, 23 (1). pp. 25-35.
Chua, Bee Seok and Harris Shah Abd Hamid and Jasmine Adela Mutang (2018) Psychometric Properties of the State-Trait Anxiety Inventory (Form Y) among Malaysian University Students. Sustainability, 10 (9). pp. 1-13.
Chua, Bih Lii and Ho-Jin Lee and Dong-Gyu Ahn (2020) Estimation of Appropriate Process Parameters for a Plasma Electron Beam Re-Melting Process Using Finite Element Analysis. Journal of the Korean Society for Precision Engineering, 37 (1). pp. 75-82. ISSN 1225-9071
Chung, Seng Kheau and Chua, Bih Lii and Mark Irwin Goh and Syed Shajee Husain and Yew, Hoe Tung and Abbas Ibrahim Mbulwa (2020) Enhanced Bandwidth Based Handover Decision Making Algorithm For Small Cell Wireless Networks. IEEE. pp. 1-6.
Collin G. Joseph and Awang Bono and Duduku Krishnaiah and Chow, Yee Ling and Ng, Chiew Ban (2009) Morphology And Sorption Kinetic Studies Of L Type Activated Carbons Prepared From Oil Palm Shells By ZnCl2 And H3PO4 Activation. Journal of Applied Sciences, 9 (17). pp. 3131-3135. ISSN 1812-5654
Coswald Stephen Sipaut @ Mohd Nasri and Norariza Ahmad and Rohana Adnan and Rahman I.Ab (2007) Properties and morphology of bulk epoxy composites filled with modified fumed silica-epoxy nanocomposites. Journal of Applied Sciences, 7 (1). pp. 27-34. ISSN 1812-5654
Dhabit Zahin and Ahmad Nurfaidhi Rizalman (2020) Properties of cement mortar containing NaOH-treated Crumb rubber as fine aggregate replacement. Earth and Environmental Science, 476. pp. 1-8.
Dhabit Zahin Alias Tudin and Ahmad Nurfaidhi Rizalman (2020) Effect of Water-Cement Ratio on the Properties of NaOH-Treated Rubberized Mortar. Key Engineering Materials, 862. pp. 135-139.
Florence Sia Fui Sze and Rayner Alfred (2019) Tree-based mining contrast subspace. International Journal of Advances in Intelligent Informatics, 5 (2). pp. 169-178. ISSN 2442-6571 (P-ISSN) , 2548-3161 (E-ISSN)
Gianluca Li Puma and Duduku Krishnaiah and Awang Bono and Collin G. Joseph (2008) Preparation of titanium dioxide photocatalyst loaded onto activated carbon support using chemical vapor deposition: a review paper. Journal of Hazardous Material (Elsevier BV), 157 (2-3). pp. 209-219.
Habib M. Mohamad and Nurul Shahadahtul Afizah Asman and Abdul Karim bin Mirasa and Ismail Saad and Nurmin Bolong and Steven C. C. K. and Siti Nooraiin M. R. (2021) A consistency check of concrete compressive strength using pearson’s correlation coefficient. Civil Engineering Journal, 7 (3). pp. 541-548. ISSN 2676-6957 (P-ISSN) , 2476-3055 (E-ISSN)
Habib Musa Mohamad and Adnan Zainorabidin and Siti Nurul Aini Zolkefle (2020) The Determination Of Post-Cyclic Yield’s Strength And Initial Stiffness Of Two Peat Soils. International Journal of GEOMATE, 18 (70). pp. 172-177. ISSN 2186-2982
Habib Musa Mohamad and Z. Adnan and Siti N. M. Razalin and Siti N. A. Zolkefle (2020) Assessment for applicability of microwave oven in rapid determination of moisture content in peat soil. Journal of Engineering Science and Technology, 15 (3). pp. 2110-2118.
Hafeza Abu Bakar and J. Faruqi and Farhana Abd Lahin and S. M. Anisuzzaman and Emma Suali (2019) Anti-wax nickel-based coating for stainless steel pipeline. Journal of Advanced Research in Materials Science, 52 (1). pp. 9-15. ISSN 2289-7992
Hamid Teimourzadeh and Behnam Mohammadi-Ivatloo and Ali Farzamnia (2019) Wild goats optimization approach for capacitor placement problem. The International Journal of Integrated Engineering, 11. pp. 31-39. ISSN 2229-838X (P-ISSN) 2600-7916 (E-ISSN)
Harimi Djamila and Chu, Chi Ming and Sivakumar Kumaresan (2012) A conceptual review on residential thermal comfort in the humid tropics. International Journal of Engineering Innovation & Research, 1 (3). pp. 539-544. ISSN 2277-5668
Harimi Djamila and Mariani Rajin and Ahmad Nurfaidhi Rizalman (2018) Energy Efficiency through Building Envelope in Malaysia and Singapore. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 96-105. ISSN 2289-7879
Herwansyah Lago and Ping, Jack Soh and Mohd Faizal Jamlos and Zahriladha Zakaria (2018) Beam‐reconfigurable crescent array antenna with AMC plane. International Journal of RF and Microwave Computer-Aided Engineering, 28 (7).
Ian Kevin Witus and Chin Kim On and Rayner Alfred and Ag Asri Ag Ibrahim and Tan Tse Guan and Patricia Anthony (2018) A Review of Computer Vision Methods for Fruit Recognition. Advanced Science Letters, 24 (2). pp. 1538-1542. ISSN 1936-6612
Ismail Abd Rahim and Junaidi Asis and Mohamed Ali Yusuf Mohd Husin (2018) Comparison of basic friction angle in kinematic analysis. Malaysian Journal of Geosciences, 2 (1). pp. 38-41. ISSN 2521-0602
Ismail Saad and Bablu Kumar Ghosh and Mohd Zuhir Hamzah and Wong, Jen Hoe and Tan, Jia Min and Nurmin Bolong (2020) Electrospinning Growth Parameters Dependent PVP: PC71BM Nanofiber Structure Characterizations and Modeling. Journal of Membrane Science & Research, 6. pp. 433-437.
