Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA1-2040 Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials"

A

A N Amir and H Ghazali and H Wang and L Ye and N A Fadil and W F F W Ali and Khadizah Ghazali and Rubena Yusoff (2022) Fracture energy for orthogonal cutting in unidirectional CFRP at different cutting directions. In: Material and Energy Engineering for Sustainable Advancement (MEESA 2021), 29 - 30 September 2021, Kota Kinabalu, Sabah, Malaysia.

Abdul Karim Mirasa and Siti Nurmasyittah Ag Besar and Hidayati Asrah and Nurul Shahadahtul Afizah Asman and Nurmin Bolong and Lim Chung Han (2019) Effect of quarry dust as a sand replacement on the properties of interlocking brick. International Journal of Advanced Science and Technology, 28 (8s). pp. 89-96. ISSN 2005-4238

Abdul Khidil Ahmadul (2022) The analysis of heat transfer of the eco pozzolan mixture with concrete at high temperatures. Universiti Malaysia Sabah. (Unpublished)

Adriana E. Amaludin and Hidayati Asrah and Habib M. Mohamad and Hassanel Z. bin Amaludin and Nazrein A. bin Amaludin (2023) Physicochemical and microstructural characterization of Klias Peat, Lumadan POFA, and GGBFS for Geopolymer Based Soil Stabilization. HighTech and Innovation Journal, 4 (2). pp. 1-23. ISSN 2723-9535

Ahad Amini Pishro and Zhengrui, Zhang and Mojdeh Amini Pishro and Xiong, Feng and Zhang, Lili and Yang, Qihong and Siti Jahara Matlan (2022) UHPC-PINN-parallel micro element system for the local bond stress-slip model subjected to monotonic loading. Structures, 46. pp. 570-597. ISSN 2352-0124

Ahmad Nurfaidhi Rizalman and Hii, Yung Seng and S.M. Iqbal S. Zainal and Noor Sheena Herayani Harith (2022) Effect of water-binder ratio on properties of self-compacting concrete containing palm oil fuel ash. International Journal of Advanced Research in Technology and Innovation, 4 (1). pp. 28-34. ISSN 2682-8324 (E-ISSN)

Ailie Sofyiana Serasa and Abdul Ghani Rafek and Wan Salmi Wan Harun and Muslim Abdurrahman and Lee Khai Ern and Nguyen Xuan Huy and Tran Van Xuan and Rodeano Roslee and Mingwei Zhang and Goh Thian Lai (2022) Correlation of dynamic and static young’s modulus for limestone.

Anand Ryan Thurairajah and Ahmad Nurfaidhi Rizalman and Eliezer Nevall Anthony and McRoyce Donovan Dagul and Rosalam Sarbatly (2024) Engineering properties of cement-paste with polypropylene and carbon fibres. Journal of Advanced Research in Applied Mechanics, 115. pp. 1-9. ISSN 2289-7895

Asmawan Mohd Sarman and Lim, Chung Han and Allan Lumberio Lim and Elis Mardzianah Mazlan and Muhammad Muizzuddin Mukhtar (2022) Potential opportunities and strategy of Building Information Modelling (BIM) in Malaysian infrastructure construction. Transactions on Science and Technology, 9 (2-2). pp. 103-110.

B

Babak Golchin and Muhammad Nazmi Abdul Rahman and Noor Halizah Abdullah and Lillian Gungat (2023) The effect of fine aggregate gradation and filler type on the rheological properties of asphalt. Transactions on Science and Technology, 10 (2). pp. 1-7. ISSN 2289-8786

Brabha Hari Nagaratnam (2016) Experimental studies on self-compacting concrete mixed with palm oil fuel ash and fly ash. Doctoral thesis, Universiti Malaysia Sabah.

Broneca Sibin (2022) Experimental and modelling studies of mortar containing eggshell powder and silica fume. Masters thesis, Universiti Malaysia Sabah.

