Synthesis And Characterisation Of Poly(Hydroxamic Acid And Amidoxime) Grafted Sago Starch Cheating Resin For Extraction Of Some Metal Ions

Tan, Boon Teong (2010) Synthesis And Characterisation Of Poly(Hydroxamic Acid And Amidoxime) Grafted Sago Starch Cheating Resin For Extraction Of Some Metal Ions. Masters thesis, Universiti Malaysia Sabah.

[img] Text
Synthesis And Characterisation Of Poly(Hydroxamic Acid And Amidoxime) Grafted Sago Starch Cheating Resin For Extraction Of Some Metal Ions 24pages.pdf

Download (487kB)
[img] Text
Synthesis And Characterisation Of Poly(Hydroxamic Acid And Amidoxime) Grafted Sago Starch Cheating Resin For Extraction Of Some Metal Ions.pdf
Restricted to Registered users only

Download (1MB)

Abstract

Sago starch (AGU, anhydro glucose unit) was used to prepared a poly(hydroxamic acid-amidoxime) chelating resin. Methyl acrylate (MA) and acrylonitrile (AN) were firstly graft copolymerized onto sago starch by using a free radical initiating process in which ceric ammonium nitrate was used as an initiator. The percentage of grafting was significantly dependent upon the concentration of mineral acid (H2SO4), ceric ammonium nitrate (CAN), MA, AN, as well as the reaction temperature and period. The highest yield was obtained when the concentrations of H2SO4, CAN, AN and MA were used at 0.7090 mol/L, 4 × 10-3 mol/L, 0.6016 mol/L and 0.4392 mol/L, respectively. The optimum temperature and reaction period were 50 ºC and 90 min, respectively. The conversion of ester and nitrile groups of the poly(methyl acrylate-co-acrylonitrile) (PMA-co-AN) grafted AGU into hydroxamic acid and amidoxime functional groups was then prepared via treatment of hydroxylamine under alkaline solution. The optimum poly(hydroxamic acid-amidoxime) (PHA-PA) chelating resin was obtained when concentration of hydroxylamine hydrochloride was used at 0.8634 mol/L; reaction temperature at 75 ºC; 2 hours of reaction period; while the varying pH value was pH 13. The optimization of the PHA-PA chelating resin was evaluated by measured the sorption capacity of the resin towards copper metal ion with batch method. The PMA-co-AN grafted AGU and PHA-PA were characterized by FT-IR spectroscopy. The chelating behavior of the prepared resin towards cadmium, chromium, copper and zinc metal ions were investigated by using batch method. The binding capacities of the optimum chelating resin towards these metal ions were observed and it exhibited high sorption capacity for copper which observed at 3.576 mmol/g, at pH 6 after 24 hours of reaction period. The maximum binding capacities of the optimum chelating resin towards cadmium, chromium and zinc metal ions were observed at 1.585 mmol/g, 1.658 mmol/g and 1.817 mmol/g, respectively; at pH 6 after 24 hours of reaction period. The optimum resin obtained also showed that it was capable to form a chelate complex when reacted with metal ions in trace level.

Item Type: Thesis (Masters)
Keyword: Sago starch , Ceric ammonium nitrate , Metal Ions
Subjects: Q Science > QD Chemistry > QD1-999 Chemistry > QD241-441 Organic chemistry
Q Science > QD Chemistry > QD1-999 Chemistry > QD241-441 Organic chemistry > QD415-436 Biochemistry
Department: FACULTY > Faculty of Science and Natural Resources
Depositing User: NORAINI LABUK -
Date Deposited: 06 Sep 2021 15:35
Last Modified: 06 Sep 2021 15:35
URI: https://eprints.ums.edu.my/id/eprint/30644

Actions (login required)

View Item View Item