Ismail Saad and Mohd. Zuhir H and Bablu K. Ghosh and Nurmin Bolong (2020) High Performance Vertically Aligned Electrospun PVP:PC71BM Nanofiber for Organic Solar Cells. IEEE Xplore.
J. K. Ong and Lillian Gungat and Meor Othman Hamzah (2020) Fracture properties of reclaimed asphalt pavement mixtures with rejuvenator. Construction and Building Materials, 259.
J.K. Ong and Lillian @ Lilia Gungat and M.O. Hamzah (2020) Fracture properties of reclaimed asphalt pavement mixtures with rejuvenator. Construction and Building Materials, 259. pp. 1-10. ISSN 0950-0618
J.K. Ong and Lillian Gungat and Meor Othman Hamzah (2020) Fracture properties of reclaimed asphalt pavement mixtures with rejuvenator. Construction and Building Materials, 259.
Jodin Makinda and Khairul Anuar Kassim and Kamarudin Ahmad and Abubakar Sadiq Muhammed and Muttaqa Uba Zango (2020) Geochemical Evaluation of Contaminated Soil for Stabilisation Using Microbiologically Induced Calcite Precipitation Method. International Journal of Advanced Science and Technology, 29 (7). pp. 2375-2382.
K A A Latiff and Ahmad Nurfaidhi Rizalman and N S H Harith and S M S A Razak and Mazizah E Mohamad (2020) 3D Numerical modelling on the thermal performance of reinforced concrete encased wide-flanged steel column. Earth and Environmental Science, 476. pp. 1-8.
Kai, Sing Liow and Coswald Stephen Sipaut and Mohammad Jafarzadeh (2018) Polypyrrole- and polyaniline-surface modified nanosilica as quasi-solid state electrolyte ingredients for dye-sensitized solar cells. Journal of Materials Science: Materials in Electronics, 29 (24). pp. 21097-21108.
Kashif Nisar and Zulqurnain Sabir and Muhammad Asif Zahoor Raja and Ag. Asri Ag. Ibrahim and Fevzi Erdogan and Muhammad Reazul Haque and Joel J. P. C. Rodrigues and Danda B. Rawat (2021) Design of morlet wavelet neural network for solving a class of singular pantograph nonlinear differential models. IEEE Access, 9. pp. 77845-77862. ISSN 2169-3536
Khayet M and Abu Zahrim Yaser and N.Hilal (2011) Modelling and optimisation of coagulation of highly concentrated industrial grade leather dye by response surface methodology. Chemical Engineering Journal, 167 (1). pp. 77-83. ISSN 13858947
Liew, Willey Yun Hsien and B.K.A. Ngoi and Y.G. Lu (2003) Wear characteristics of PCBN tools in ultra-precision machining of stainless steel at low cutting speeds. Wear, 254 (3-4). pp. 265-277. ISSN 0043-1648
Liew, Willey Yun Hsien and Y.G. Lu and X. Ding and B.K.A. Ngoi and S. Yuan (2004) Performance of uncoated and coated carbide tools in the ultra-precision machining of stainless steel. Tribology Letters, 17 (2). pp. 851-857. ISSN 1573-2711
Liew, Willey Yun Hsien and Yeo, Kiam Beng and Mohd Azlan Ismail (2011) Fracture behaviour of tropical hardwood under tensile load. International Journal on Advanced Science, Engineering and Information Technology, 1 (5). pp. 560-563. ISSN 2088-5334
Lillian Gungat and Kurian V. John and Rohayah Ladom (2011) Supply chain and life cycle cost of roofing in Sabah: a case study. Journal of Surveying, Construction & Property, 2. pp. 82-92. ISSN 1985-7527
Lim, Jia Zheng and James Mountstephens and Jason Teo (2020) Comparing Eye-Tracking versus EEG Features for Four-Class Emotion Classification in VR Predictive Analytics. International Journal of Advanced Science and Technology, 29 (6). pp. 1492-1497.
Liow, Kai Sing and Coswald Stephen Sipaut @ Mohd Nasri and Rachel Fran Mansa and Jedol Dayou (2014) Dye sensitized solar cell based on polyethylene glycol/4, 4-diphenylmethane diisocyanate copolymer quasi solid state electrolyte. Applied Mechanics and Materials, 625. pp. 140-143. ISSN 1660-9336
M. F. Hamida and N. Yusof and Noor Maizura Ismail and M. A. Azali (2020) Role of membrane surface charge and complexation-ultrafiltration for heavy metals removal: a mini review. J. Applied Membrane Science & Technology, 24 (1). pp. 39-49.
M.J. Jimmy and A.M. Harun and M.Y.A. Rahman and N.A. Ludin (2020) Comparative Study of Dye-Sensitized Solar Cell Utilizing Seaweed and Rose Bengal Sensitizer: Influence of Dye Concentration. International Journal of ELECTROCHEMICAL SCIENCE, 15. 3219 -3231.
Madihan Yusof and Junidah Lamaming and Rokiah Hashim and Mohd Firdaus Yhaya and Othman Sulaiman and Mohd Ezwan Selamat (2020) Flame retardancy of particleboards made from oil palm trunk-poly(vinyl) alcohol with citric acid and calcium carbonate as additives. Construction and Building Materials, 263 (2020). pp. 1-8. ISSN 0950-0618
Mahsa Malekzadeh and Saeed Meshgini and Reza Afrouzian and Ali Farzamnia and Sobhan Sheykhivand (2020) Removing mixture of Gaussian and Impulse noise of images using sparse coding. IEEE.