C

Chee, Siang Chong and Hidayati Asrah and Paramasivam Suresh Kumar and Md. Abdul Mannan (2011) Optimisation of concrete mix design using sandstone reactive aggregate in Sabah. Malaysian Construction Research Journal, 9 (2). pp. 49-62. ISSN 1985-3807

Charles Michael Albert and Liew, Kang Chiang (2023) Recent development and challenges in enhancing fire performance on wood and wood-based composites: A 10-year review from 2012 to 2021. Journal of Bioresources and Bioproducts, 9. pp. 27-42. ISSN 2369-9698

Chea Wan Chin (2022) Comparing common methods of assessing pozzolanic reactivity assessment of pozzolanic reactivity for grinding spent bleaching earth ash (SBEA). Universiti Malaysia Sabah. (Unpublished)

Choong, Wai Heng and H H Hamidi and Yeo, K B (2022) Self-healing efficiency study of thermoset-thermoplastic polymer material. In: Material and Energy Engineering for Sustainable Advancement (MEESA 2021), 29 - 30 September 2021, Kota Kinabalu, Sabah, Malaysia.

D

Debbie Nur Allysa Mattius (2022) Development of synthetic-coconut hybrid fiber reinforced mortar. Universiti Malaysia Sabah. (Unpublished)

E

E Arot and Hidayati Asrah and Lim, C H (2022) A review on the effect of crumb rubber in civil engineering applications. In: 14th Seminar on Science and Technology 2021 (S&T 2021) (Virtual Conference), 8 - 9 September 2021, Virtually.

Eddy Syaizul Rizam Abdullah (2017) Comparative study on the effect of palm oil fuel ash in supressing the alkali silica reaction for concrete and mortar. Masters thesis, Universiti Malaysia Sabah.

Eddy Syaizul Rizam Abdullah and Abdul Karim Mirasa and Hidayati Asrah (2015) Review on the effect of palm oil fuel ash (POFA) on concrete. Journal of Industrial Engineering Research, 1. pp. 1-4. ISSN 2077-4559

Elizer Nevall Anthony and Ahmad Nurfaidhi Rizalman and Anand Ryan Thurairajah and S.M. Iqbal S. Zainal and Muhd Fauzy Sulaiman (2024) Mixing sequence effect of cement composites with carbon fibres. IIUM Engineering Journal, 25 (1). pp. 1-11.

Eunice Lua Hanry and Noumie Surugau (2023) Characterization of bioplastics developed from whole seaweed biomass (Kappaphycus sp.) added with commercial sodium alginate. Research Square. pp. 1-14. ISSN 2693-5015

F

Fadzlita Mohd Tamiri and Yeo, Kiam Beng and Choong, W.H. and Melvin, M. (2014) Absorption coefficient of acoustic coir fibre panel and effects of varying percentage of perforated plates. Journal of Applied Sciences, 14. 3106 - 3109. ISSN 1812-5654 (P-ISSN) , 1812-5662 (E-ISSN)

Farmizan Pirman and Asmahani Awang (2019) Enhanced mechanical properties plaster of Paris with addition of rice husk fibers.

Fatirah Fadil and Nor Dalila Nor Affandi and Mohd Iqbal Misnon and Noor Najmi Bonnia and Ahmad Mukifza Harun and Mohammad Khursheed Alam (2021) Review on electrospun nanofiber-applied products. Polymers, 13 (2087). pp. 1-29. ISSN 2073-4360

Fauziah Sulaiman and Syafiqa Putri Adlina Harun and Elnetthra Folly Eldy (2023) Lift-Off Effect Evaluation by Using Eddy Current Testing Technique on Copper (C101). International Journal of Emerging Technology and Advanced Engineering, 13. pp. 53-62.

Ferlorna Freddie John Luji and Teo, Kenneth Tze Kin and Tan, Soo Fun and Yoong, Hou Pin (2021) Heating and cooling mechanisms for sma actuator - A brief review. Transactions on Science and Technology, 8 (3). pp. 425-431. ISSN 2259-8786

Floressy Juhim and Fuei Pien Chee and Asmahani Awang and Pak Yan Moh and Khairul Anuar Mohd Salleh and Sofian Ibrahim and Jedol Dayou and Amani Alalawi and M.S. Al-Buriahi (2023) Study of gamma radiation shielding on tellurite glass containing TiO2 and Al2O3 nanoparticles. Sciencedirect, 9. pp. 1-14. ISSN 2352-3409

Florinna Tan (2018) Preparation and characterization of nanocellulose thin film from brown seaweed (sargassum sp.) reinforced x-carbon nanotube/polyvynil alcohol composites. Masters thesis, Universiti Malaysia Sabah.

H

Hana Mohd Zaini and Suryani Saallah and Jumardi Roslan and Nurul Shaeera Sulaiman and Elisha Munsu and Noorakmar Ab. Wahab and Wolyna Pindi (2023) Banana biomass waste: A prospective nanocellulose source and its potential application in food industry – A review. Heliyon. pp. 1-16. ISSN 2405-8440

Harold Harrison and Mazlina Mamat and Farrah Wong Hock Tze and Hoe Tung Yew (2024) A novel and refined contactless user feedback system for immediate on-site response collection. International Journal of Advanced Computer Science and Applications (IJACSA), 15 (7). pp. 1-8. ISSN 2156-5570

Hongtao Li and Nancy Julius Siambun and Chua, Bih Lii and Gan, Melvin Jet Hong and Hongen An (2021) Microstructure transition and grain refinement mechanism of undercooled alloys. Journal Wuhan University of Technology, Materials Science Edition, 36. pp. 922-926. ISSN 1000-2413

I

I.C. Moison and Lillian Gungat and Hidayati Asrah and F.H. Chiew (2022) A Review of Eggshell Powder and Fly Ash-Based Geopolymers Concrete. In: International Conference on Civil Engineering and Construction Technology (ICECon 2021), 14/12/2021 - 15/12/2021, Online.

Ian Roderick Jaffery (2022) Experimental investigation on the performance of interlocking brick wall with opening-window. Universiti Malaysia Sabah. (Unpublished)

J

Jackel Vui Lung Chew and Jumat Sulaiman and Andang Sunarto (2021) Solving one-dimensional Porous Medium Equation using unconditionally stable Half-Sweep finite difference and SOR method. Mathematics and Statistics, 9. pp. 166-171. ISSN 2332-2071

Jodin Makinda and Heah Yee Ling and Elsa Eka Putri (2024) Effects of natural fibre reinforcement on the shear strength properties of soil. Jurnal Bangunan Konstruksi & Desain, 2 (1). pp. 1-9.

Joehanis Jabiul (2022) Local empty fruit bunch concrete an investigation on flexural performance. Universiti Malaysia Sabah. (Unpublished)

K

Kang, Chiang Liew and Ezzia Stecy Maining (2021) Mechanical and physical properties of cross-laminated timber made from batai using different glue spread amounts.

L

L.O Agbolade and Alaa Kamal Yousif Dafhalla and A.Wesam Al-Mufti and Z.A. Arsat and Tijjani Adam and Abdullah Chik and Subash c.B. Gopinath and M.N.A Uda and M.N. Afnan Uda and Uda Hashim (2024) Revisiting the optoelectronic properties of graphene: A DFT approach. International Journal of Nanoelectronics and Materials (IJNeaM), 17 (1). pp. 1-10. ISSN 198-5761

Liew, Kang Chiang (2011) Making and testing laboratory laminated veneer lumber: an illustrated guide. LAP Lambert Academic Publishing, -. ISBN 978-3-84-732428-7

Liew, Kang Chiang and A R Samin (2021) Mechanical properties of particleboard using acacia mangium wood particles binded with seaweed-based adhesives.