Mailin Misson and Bo, Jin and Binghui, Chen and Hu, Zhang (2015) Enhancing enzyme stability and metabolic functional ability of β-galactosidase through functionalized polymer nanofiber immobilization. Bioprocess and Biosystems Engineering, 38 (10). pp. 1915-1923. ISSN 1615-7605
Marcel Schweiker and Maíra André and Farah Al-Atrash and HananAl-Khatri and Rea Risky Alprianti and Hayder Alsaad and Rucha Amin and Eleni Ampatzi and Alpha Yacob Arsano and Elie Azar and Bahareh Bannazadeh and Amina Batagarawa and Susanne Becker and Carolina Buonocore and Bin Cao and Joon-HoChoi and Chungyoon Chun and Hein Daanen and Siti Aisyah Damiati and Lyrian Daniel and Renata De Vecchi and Shivraj Dhaka and Samuel Domínguez-Amarillo and Edyta Dudkiewicz and Lakshmi Prabha Edappilly and Jesica Fernández-Agüera and Mireille Folkerts and Arjan Frijns and Gabriel Gaona and Vishal Garg and Stephanie Gauthier and Shahla Ghaffari Jabbari and Harimi Djamila and Runa T.Hellwig and Gesche M Huebner and Quan Jin and Mina Jowkar and Jungsoo Kim and Nelson King and Boris Kingma and M. Donny Koerniawan and Jakub Kolarik and Shailendra Kumar and Alison Kwok and Roberto Lamberts and Marta Laska and M.C. Jeffrey Lee and Yoonhee Lee and Vanessa Lindermayr and Mohammadbagher Mahaki and Udochukwu Marcel-Okafor and Laura Marín-Restrepo and Anna Marquardsen and Francesco Martellotta and Jyotirmay Mathur and Isabel Mino-Rodriguez and Azadeh Montazami and Di Mou and Bassam Moujalled and Mia Nakajima and Edward Ng and Marcellinus Okafor and Mark Olweny and Wanlu Ouyang and Ana Lígia Papst de Abreu and Alexis Pérez-Fargallo and Indrika Rajapaksha and Greici Ramos and Saif Rashid and Christoph F.Reinhart and Ma. Isabel Rivera and Mazyar Salmanzadeh and Karin Schakib-Ekbatan and Stefano Schiavon and Salman Shooshtarian and Masanori Shukuya and Veronica Soebarto and Suhendri Suhendri and Mohammad Tahsildoost and FedericoTartarini and Despoina Teli and Priyam Tewari and Samar Thapa and Maureen Trebilcock and Jörg Trojan and Ruqayyatu B.Tukur and Conrad Voelker and Yeung Yam and Liu Yang and Gabriela Zapata-Lancaster and Yongchao Zhai and Yingxin Zhu and ZahraSadat Zomorodian (2020) Evaluating assumptions of scales for subjective assessment of thermal environments – Do laypersons perceive them the way, we researchers believe? Energy & Buildings, 211. ISSN 0378-7788
Mariani Rajin and A H Kamaruddin (2016) Effect of temperature on Candida antartica lipase B activity in the kinetic resolution of acebutolol. IOP Conference Series: Earth and Environmental Science, 36 (1). pp. 12-61.
Mariani Rajin and Asiah Zulkifli and Sariah Abang and S.M Anissuzzaman and Azlina Harun Kamaruddin (2020) Effect of Reaction Parameters on the Lipase-Catalyzed Kinetic Resolution of (RS)-Metoprolol. AJChE, 20 (1). pp. 20-30.
Milad Abaspoor and Saeed Meshgini and Tohid Yousefi Rezaii and Ali Farzamnia (2020) A Novel Method for Detecting Breast Cancer Location Based on Growing GA-FCM Approach. IEEE.
Min, Keng Tan and Chuo, Helen Sin Ee and Farm, Yan Yan and Heng, Jin Tham and Teo, Kenneth Tze Kin (2021) Control of exothermic batch process using multivariable genetic algorithm. International Journal of Simulation: Systems, Science and Technology, 13. pp. 19-25. ISSN 1473-8031
Mohamad Nasir Mohamad Ibrahim and Mohamed Rashid Ahmed-Haras and Coswald Stephen Sipaut @ Mohd Nasri and Hassan Y. Aboul-Enein and Abdullahi Ali Mohamed (2010) Preparation and characterization of a newly water soluble lignin graft copolymer from oil palm lignocellulosic waste. Carbohydrate Polymers, 80 (4). pp. 1102-1110. ISSN 0144-8617
Mohammad Amin Mirzaei and Mohammad Hemmati and Kazem Zarek and Behnam Mohammadi-Ivatloo and Mehdi Abapour and Mousa Marzband and Ali Farzamnia (2020) Two-Stage Robust-Stochastic Electricity Market Clearing Considering Mobile Energy Storage in Rail Transportation. IEEE Access, 8. pp. 121780-121794. ISSN 2169-3536
Mohammad Jafarzadeh and Ismail Ab Rahman and Coswald Stephen Sipaut @ Mohd Nasri (2012) Synthesis of silica polypyrrole core shell nanocomposite using in situ γ-aminopropyltriethoxysilane (APTES)-modified nanosilica. Synthetic Metals, 162 (5-6). pp. 466-476. ISSN 0379-6779
Mohd Amran Madlan and Mohd Suffian Misaran and Izzuddin Zaman and Musli Nizam Yahya and Maznan Ismon and Md Zainorin Kasron and Muhammad Shafiq Mohd Azahari (2020) The Effect of Sound Absorbing Materials as Sound Absorber on Train. Advanced Research in Natural Fibers, 2 (2). pp. 27-32. ISSN 2682-7409
Mohd Azizul Ladin and Siti Nurmasyittah Binti Ag Besar and Noor Sheena Herayati Harith and Nurmin Bolong and Ismail Saad and Nazaruddin Taha (2020) Pilot study for the modelling of congestion pricing in Kota Kinabalu, Sabah. International Journal of Science and Technology, 6 (1). pp. 33-44. ISSN 2454-5880
Mohd Hardyianto Vai Bahrun and Awang Bono and Nur Kamaliyah Dzil Razman and Zykamilia Kamin (2020) Recovery of Minor Palm Oil Compounds Using Packed Bed Adsorption Column. Jurnal Bahan Alam Terbarukan, 9 (1). pp. 21-29. ISSN 2303-0623
Mohd Jailani Mohd Nor and Nordin Jamaludin and Fadzlita Mohd Tamiri (2004) A preliminary study of sound absorption using multi-layer coconut coir fibers. Electronic Journal "Technical Acoustics", 3. pp. 1-8. ISSN 1819-2408 (E-ISSN) (In Press)
Mohd Kamal Mohd Shah and Yeo Kiam Beng @ Abdul Noor and Sanjay Mohan and Mohd Nizam Husen and Irma Othman and Yen Pin Tan (2020) Experimental and numerical study of the crushing behavior of pultruded composite tube structure. Journal of Polymer Engineering, 40 (7). pp. 615-627. ISSN 2191-0340
Mohd Noh Dalimin and Mohd Sapuan Salit and Mohd Aidy Faizal and Mohd Kamal Mohd Shah (2017) Effect of ply lay-up and curing pressure on void content in GFRP laminates of unsaturated polyester resin-reinforced woven E-glass fibers. Journal of Mechanical Science and Technology, 31. pp. 5779-5784. ISSN 1738-494X
Mohd Suffian Misaran and Rossalam Sarbatly and Md Mizanur Rahman (2014) Rheological properties of kaolin/PolyetherSulfone (PESf) used in hollow fiber fabrication: Effects of content ratio. Applied Mechanics and Materials, 660. pp. 244-248. ISSN 16609336
Mohd Suhairi Md Suhaimin and Mohd Hanafi Ahmad Hijazi and Chung Seng Kheau and Chin Kim On (2021) Real-time mask detection and face recognition using eigenfaces and local binary pattern histogram for attendance system. Bulletin of Electrical Engineering and Informatics, 10 (2). pp. 1105-1113. ISSN 2089-3191 (P-ISSN) , 2302-9285 ( E-ISSN)
Mun, Ki Bae and Ho, Gi Lim and Yeong, Min Park and Seock, Sam Kim and Tae, Gyu Kim (2020) Tribological characteristics of high strength low alloy steel under various environmental conditions. Modern Physics Letters B, 34 (7).
Muralindran Mariappan and Hiu, Fu Shun and Karthigayan Muthukaruppan (2020) Electrical Consumer Panel with Automated Leakage Current Detector System. The International Journal of Integrated Engineering, 12 (2). pp. 46-54.
N N Safie and Abu Zahrim Yaser and Mariani Rajin and Noor Maizura Ismail and Sariah Saalah and S M Anisuzzaman and A D Rahayu and H Huslyzam and R Jennisha and T T H Calvin (2019) Adsorption of ammonium ion using zeolite, chitosan, bleached fibre and activated carbon. IOP Conference Series: Materials Science and Engineering, 606. pp. 1-4. ISSN 1757-899X
N S Nurdin and Sariah Saalah and A T Lim and A Y Francis and L Abdullah and S SaifulAzry (2020) Effect of DMPA Content on Colloidal Stability of Jatropha Oil-based waterborne Polyurethane Dispersion. IOP Conf. Series: Materials Science and Engineering, 778. pp. 1-9.
Nader Nassif Barsoum and Farah Talib (2020) Energy Saving Analysis and Simulation for Home Electricity. Journal of Power and Energy Engineering, 8. pp. 35-50. ISSN 2327-5901
Ngu War Hlaing and Ali Farzamnia and Manas Kumar Haldar and Liau Chung Fan (2020) Investigation of error performance in OFDM with network coding techniques in multiple relay networks. Journal of ELECTRICAL ENGINEERING, 71 (3). pp. 185-194. ISSN 1335-3632
Ngu War Hlaing and Ali Farzamnia and Muralindran Mariappan and Manas Kumar Haldar (2020) Network coding schemes with efficient LDPC coded MIMO–NOMA in two-way relay networks. IET Communications, 14 (2). pp. 337-348.
Noor Maizura Ismail and A.F. Ismail and A. Mustafa and A.K. Zulhairun and F. Aziz and Nurmin Bolong and A.R. Razali (2019) Polymer clay nanocomposites for gas separation: a review. Environmental Contaminants Reviews (ECR), 2. pp. 1-5. ISSN 2637-0778
Noor Maizura Ismail and Nur Afaliza Yusaini and Jannah Jafa and S. M. Anissuzaman and Chiam, Chel Ken and Nurmin Bolong and Akhtar Razul Razali and Ahmad Fauzi Ismail (2020) Carbon dioxide/methane separation performance by mixed matrix membrane from polysulfone/ halloysite nanotubes. Jurnal Teknologi, 82 (3). pp. 91-100. ISSN 2180–3722
Noor Sheena Herayani Harith and Felix Tongkul and Mohd Irwan Adiyanto and Ahmad Nurfaidhi Rizalman (2020) Effect of Long-distance Earthquake from Philippines and Sulawesi to Sabah Region. IOP Conference Series: Earth and Environmental Science (EES), 682. pp. 1-8. ISSN 1755-1307 (P-ISSN) , 1755-1315 (E-ISSN)
Norazlina Khamis and Badamasi Imam Ya’u and Azlin Nordin and Norsaremah Salleh (2019) Experimenting application engineering with requirements pattern for software product families. Journal of Advanced Research in Dynamical and Control Systems, 11. pp. 1206-1217. ISSN 1943-023X
Norfarariyanti Parimon and M. H. Mamat and I. B. Shameem Banu and N. Vasimalai and M. K. Ahmad and A. B. Surian and A. Mohamed and M. Rusop (2020) Fabrication, structural, optical, electrical, and humidity sensing characteristics of hierarchical NiO nanosheet/nanoball fower like structure flms. Journal of Materials Science: Materials in Electronics, 31. pp. 11673-11687.