M

Mazlan Mohamed and Nor Rohimah Abdullah and Jidon Janaun and Hasyiya Karimah Adli2 and Mohamad Faiz Mohd Amin and Arman Shah and Muhammad Iqbal Ahmad (2023) Epoxy-graphene composite reinforced with bamboo biochar powder: Effect on mechanical properties. Transactions on Science and Technology, 10 (3). pp. 1-8. ISSN 2289-8786

Md Lutfor Rahman and Tapan Kumar Biswas and Shaheen M. Sarkar and Mashitah M. Yusoff and Mohd Sani Sarjadi and Sazmal Effendi Arshad and Baba Musta (2017) Adsorption of rare earth metals from water using a kenaf cellulose-based poly(hydroxamic acid) ligand. Journal of Molecular Liquids, 243. pp. 616-623. ISSN 0167-7322 (P-ISSN) , 1873-3166 (E-ISSN)

Micheal Abel (2022) Performance evaluation of crumb rubber mortar reinforced with synthetic and banana fibers. Universiti Malaysia Sabah. (Unpublished)

Mohd Aizzat Aizam Awang Japilan (2022) Experimental investigation on the performance of interlocking brick wall with opening-door. Universiti Malaysia Sabah. (Unpublished)

Mohd Azrul Abdul Rajak and Nur Mizan Izzati Masran and Sazmal Effendi Arshad and Eddy Mohd Farid Mohd Yusslee (2021) Morphology of lightweight metakaolin-based geopolymer polystyrene composite paste at early ages. Transactions on Science and Technology, 8 (2). pp. 273-280. ISSN 2289-8786

Mohd Azrul Abdul Rajak and Zaiton Abdul Majid and Mohammad Ismail (2023) Hydration of Hardened Cement Paste Incorporates Nano-Palm Oil Fuel Ash at Later Age: The Microstructure Studies. Malaysian Journal of Chemistry, 25 (3). pp. 1-12.

Mohd Azrul Abdul Rajak and Zaiton Abdul Majid and Mohammad Ismail (2021) The effects of nanosized-palm oil fuel ash on early age hydration of hardened cement paste: The microstructure studies. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82. pp. 87-95. ISSN 2289-7879

Mohd Jin Husin (2011) Kandungan aflatoksin dalam kacang tanah diimport ke Sabah pada tahun 2008 - 2010. Masters thesis, Universiti Malaysia Sabah.

Mohd Suffian Misaran @ Misran (2017) Shear rate effect on asymmetric kaolin-polyethersulfone hollow fibre membrane. Doctoral thesis, Universiti Malaysia Sabah.

Mohd Sukhairi Mat Rasat and Mohamad Faiz Mohd Amin and Razak Wahab and Muhammad Iqbal Ahmad and An’amt Mohamed Noor and Janshah Moktar and Noor Janatun Naim Jemali and Nur Kyariatul Syafinie Abdul Majid and Norhafizah Rosman and Junaiza Ahmad Zaki and Nur Hannani Abdul Latif (2023) Effects of torrefaction process on chemical properties of small diameter Acacia Mangium wood.

Mohd Sukhairi Mat Rasat and Razak Wahab and Amran Shafie and Ag Ahmad Mohd Yunus and Mahani Yusoff and Sitti Fatimah Mhd. Ramle and Zulhisyam A.K (2013) Effect of Wood-fiber geometry size on Mechanical Properties of Wood-fiber From Neolamarckia Cadamba Species Reinforced Polypropylene Composites. Journal of Tropical Resources and sustainable sciences, 1 (1). pp. 42-50. ISSN 2289-3946 (P-ISSN) , 2462-2389 (E-ISSN)

MohsenM.A. Abdelhafez and Karim A.M. Ahmed and Nashwa A.M. Ahmed and MohdHamdy Ismail and Mohd Nazri Mohd Daud and Nicholas Tze Ping Pang and AyaM. Eldiasty and Mohd Fariz Amri and Mohammad Saffree Jeffree and Fairrul Kadir and Dg Marshitah Pg Baharuddin and Mohammed Firdaus Bin Bolong and Firdaus Hayati and Nornazirah Bt Azizan and Doreen Sumpat and Syed Sharizman Syed Abdul Rahim and Ehab Helmy Abdel Malek Fahmy (2023) Psychiatry illnesses in Pregnancy: A Literature review. Heliyon, 9. pp. 1-9. ISSN 2405-8440

Mojtaba Dayer and Ag Sufiyan Abd Hamid and Kamaruzzaman Sopian and Adnan Ibrahim and Anwer. B. Al-Aasam and Bassam Abdulsahib and Saeed Rahmanian (2023) Performance of Combined PCM/Metal Foam-based Photovoltaic Thermal (PVT) Collector. International journal of renewable energy research, 13 (2). pp. 1-10.