Nur Zuraimi Zam Jamar and Siew, Nyet Moi (2020) Investigating the Validity and Reliability of a Scientific Imagination Test for Tenth graders. International Journal of Educational Technology and Learning, 8 (2). pp. 52-60. ISSN 2523-0581
Nurliyana Nasuha Safie and Abu Zahrim Yaser and Nidal Hilal (2020) Ammonium ion removal using activated zeolite and chitosan. Asia-Pacific Journal of Chemical Engineering, 15 (3).
Nurulashikin Bahaman and Sk Muiz Sk Abdul Razak and Azlan Adnan and Norrazman Zaiha Zainol and Norhaizura Yahya and Khairunnisa Muhamad and Ahmad Nurfaidhi Rizalman and Mazizah Ezdiani Mohamad and Nur Adibah Ayuni Abd Malek (2018) One-way transnational magnetic mass damper model for structural response control against dynamic loadings. MATEC Web of Conferences, 195. pp. 1-8.
Nyiak, Tien Tang and Lim, Kit Guan and Tan, Min Keng and Yang, Soo Siang and Teo, Kenneth Tze Kin (2020) Dynamic acceleration coefficient of particle swarm optimization in robotics motion coordination. International Journal of Simulation: Systems, Science & Technology. pp. 1-10. ISSN 1473-804x
P Vejayakumaran and Ismail Ab Rahman and Coswald Stephen Sipaut @ Mohd Nasri and C. K. J. Chee (2008) Structural and thermal characterizations of silica nanoparticles grafted with pendant maleimide and epoxide groups. Journal of Colloid and Interface Science, 328 (1). pp. 81-91. ISSN 0021-9797
Perowansa Paruka and Mohd Kamal Mohd Shah and Md Abdul Mannan (2013) Influence of Axial and Oblique Impact Loads on Crush Response Properties of Square Tube Structures Made with FRP Pultruded Composites. Procedia Engineering, 68. pp. 572-578. ISSN 1877-7058
Rachel Fran Mansa and Coswald Stephen Sipaut @ Mohd Nasri and Suhaimi Md Yasir and Jedol Dayou and Costantine Joannes (2018) A Feasibility Study Using Electrolysis Treatment (ET) As the Pre-treatment Method to Extract Lipid from Chlorella sp. for Biodiesel Production. Pertanika J. Sci. & Technol, 26 (4). pp. 1693-1712. ISSN 0128-7680
Raihana Farahiyah Abd Rahman and Hidayati Asrah and Ahmad Nurfaidhi Rizalman and Abdul K. Mirasa and M A A Rajak (2020) Study of eco-processed pozzolan characterization as partial replacement of cement. Journal of Environmental Treatment Techniques, 8 (3). pp. 967-970. ISSN 2309-1185
Rodeano Roslee (2018) Geohazards In Sandakan Town Area, Sabah, Malaysia. Geological Behavior (GBR), 2 (1). pp. 18-23. ISSN 2521-0890
Rohaya Alias and Siti Jahara Matlan and Anuar Kasa (2020) Finite element performance with different mesh size of retaining walls. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (3). pp. 381-389. ISSN 0976-6480
Rosdianah Ramli and Nurmin Bolong (2016) Effects of pressure and temperature on ultrafiltration hollow fiber membrane in mobile water treatment system. Journal of Engineering Science and Technology, 11 (7). pp. 1031-1040. ISSN 1823-4690
S.K. Ghoshal and Asmahani Awang and M.R. Sahar and R. Arifin (2016) Gold nanoparticles stimulated surface plasmon resonance effects in erbium-zinc-sodium-tellurite glass. Materials Science Forum, 846. pp. 52-57. ISSN 1662-9752
S.M. Anisuzzaman and Duduku Krishnaiah and Awang Bono and Farhana Abd Lahin and R.I. Syazryn (2018) Simulation of fermentation compounds for bioethanol production using different separating agents. Pertanika Journal of Science and Technology, 26 (3). pp. 1111-1130.
S.M.A. Tarmizi and N.A. Nordin and S.A. Mazlan and Norzilawati Mohamad and H.A. Rahman and S.A.A. Aziz and N. Nazmi and M.A. Azmi (2020) Incorporation of cobalt ferrite on the field dependent performances of magnetorheological grease. Journal of Materials Research and Technology, 9 (6). pp. 15566-15574. ISSN 2238-7854
Samsul Ariffin Abdul Karim and Muhammad Izzatullah Mohd Mustafa and Bakri Abdul Karim and Mohammad Khatim Hasan and Jumat Sulaiman and Mohd Tahir Ismail (2013) Image reconstruction using singular value decomposition. AIP Conference Proceedings, 152 (1). pp. 269-274. ISSN 0094-243X
Sariah Saalah and Luqman Chuah Abdullah and Min Min Aung and Mek Zah Salleh and Dayang Radiah Awang Biak and Mahiran F. Basri and Emiliana Rose Jusoh and Suhaini Mamat (2018) Colloidal stability and rheology of jatropha oil-based waterborne polyurethane (JPU) dispersion. Progress In Organic Coating, 125. pp. 348-357.
Sharmeena Naido and Rosalyn R. Porle (2018) Survey on face detection methods. International Research Journal of Engineering and Technology (IRJET), 5 (11). pp. 1467-1470. ISSN 2395-0056
Suzelawati Zenian and Tahir Ahmad and Amidora Idris (2018) Fuzzy Inference System for Edge Detection in Flat Electroencephalography Image. ASM Sc. J, 11 (3). pp. 147-152.
Swapan Ghosh and Bablu K. Ghosh (2020) Fossil Fuel Consumption Trend and Global Warming Scenario: Energy Overview. Global Journal of Engineering Sciences, 5 (2). pp. 1-5. ISSN 2641-2039
Tang, Zi Sheng and Nurmin Bolong and Ismail Saad and Rosdianah Ramli and Tiam, Franklin Yang Lim (2016) Effect of polyvinylpyrrolidone and fabrication parameters on electrospun titanium oxide nanofibres’ diameter. Jurnal Teknologi (Sciences and Engineering), 78 (12). pp. 19-24. ISSN 2180-3722
Tay, Lee Yong and Harimi Djamila (2018) Review on Koppen-Geiger System for Indoor Thermal Comfort. International Journal of Engineering Innovation & Research, 7 (4). pp. 220-225. ISSN 2277-5668
Tse, Guan Tan and Jason Teo and Kim, On Chin and Patricia Anthony (2013) Pareto Ensembles for evolutionary Synthesis of Neurocontrollers in a 2D Maze-based video game. Applied Mechanics and Materials. pp. 3173-3177. ISSN 1662-7482
Tsen, Elcy Yi Ching and Chin, Kim On and Rayner Alfred and Mohd Hanafi Ahmad Hijazi and Guan, Tan Tse (2020) An Android Mobile-based Measurement Application - Object and Interior Room Measurement App. International Journal of Interactive Mobile Technologies (iJIM), 14 (20). pp. 135-152.
V Jainih and Noor Sheena Herayani Harith (2020) Seismic vulnerability assessment in Kota Kinabalu, Sabah. IOP Conf. Series: Earth and Environmental Science, 476. pp. 1-9.
W.K. Ling and A. A. Dahalan and Azali Saudi (2020) Mobile robot path navigation in static indoor environment via AOR 9-point laplacian iteration numerical technique. International Journal of Difference Equations (IJDE), 15 (2). pp. 231-242. ISSN 0974-1828
Wahab, A. and Embong, Z. and Hasan, M. and Habib Musa Mohamad and Zaman, Q.U.Z. and Ullah, H. (2020) Peat soil engineering and mechanical properties improvement under the effect of eks technique at parit kuari, Batu Pahat, Johor, West Malaysia. Bulletin of the Geological Society of Malaysia, 70. pp. 133-138. ISSN 0126-6187
Willey Liew and Jester Ling Lih Jie and Yee Yan Lim and Jedol Dayou (2013) Frictional and wear behaviour of AlCrN, TiN, TiAlN single-layer coatings, and TiAlN/AlCrN, AlN/TiN nano-multilayer coatings in dry sliding. Procedia Engineering, 68. pp. 512-517.
Yee, Yan Lim and Kok, Zee Kwong and Yun, Willey Hsien Liew and Chee, Kiong Siew (2016) Non-destructive concrete strength evaluation using smart piezoelectric transducer - a comparative study, smart materials and structures. Smart Materials and Structures, 25 (8). ISSN 0964-1726
Yeo Kiam Beng @ Abdul Noor and Mohd Noh Dalimin and Muaz Abdul Wahab and Hu Lai (2018) Plastic collapse and energy absorption of empty circular aluminum tube under transverse quasi-static loading. Journal of Mechanical Science and Technology, 32 (8). pp. 3611-3613.
Yew, Hoe Tung and Yudha Aditya and Noraini Jalil and Hau, Yuan wen and Eko Supriyanto (2015) Portable teleprenatology system for midwives in rural areas. ARPN Journal of Engineering and Applied Sciences, 10 (3). pp. 1114-1122. ISSN 1819-6608
Yew, Lek Chong and Ka, Renee,Yin Chin (2020) A Study of the Effect of Electrode Dimensions on Scaling Up ERT Applications. IEEE.
Z. A. Ghani and E. Onn and M. Y. Zeain and Apriana Toding and F. A. Azidin and H. Othman and Z. Zakaria and Herwnsyah bin Lago (2020) Peripheral interface controller-based maximum power point tracking algorithm for photovoltaic DC to DC boost controller. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18 (1). pp. 240-250. ISSN 1693-6930
Zhipeng Wang and Yipei Lia and Jian Liu and Tian Gui and Hironori Ogata and Wei Gong and Adavan Kiliyankil Vipin and Yanqing Wang and Gan, Melvin Jet Hong and Josue Ortiz-Medina and Shuwen Wang and Rodolfo Cruz-Silva and Shingo Morimoto and Yoshio Hashimoto and Bunshi Fugetsu and Ichiro Sakata and Mauricio Terrones and Morinobu Endo (2020) Facile synthesis of graphene sheets intercalated by carbon spheres for high-performance supercapacitor electrodes. Carbon, 167. pp. 11-18.
Zulqurnain Sabir and Kashif Nisar and Muhammad Asif Zahoor Raja and Ag. Asri Bin Ag. Ibrahim and Joel J.P.C. Rodrigues and K.S. Al-Basyouni and S.R. Mahmoud and Danda B. Rawat (2021) Heuristic computational design of morlet wavelet neural network for solving the higher order singular nonlinear differential equations. Alexandria Engineering Journal, 60. pp. 5935-5947. ISSN 1110-0168
Book
Sazali Yaacob (2004) Prinsip kejuruteraan kawalan. Penerbit Universiti Malaysia Sabah, Universiti Malaysia Sabah.