Muhammad Fadzlih Baharudin (2022) Design and development of a hot press machine for composite material fabrication application. Universiti Malaysia Sabah. (Unpublished)

Muhd Fauzy Sulaiman and Nuratiqah Ruslin and Elisa Jikino and Nelly Majain and Siti Nor Farhana Zakaria and Habib Musa Mohamad and Chung Han Lim (2024) The effect of sawdust as self-curing agent in concrete. Jurnal Teknologi, 86 (3). pp. 1-7. ISSN 2180-3722

N

Nelly Majain (2022) Bond behaviour of deformed steel rebars in steel fibre high- strength self-compacting concrete. Doctoral thesis, Universiti Teknologi Malaysia.

Newati Wid and Fatin Sualin (2023) Phosphorus recovery from different composition of food waste using anaerobic digestion.

Nicholas Mondinos and Mohammednoor Altarawneh and Amun Amri and Willey Yun Hsien Liew and Gerrard Eddy Jai Poinern and Zhong-Tao Jiang (2023) Monatomic reactions with single vacancy monolayer h-BN: DFT studies. RSC Advances. pp. 1-12. ISSN 2046-2069

Noor Maizura Ismail and Ahmad Fauzi Ismail and A B Mustafa and T. Matsuura and Tetsuo Soga and K. Nagata and Toru Asaka (2015) Qualitative and quantitative analysis of intercalated and exfoliated silicate layers in asymmetric polyethersulfone/cloisite15A® mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Journal, 268. pp. 371-383. ISSN 1385-8947

Noor Sheena Herayani Harith and Felix Tongkul and Azlan Adnan (2022) Seismic hazard curve as dynamic parameters in earthquake building design for Sabah, Malaysia. Buildings, 13. pp. 1-16.

Norliza Julmohammad and E.Tan and W Y Koh and S, Soloi (2024) Assessing synthetic milk through the detection of anionic detergents in milk: a concise review. Earth and Environmental Science. pp. 1-12.

Norsakinah Johrin and Fuei Pien Chee and Syafiqa Nasir and Pak Yan Moh (2023) Numerical study and optimization of GO/ZnO based perovskite solar cell using SCAPS. AIMS Energy, 11. pp. 1-11. ISSN 2333-8334

Nur Alyaa Mohd Nasir and Nurhazimah Nazmi and Norzilawati Mohamad and Ubaidillah Ubaidillah and Nur Azmah Nordin and Saiful Amri Mazlan and Siti Aishah Abdul Aziz and Muhammad Kashfi Shabdin and Nurul Azhani Yunus (2021) Rheological performance of magnetorheologcal grease with embedded graphite additives. Materials, 14. pp. 1-15. ISSN 19961944

Nurul Hidayah Hussin and Roswanira Abdul Wahab and Nursyafiqah Elias and Adikwu Gowon Jacob and Mohamad Hamdi Zainal-Abidin and Faizuan Abdullah and Nurul Jannah Sulaiman and Mailin Misson (2021) Electrospun Magnetic Nanocellulose-PolyethersulfoneConjugated Aspergillus oryzae Lipase for Synthesis of Ethyl Valerate. Membranes, 11. pp. 1-23. ISSN 2077-0375

Nurul Hidayah Hussin and Roswanira Abdul Wahab and Nursyafiqah Elias and Adikwu Gowon Jacob and Mohamad Hamdi Zainal-Abidin and Faizuan Abdullah and Nurul Jannah Sulaiman and Mailin Misson (2021) Electrospun magnetic nanocellulose–polyethersulfone-conjugated aspergillus oryzae lipase for synthesis of ethyl valerate. Membranes, 11 (972). pp. 1-23. ISSN 2077-0375

P

Paramasivam Suresh Kumar (2006) A study on high performance concrete using sandstone aggregates. Doctoral thesis, Universiti Malaysia Sabah.