V. Viswacheda Duduku and Ali Chekima and Jamal Ahmed Dargham (2018) Performance Evaluation of Proposed Secured Minimum Delay Routing Protocol (SMDRP) in Vehicular Adhoc Network. Advances in Intelligent Systems and Computing, 4 (614). Springer, Cham, Vellore, India, 01-09. ISBN 978-3-31-960617-0
Chapter In Book
Chi-Ming Chu and Raymond Kwok-How Chu and Md. Mizanur Rahman (2012) Experimental study of cold inflow and its effect on draft of chimney. pp. 73-84.
Lai, Po Hung and Rayner Alfred (2017) A performance comparison of feature extraction methods for sentiment analysis. Studies in Computational Intelligence, 710. pp. 379-390. ISSN 1860-949X
Melvin Gan Jet Hong and Yaofeng Zhu and Qing-Qing Ni (2019) Nanomaterials: electromagnetic wave energy loss. pp. 73-97.
Rosalam Sarbatly and Zykamilia Kamin (2013) The effects of kaolin/PESF ratios on the microstructures of kaolin hollow tubes. Developments in Sustainable Chemical and Bioprocess Technology. pp. 381-387. ISSN 978-1-4614-6207-1
Zhipeng Wang and Melvin Gan Jet Hong (2018) Carbon nanomaterials for energy storage devices. pp. 1-29.
Conference or Workshop Item
Nagarajan, R. and Sainarayanan , Gopala and Sazali Yaacob and Porle, Rosalyn R. (2004) An improved object identification for NAVI. In: : IEEE Region 10 Conference on Analog and Digital Techniques in Electrical Engineering, 21-24 November 2004 , Chiang Mai, Thailand.
Chang, Kee Tong and Chin, Kim On and Jason Teo and Chua, Bih Lii (2011) Automatic Generation of Real Time Strategy Tournament Units using Differential Evolution. In: UNSPECIFIED. (Unpublished)
Awang Bono and H.K. Chiw and Nur Maizura Ismail and S.M. Anisuzzaman and Sariah Binti Saalah (2011) Effects of various particles size of PKM as filler in Melamine-Urea Formaldehyde (MUF) resin on performance. In: ICCEAM, 28-30 Mei 2011, China. (Submitted)
Muralindran Mariappan, and Manimehala Nadarajan, (2013) A labVIEW design for frontal and non- frontal human face detection system in complex background. In: 2013 2nd International Conference on Mechanical Design and Power Engineering, ICMDPE 2013, 29 November 2013 - 30 November 2013, Beijing.
Nader Nassif Barsoum and Pandian Vasant and Arijit Bhattacharya and Cvetko Andreeski and T. Kolemisevska and A.T. Dinibütün (2006) Decision making in Toc-Product-Mix selection VIA fuzzy cost function optimization. In: IFAC Conference on Supplemental Ways for Improving International Stability Through Automation ISA '06, 15-17 June 2006, Prishtina.
Nader Nassif Barsoum and Pandian Vasant (2007) Balancing cost, operation and performance in integrated Hydrogen Hybrid Energy System. In: First Asia International Conference on Modelling and Simulation (AMS 2007), 27-30 March 2007, Phuket, Thailand.
Nurmin Bolong and Ismail Saad and Khairul Anuar Mohamad and Bablu K. Ghosh and H.M. Zuhir and C Bun Seng and Razali Ismail and U. Hashim (2013) Performance analysis of single and dual channel vertical strained SiGe impact ionization MOSFET (VESIMOS). In: Micro and Nanoelectronics (RSM), 2013 IEEE Regional Symposium.
Ismail Saad and H.M. Zuhir and Nurmin Bolong and Khairul Anuar Mohamad and Bablu K. Ghosh and Razali Ismail (2013) Mobility enhancement on Vertical Strained-SiGe Impact Ionization MOSFET incorporating Dielectric Pocket (VESIMOS-DP). In: TENCON 2013 - 2013 IEEE Region 10 Conference (31194).
Yew, Hoe Tung and Supriyanto Eko and Satria M. H. and Hau, Yuanwen (2016) Adaptive network selection mechanism for telecardiology system in developing countries. In: 3rd IEEE EMBS International Conference on Biomedical and Health Informatics, BHI 2016, 24 February 2016 through 27 February 2016, Las Vegas, United States.
Mohd Kamel Wan Ibrahim and R.S. Dwyer-Joyce (2013) Data synchronization for dynamic contact measurement. In: International Tribology Conference Malaysia 2013, 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.
Liew, Chiang Kang (2016) Mechanical properties of 3 ply plywood made from Acacia Mangium Veneers and green Starch-based Adhesives. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1-2 May 2016, Phuket, Thailand.
Jamal Ahmad Dargham, and Ali Chekima, and Chin , Renee,Ka Yin and Farrah Wong, (2013) A direct assessment method of the achievement of the program outcomes from the courses outcomes. In: Engineering Education (ICEED), 2013 IEEE 5th Conference , 4-5 Dec. 2013.
Tze, Kenneth, Kin Teo and Ka, Renee,Yin Chin and Nittala Surya Venkata Kameswara Rao (2016) Vehicle tracking using particle filter for parking management System. In: Artificial Intelligence with Applications in Engineering and Technology (ICAIET), 2014 4th International Conference, 3-5 Dec. 2014.
Awang Nasrizal Awang Ali and Mohd Yazid Mohd Anas Khan and Nurmin Bolong and Khairul Anuar Maarof and Siti Hasnah Tanalol (2020) Conceptual and design framework for smart stormwater filtration. In: 2020 IEEE 2nd International Conference on Artificial Intelligence in Engineering and Technology (IICAIET), 26-27 Sep 2020, Kota Kinabalu, Malaysia.
Fatihah Anas Muhiddin and Jumat Sulaiman and Andang Sunarto (2021) Solving time-fractional parabolic equations with the four. In: International Conference on Computational Science and Technology, ICCST 2020, 29 - 30 August 2020, Pattaya, Thailand.