R

Raihana Farahiyah Abd Rahman (2023) Sulphate attack resistance of mortar containing spent bleaching earth ash. Doctoral thesis, Universiti Malaysia Sabah.

Raihana Farahiyah Abd Rahman and Hidayati Asrah and Ahmad Nurfaidhi Rizalman and Abdul K. Mirasa (2023) Performance of mortar containing ground spent Bleaching earth ash against sulfate attack. International Journal of GEOMATE, 25. pp. 1-8. ISSN 2186-2982

Reva Edra Nugraha and Didik Prasetyoko and Nurul Asikin-Mijan and Hasliza Bahruji and Suprapto Suprapto and Yap, Taufiq Yun Hin and Aishah Abdul Jalil (2021) The effect of structure directing agents on micro/mesopore structures of aluminosilicates from Indonesian kaolin as deoxygenation catalysts. Microporous and Mesoporous Materials, 315. pp. 1-13. ISSN 1387-1811

Roonie Protasius (2016) Effect of carburisation process on the wear of steel. Masters thesis, Universiti Malaysia Sabah.

Rosdianah Ramli (2017) Operational performance of hollow fibre for water treatment system. Masters thesis, Universiti Malaysia Sabah.

Rubia I. and Puvaneswaren K and Sazmal E.A and Moh P.Y and Noraini A. and Shaheen M.K. and Jahimin A.A. (2015) Comparative study of the electro spun pan nanofiber reinforced with CNT and CNF: effect on morphology, thermal stability and electroconductivity properties. Advanced Materials Research, 1107. pp. 295-300. ISSN 1662-8985

S

S. M. Sapuan and A. Leenie and Mohd Harimi and Beng, Yeo Kiam (2006) Mechanical properties of woven banana fibre reinforced epoxy composites. Materials and Design, 27 (8). pp. 689-693. ISSN 0261-3069

Salmia Santa (2020) Optimum distance of lift-off height to detect defect on testing materials using eddy current testing technique. Masters thesis, Universiti Malaysia Sabah.

Salmia Santa and Fauziah Sulaiman and Elnetthra Folly Eldy (2019) Optimisation frequency for different lift off on aluminium using Eddy Current Testing (ECT) technique. Transactions on Science and Technology, 6 (2-2). pp. 191-197.

Sazmal Effendi Arshad and Nurul Fatiha M.Padzli and Awang Nazrul A.M. (2021) The role of temperature and time in the synthesis of SnO2/reduced graphene oxide composites via conventional method.

Sebastian Dayou (2013) Friction and wear behavior of aluminium chromium nitride coating and palm oil methyl ester lubrication. Doctoral thesis, Universiti Malaysia Sabah.

Shamsi Ebrahimi and Yusoff Umul Hanim and Coswald Stephen Sipaut @ Mohd Nasri and Norsazlina Ahmad Jan and Sazmal E. Arshad and Siew, Eng How (2021) Fabrication of Hydroxyapatite with Bioglass Nanocomposite for Human Wharton’s-Jelly-Derived Mesenchymal Stem Cell Growing Substrate. International Journal of Molecular Sciences, 22. pp. 1-15.

Sharifah Rasul (2022) Pozzolanic activity evaluation of spent bleaching earth ash strength activity index, frattini test and saturated lime test. Universiti Malaysia Sabah. (Unpublished)

Sheikh Mohd Iqbal S Zainal Abidin and Farzad Hejazi and Farah Nora Aznieta Abd. Aziz and Mohd Saleh Jaafar (2021) The synergistic effects of different types of hybridized synthetic fibers on concrete post-crack residual strength. KSCE Journal of Civil Engineering. pp. 1-12. ISSN 1226-7988 (P-ISSN) , 1976-3808 (E-ISSN)

Sheikh Mohd Iqbal S Zainal Abidin and Farzad Hejazi and Raizal S. M. Rashid (2021) Enhancing the Performance of Knee Beam-Column Joint using Hybrid Fibers Reinforced Concrete. International Journal of Concrete Structures and Materials, 15. pp. 1-28. ISSN 1976-0485 (P-ISSN) , 2234-1315 (E-ISSN)

Sheikh Mohd Iqbal S Zainal Abidin and Farzad Hejazi and Raizal S. M. Rashid (2021) Enhancing the Performance of Knee Beam– Column Joint Using Hybrid Fibers Reinforced Concrete. International Journal of Concrete Structures and Materials, 15 (20). pp. 1-28. ISSN 1976-0485 (P-ISSN) , 2234-1315 (E-ISSN)

Sheikh Mohd Iqbal S Zainal Abidin and Farzad Hejazi and Raizal S. M. Rashid (2021) Enhancing the Performance of Knee Beam– Column Joint Using Hybrid Fibers Reinforced Concrete. International Journal of Concrete Structures and Materials, 15 (20). pp. 1-28. ISSN 1976-0485 (P-ISSN) , 2234-1315 (E-ISSN)

Siti Aishah Abdul Aziz and Saiful Amri Mazlan and Ubaidillah Ubaidillah and Norzilawati Mohamad and Sedlacik, Michal and Nur Azmah Nordin and Nurhazimah Nazmi (2021) Loss factor behavior of thermally aged magnetorheological elastomers. Materials, 14. pp. 1-16. ISSN 1996-1944

Siti Aishah Muhammad Khalidi and Mohd Khalizan Sabullah and Rahmath Abdullah and Diana Demiyah Mohd Hamdan and Siti Aqlima Ahmad and Mohd Yunus Shukor (2022) Preliminary screening and comparison of heavy metal pollution in two Malaysia Class II river using acetylcholinesterase from monopterus albus.

Siti Asiyah Kasdi and Seng Hua Lee and Paridah Md. Tahir and Syeed SaifulAzry Osman Al-Edrus and Sabiha Salim and Muhammad Aizat Abd Ghani and Balkis Fatomer A Bakar and Wei Chen Lum and Jun Zhang (2023) Characterization of the properties of buluh madu (gigantochloa albociliata). BioResources, 18 (4). pp. 1-13. ISSN 1930-2126

Siti Ayu Aziz and Sabrina Soloi and Hidayati Asrah and Juferi Idris and Mohd Sani Sarjadi (2022) The conformation and thermal characteristic of different species of bamboo cellulose.

Siti Sarah Junian (2017) Effect of silica and pofa on electrical, physical and mechanical properties of linear low-density polyethylene-natural rubber composite. Masters thesis, Universiti Malaysia Sabah.

Sow, Chan On (2023) Effect of quenching and post heat-treatment process to the microstructure and physical properties of electro-carb. Masters thesis, Universiti Malaysia Sabah.

Suffian Abdul Karim (2022) Spent bleaching earth ash (SBEA) as silica fume replacement in ternary blended concrete. Universiti Malaysia Sabah. (Unpublished)

Syafiqa Nasir and Fuei, Pien Chee and Bablu Kumar Ghosh and Muhammad Izzuddin Rumaling and Rosfayanti Rasmidi and Mivolil Duinong and Floressy Juhim (2023) Composition Dependence Structural and Optical Properties of Silicon Germanium (SiχGe1−χ) Thin Films. Crystals, 13. pp. 1-11.

Syafiqa Putri Adlina Harun (2023) Evaluation of lift-off effect on surface defect metal with non non-conductive coating by using eddy current testing technique. Masters thesis, Universiti Malaysia Sabah.

Syafiqah Syazwani Jaffar and Suryani Saallah and Mailin Misson and Shafiquzzaman Siddiquee and Jumardi Roslan and Sariah Saalah and Wuled Lenggoro (2022) Recent Development and Environmental Applications of Nanocellulose-Based Membranes. Membranes, 12 (3). pp. 1-34.