Ismail Saad and Andee Hazwani Syazana B and Mohd Zuhir Hamzah and Bun Seng, C and Nurmin Bolong (2015) Equivalent circuit model analysis of vertical impact ionization MOSFET (IMOS). In: 3rd International Conference on Artificial Intelligence, Modelling and Simulation, 2-4 December 2015, Kota Kinabalu, Malaysia.
Jidon Janaun and Nancy Julius Siambun and Nurliyana Nasuha Safie (2016) Synthesis and characterization of supported sugar catalyst by dip coating method. In: IOP Conf. Series: Earth and Environmental Science.
Labiyana Hanif Ali and Jumat Sulaiman and M.M. Xu and Azali Saudi (2021) Newton-SOR with quadrature scheme for solving nonlinear fredholm integral equations. In: International Conference on Computational Science and Technology, ICCST 2020, 29 - 30 August 2020, Pattaya, Thailand. (In Press)
Mohd Suffian Misaran and Rosalam Sarbatly and Awang Bono and M.M. Rahman (2016) Effect of extrusion rate on morphology of Kaolin / Poly Ether Sulfone (PESf) membrane precursor. In: International Engineering Research and Innovation Symposium (IRIS), 24 - 25 November 2016, Kings Green Hotel Melaka, Malaysia.
N. A. M. Ali and Jumat Sulaiman and N. S. Mohamad and Azali Saudi (2021) The similarity finite difference solutions for two-dimensional parabolic partial differential equations via SOR iteration. In: International Conference on Computational Science and Technology, ICCST 2020, 29 - 30 August 2020, Pattaya, Thailand.
S. M. Anisuzzaman and Duduku Krishnaiah and Awang Bono and S Abang and M Sundang and Emma Suali and Farhana Abd Lahin and A Shaik Alawodeen (2016) Synthesis and characterization of metal oxide promoted alumina catalyst for biofuel production. In: IOP Conference Series: Earth and Environmental Science.
Sylvester Kenneth Sedah and Ana Sakura Zainal Abidin and A. Rigit and Mohd Azlan Ismail and Raudhah Ahmadi and Md Abdul Mannan (2017) Development of wind tunnel for ultrafine palm oil fuel ash separator. In: The 9th International Unimas Stem Engineering Conference (ENCON 2016), 26 - 28 October 2016, Kuching, Sarawak.
Research Report
Chin, Kim On and Patricia Anthony and Boo, Vooi Keong and Rosalam Sarbatly (2012) Meta search engine powered by DBpedia. (Unpublished)
Chu, Chi Ming and Sivakumar Kumaresan and Tham Heng Jin (2013) A study of mechanism for the prevention of cold inflow into Chimneys using wire mesh. (Unpublished)
Nooralisa Mohd Tuah and Nuraini Jamil and Dg. Senandong Ajor (2009) Retrieval based on skin color to detect the malicious images. (Unpublished)
Saturi Baco (2015) Study On electrical and structure properties of Metakaolin Geopolymer/Carbon Nanofibers (CNFs) Nanocomposite. (Unpublished)
Teo, Kenneth Tze Kin and Yew, Hoe Tung and Lye, Scott Carr Ken and Lim, Kit Guan and Ang, Soo Siang and Khairul Anuar Mohamad and Ali Chekima and Liau, Chung Fan and Aroland Jilui Kiring (2012) An extended adaptive mechanism of evolutionary based channel assignment via reinforcement. (Unpublished)
Thesis
Lim, Eng Har (2008) Determination of KIC fracture toughness by crack initiation of a compact tension steel specimen. Masters thesis, Universiti Malaysia Sabah.
Tan, Chee Leong (2007) Simulation of semiconductor laser using circuit level modeling. Masters thesis, Universiti Malaysia Sabah.
Lim, Siew Hooi (2008) Automatic markerless pose estimation for human in short sleeve or long sleeve attire. Masters thesis, Universiti Malaysia Sabah.
Mohd Aidy Faizal Johari (2008) Mode - I low cycle fatigue delamination of woven glass fibre reinforced polymer matrix composite. Masters thesis, Universiti Malaysia Sabah.
Ng, Chee Hiong (2010) Studies on precast reinforced concrete floor panels using oil palm shell aggregate. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Universiti Malaysia Sabah.
Sebastian Dayou (2013) Friction and wear behaviour of aluminium chromium nitride coating and palm oil methyl ester lubrication. Masters thesis, Universiti Malaysia Sabah.
Ervin Gubin Moung (2013) Comparison of face recognition techniques: the effects of features and parameters setting. Masters thesis, Universiti Malaysia Sabah.
Chong, Chee Siang (2018) Dynamic responses of plates and slabs due to impact loads. Doctoral thesis, University Malaysia Sabah.
Dzul Fahmi Mohd Husin Seria (2019) Fabrication of hybrid Zno/Tips-Pentacene organic based diode using spray coating technique. Masters thesis, Universiti Malaysia Sabah.
Janifal Alipal (2019) An image processing technique for mental health assessment from Electrophotonic. Masters thesis, Universiti Malaysia Sabah.
Manimehala Nadarajan (2016) Development of real-time multi pose face recognition and tracking system. Masters thesis, Universiti Malaysia Sabah.
Muhammad Iqbal Hashmi (2002) Distribution of metals in fruits, vegetables and shellfish of Sabah. Post-Doctoral thesis, Universiti Malaysia Sabah.
Nelly Majain (2016) Evaluation of strength characteristics of mortar and concrete during curing using EMI and surface wave propagation techniques. Masters thesis, Universiti Malaysia Sabah.
Roonie Protasius (2016) Effect of carburisation process on the wear of steel. Masters thesis, Universiti Malaysia Sabah.