Syaza Syazvina Anwar (2022) Assessment of pozzolanic reactivity for calcined spent bleaching earth ash (SBEA) using strength activity index (SAI), frattini test and x-ray diffraction (XRD). Universiti Malaysia Sabah. (Unpublished)

T

Teo, D. C. L. and Md Abdul Manan and Kurian, John J. (2006) Flexural behaviour of reinforced lightweight concrete beams made with oil palm shell (OPS). Journal of Advanced Concrete Technology, 4 (3). pp. 459-468. ISSN 1346-8014

Teo, Delsye Ching Lee (2007) A study on structural lightweight concrete using Oil Palm Shell (OPS) aggregate. Doctoral thesis, Universiti Malaysia Sabah.

Tang, Zi Sheng (2017) Development of electrospinning process for nanofibres fabrication. Masters thesis, Universiti Malaysia Sabah.

Thomas Tan (2019) Bond strength of corroded high yield steel bars embedded in normal strength concrete. Masters thesis, Universiti Malaysia Sabah.

U

Uun Yanuhar and Heru Suryanto and Muhamad Amin and Jibril Maulana and Mohammad Tamrin Mohamad Lal and Nico Rahman Caesar (2024) The impact of copper oxide nanoparticles reinforced nanocellulose acetate membrane on antibacterial and dye removal potency. Results in Engineering, 23. pp. 1-11. ISSN 2590-1230

V

Valeritta Lodin and Paridah Md Tahir and Ag Ahmad Mohd Yunus and Ismawati Palle (2023) Effect of isocyanate index on shear strength plywood properties using acacia mangium polyurethane-based adhesive.

W

Wu, Fei and Wang, Bo and Lim, Thien Sang (2021) Effects of covid-19 on the cost of construction enterprises: Case of China.

Y

Yeo, Kiam Beng and Mohd Noh Dalimin and Mohd Aidy Faizal Johari (2007) Mode-I toughness and curing pressure characteristic of symmetrical lay-up of plain-weave woven GFRP composites. Journal of Applied Sciences, 7 (15). pp. 2174-2182. ISSN 1812-5654

Yang, Jun (2023) Influence of crystal orientation on the corrosion behaviour of copper, aluminium and niobium studied using first-principles calculation. Doctoral thesis, Universiti Malaysia Sabah.

Yaojia Li and Mantihal Sylvester and Ai Ling Ho and Jau-Shya Lee (2024) Effect of inulin and xanthan gum on the properties of 3D printed Tartary buckwheat paste. Journal of Food Technology Research, 11 (1). pp. 1-16. ISSN 2312-6426

Yee, Yi Zhen (2022) Application of response surface method (RSM) in predicting the alkali silica expansion and alkali concentration of palm oil fuel ash (POFA) mortar. Universiti Malaysia Sabah. (Unpublished)

Yvonne William Tonduba (2023) Utilization of palm oil fuel ash in interlocking compressed earth brick. Doctoral thesis, Universiti Malaysia Sabah.

Z

Zatil Hafila Kamaruddin and Ridhwan Jumaidin and Rushdan Ahmad Ilyas and Mohd Zulkefli Selamat and Roziela Hanim Alamjuri and Fahmi Asyadi Md Yusof (2022) Influence of Alkali Treatment on the Mechanical, Thermal, Water Absorption, and Biodegradation Properties of Cymbopogan citratus Fiber-Reinforced, Thermoplastic Cassava Starch–Palm Wax Composites. Polymers, 14. pp. 1-26. ISSN 20734360

Zhipeng Wang and Yipei Li and Jian Liu and Gui Tian and Gang Liu and Mingxi Wang and Hironori Ogata and Wei Gong and Adavan Kiliyankil Vipin and Gan, Melvin Jet Hong and Josue Ortiz-Medina and Shingo Morimoto and Yoshio Hashimoto and Mauricio Terrones and Morinobu Endo (2021) Microwave plasma-induced growth of vertical graphene from fullerene soot. Carbon, 172. pp. 26-30. ISSN 0008-6223

Zykamilia Kamin (2011) Study of operating conditions on fabrication of a kaolin hollow fibre membrane. Masters thesis, Universiti Malaysia Sabah.